Revive & Drive? Iowa Farm 68 F100 (with Ford's Immortal Engine) P.2

[@ThunderHead289]

any questions about the carb cheater stuff, feel free to ask - most of this project has been built off of solid suggestions from you guys - heck, one of you out there even came up with the name. (were the designers and programmers behind it) Heres the 0-60 datalog, this is exactly what you would have with your own carb cheater also: thecarbcheater.com/?db=9xdmz also, heres a log file of us turning the CC on and it doing its adaptive AFR control stuff: thecarbcheater.com/?db=S1tn8

[@jasonaxelson7721]

Would it be possible to use the carb cheater with a turbocharged 300? I am debating whether to go with efi or carb

[@ThunderHead289]

​@Jason Axelson I dont recommend using a carb for blownthrough. Unless it's only going to be doing wide open throttle, they are very difficult to tune well for all driving conditions. Draw through is no problem

[@michaelschoenau3305]

I really like the carb cheater concept. Simple yet seems very effective. I’ve had people question why I didn’t go with a “self tuning” efi kit for my 79 Bronco and choose a carb. Cost and simplicity. I’d love to get my hands on a carb cheater.

[@GUE5TPA55]

where and when to purchase?

[@jayburrough4308]

You should send bill one of those from old man garage KZbin channel he is a big carb guy and has there own carb line they do a lot of racing.. his son has a big KZbin channel to it's SRC street racing channel.i think it would get your product out there to a lot of people that would be able to put it to good use.good luck on everything buddy.lovd the channel

[@AFellowFloridian]

This is the realest dude on KZbin no joke. I could listen to this guy talk about anything

[@shabadoo24]

Luke explains everything in a relaxing way, Kevin from Junkyard Digs, Dylan McCool and Derek Bieri are the same way.

[@Robrt32]

I agree he knows what he’s talking about instead of making something up like other channels but that is the most used statement on KZbin. Almost every channel has someone claiming the same thing in some form or fashion.

[@AFellowFloridian]

@@Robrt32 lol alright rob

[@brianandglendaharkin9457]

Cold War motor is on the top list as well . 👍🏻🇦🇺💯⛽️

[@theskydiverdriver7193]

Yup !

[@AnthonyRBlacker]

I think you're going to see a big market for the Carb Cheater once you really get production up. I think ALL the old muscle car guys who are CARB ONLY and won't take the plunge into EFI just don't' want to deal with the computers and all, this thing is a GAME CHANGER! I love it!

[@ThunderHead289]

We also worked hard to make it under 400 bucks where even just a wideband alone (we have one built in to ours) is 200 dollars now. And even with efi, your still going to be tuning unlike what people seem to think. Personally I'll take a carb any day (and I'm even a heavy programmer by day at work, so that's saying something)

[@willallen7757]

Yeah it's perfect, I was thinking about breaking down and getting Holley injection but I'd much rather go this route.

[@AnthonyRBlacker]

Agreed. I'm in the same boat. I appreciate the honesty and hard work you put in. I feel like engineers are of a dying breed today, software is one thing, but hardware still keeps us moving forward and with today's progress and controllers we really can do anything.

[@AndyL940]

Carbs became obsolete for a reason… because fuel injection is 1000x better 😂

[@willallen7757]

@@AndyL940 and you think none of us knows that Einstein?

[@Tomsfoolery.]

Thanks for the mention at 4:55 man! Appreciate it! 😂

[@ThunderHead289]

That's hilarious

[@pugnos1]

Luke is so down to earth and humble. Honest about what he knows and what he is teaching himself. Has no problem venturing into what he is not familiar with .Luke and his business partner are gonna go leaps and bounds with their cheater carbs product

[@paulweigle6872]

Great job! That carb cheater is simplistic enough for us old guys to use. Glad to see a young engineer come up with it.

[@keithreilly386]

Glad to see that some young men are into old cars and trucks that is why I watch your videos

[@ThunderHead289]

Modern cars are soulless.

[@zymmer4]

The 300 is a legendary offering from Ford..It has a cross drilled, forged crank..like a 427..it has forged rods..it has forged pistons..it is a beast..Power Nation built one that made over 500 hp and over 500 ft.lb. of torque..I had one in my 1981 Bronco, New Process drive train for 475000 miles..before the body rusted off of the frame..everything else was fine..Long Live the Mighty 300 !!!

[@yeboscrebo4451]

I went searching for a 300 and found one finally in an old 70s telephone truck parked in the woods in Tahoe. I have it all fixed up and running good now with a flat bed and ready to work!

[@ratrodrigs9583]

Poor man's diesel

[@joeidaho5938]

Amazing development of your product, Luke. Pretty mind boggling that it went from this little idea.....to developing all the peripherals needed to make it work, including a phone app. You're doing amazing work!

[@ThunderHead289]

The prototype was acceptable, but once joe was involved, man we have been able to go really far on it together

[@cwbintn8949]

A lot of people find going into the data / numbers more into this mechanic stuff kinda boring, (myself included), but Luke is just such a nice dude, that I will always like and share his vids for that fact alone. Dude seems to be a legit salt of the earth cool fella

[@phillipcortel6330]

Luke! Ford uses different lengths of push rods. Usually. .030,.060 longer. Fantastic video !

[@andreasfiska7066]

Lunch by the graveyard 😊 Keeping in touch with the roots. Thanks for another great video.

[@toddricketts9498]

Those old 300 in line six cylinders were one of the best motors ever

[@Sanchoskid]

I'm gonna turn 59 pretty soon. I don't know much about engine mechanical work except for the stuff I watch on KZbin..... Thunderhead 289, Junkyard Digs and Mook, Dylan McCool, Sleeperdude, and Halfass Kustoms. With all that being said, Thank You, Uncle Luke, (remember I'm turning 59)for this super Awesome content, your creation/invention and knowledge you share with your viewer.

[@pinkladybikermamma3603]

DAMN, YOU GUYS ARE AMAZING ON THIS PROTOTYPE! THANKS FOR TAKING US ALONG ON THE RESEARCH AND DEVELOPMENT OF YOUR CARB CHEATER. IT'S GOING TO BE A HOT ITEM. GREAT JOB. IT'S A BIT OVER MY HEAD BUT I WILL KEEP REVIEW THE VIDEOS UNTIL I GET IT. LOOKING FORWARD TO THE NEXT TEST ON A DIFERENT CAR/TRUCK TO SEE THE COMPARISON. AND PART 3. ONE MORE THING, WHOEVER DID THE COMPUTER TESTING PROGRAMING DID A GREAT JOB, TOO.

[@kevinbialkowski3694]

I love this. This is my mindset, and my train of thought exemplified but a smarter and more motivated person. I dont want 35 computers, but im not anti tech. Dont make it more complicated, make the most simple thing better. This carb cheater is genious and i hope you stay safe because there are alot of powerful folks that are going to hate this. I dont need sniper efi, i need my carb to be smarter. This is plain awesome and thanks for sharing

[@slick-px4pq]

I'm hoping I can buy one from you once you get to that point. Very useful and in the same vein as progression ignition, another brilliant idea.

[@ThunderHead289]

I know Ted who created progression pretty well, he's a great guy and extremely smart

[@kevinleee3408]

Thank you for leaving in the fact the battery wasnt on 😂 i do stuff like that too 😅

[@TheKeymaster316]

Really incredible that no one has come up with this in the era of small-form pcb’s. I know that this is really just the tip of the iceberg and I’m glad to be here to see it. As always, I enjoy the informational videos on these old rigs.

[@AnthonyRBlacker]

He has a video where he had some fun with his garage door control in the house he was at.. I love the small form pc stuff (arduino is amazing!) controllers for days.. not professional with it, but I really love seeing it used in the real world. My friend was lead engineer over at Crestron back in the 90s 2000s, the beginning days of home automation, before the pi came out.. Fun and you can do ANYTHING with it

[@TheKeymaster316]

@@AnthonyRBlacker I’ve enjoyed the Pi for game emulation but there is some serious fun to be had with these units with the right know-how.

[@cliffpalermo]

I have a 68 f100 3 on tree and a 240. They will run under any condition thrown at it. A pleasure to drive when tuned right. Looking forward to being able to purchase your setup one day

[@OUTTAGASGARAGE]

I cannot wait to buy a carb cheater unit when you guys make it available. This will be the perfect setup to fine tune my woodgas powered projects and bring the manual/analog woodgas air fuel mixing into the current century! Keep pushing the envelope Uncle Luke!

[@PaulThomas-qo9vy]

Great idea to use the Carb Cheater on your woodgas engine. What is the AFR range for woodgas? I've never even pondered that before. Wood gasification is fascinating to see & study but looked complicated to operate. Good luck!

[@OUTTAGASGARAGE]

​@@PaulThomas-qo9vy The ancient rule of thumb is to hit a target of 1.88 to 1 woodgas/air mixture. The old fashioned way to hit that target is to introduce air into the woodgas before the intake via small throttle body half the diameter of the total intake diameter. Using a choke cable to regulate the mixture which varies by quality and humidity of wood fuel, gasifier temperature, hopper conditions, etc etc. I would love to see how the carb cheater reacts to that with providing PWM signal to a dedicated electronic throttle body to provide sole fuel mixing without a carburetor in mind. This is already a much better system than my simple arduino/PID setup that just monitors hi-low readings of a target AFR and then adjusts a servo to move the throttle body to reach AFR goals. The user interface is a game changer! Count me in for instant purchase.

[@kevinleee3408]

That trick with the needlenose vice grips and rubber hose is brilliant

[@AntonioClaudioMichael]

Love the tech videos Mixed with the mechanical Luke nice work as always @ThunderHead289

[@jamesbarr3455]

Absolutely great. Anyone and everyone can learn from this. Ripper, Mate!

[@softenerguy]

It's nice you walked through the process of correctly identifying the resistive lead, pointing out the difference between the engine not running and then running. Great video!

[@powerwagon-wy2fo]

I really hope a few of these make it to a high school shop class. I think using these to do a unit on how the components of a carbureted engine work together would be amazing.

[@man_of_culture5558]

I have an old Datsun 280Z that I’m converting from factory EFI to a carburetor setup. I’m liking how much this would help me tune a dual carburetor setup! Subscribed and turning on notifications on this one!!

[@silvercoug]

Looking forward to this project getting out there and into the market. You guys are definitely onto something.

[@davelewandoski4292]

Good to see you back Luke!

[@JoKeR-qu3ut]

Hey thanks "Science Guy" for understanding and demonstrating how a load affects a resistive circuit and reading it with just a meter doesn't work (IOW having the load on the circuit, then measure). I tried explaining this to Derek over at VGG, and got treated like a wacko. Maybe you should send him this video......

[@ThunderHead289]

Joe is really smart - I'm pretty dangerous with circuitry, Joe is really darn good. Not much slips past he and I together. He's got me a few times like that, done a heck of a job bulletproffing our circuitry. Carb Cheater wouldn't exist without him, that's for sure.

[@hendo337]

Anytime I see something ghetto rigged, it warms the cockles of my heart, I appreciate that way more than fixing things "the right way" screw that, I like to see McGyver stuff.

[@CK-mf6du]

Very few and far between, the people like you with a wealth of knowledge. Makes me feel sane hearing about the resistance lead. Can't tell you how many times I've argued with people about removing that, lol

[@jester-gq9jq]

I love it r&d in the real world. Education fun and entertainment all in one video. You rock

[@farmerbill6855]

Sweet truck. I'll take it over any new one. Any day, every day. Six and a four speed? Those babies were fun to drive.

[@markamcampbell5795]

i put my pertronics on my 1979 ford and it is still good after 10 yrs.

[@ThunderHead289]

If you wire them as per the directions and use the specified coil, they never die. I've collectively put 180,000 miles on pertronix stuff without a single failure

[@bennyhelgeson401]

Thanks for taking us along on this journey.

[@kennethsonier1766]

Making a carbureted vehicle absolutely efficient and consistent, it's a great idea. Luke I wish you all the best with this exceptional product. I love you videos you're really informative and thorough. Keep up the good work dude 👍✌️🇺🇲

[@jayburrough4308]

That's a really nice 68. great video guys keep them coming.

[@johnnymoody2740]

Nice looking truck 👍👍

[@roberthemphill8588]

Hey Luke. Sure enjoy seeing the old truck percolating like a champ. The old 300 is/was a great engine for working trucks. Keep the videos coming. Thanks.

[@HFG]

Super cool. Your unit is going to help a ton of people.

[@ThunderHead289]

I hope so - so much of carb tuning is expirience. Carb Cheater does a really good job of bridging the gap of understanding. Most people going efi, really that's all the info they need at their disposal to succeed

[@HFG]

@@ThunderHead289 I'm pretty sure you're the only person online who has really broken down carb basics for the masses. Unfortunately I forget things super fast. You know I'm a supporter!! I've already got a carb cheater earmarked for a summer project :)

[@n1r0l]

Stay with it Luke! I am confident you will succeed with this endeavor. I have an old '84 302 that I have thought about reviving for a daily driver, but I know the 2 barrel will need attention. I would also like to get more than the 140 hp out of it. I was going to get an aftermarket carb, but maybe you have a better solution here.

[@Bender_B._Rodriguez]

if thats really an 84 I think you have a flat tappet cam and its not actually a 302

[@DanEBoyd]

@@Bender_B._Rodriguez First roller-lifter 302/5.0 was 1985.

[@tombryant1104]

@@Bender_B._Rodriguez The 302 was introduced for 1968 models, reguardless of cam it's a 302(I have one in a '69). The 5.0 moniker was first used on the '78 Mustang II, continued into the Fox Stangs. For '80-'82 there were 255 versions but 302 were produced for all years '68 thru '01.

[@JimBascombe]

I just did a lot of work on my cousin's 85 f-250 with a 300 six. My cousin is not one to do much to it except regular oil changes. So the spark plugs were the ones that were in it when he bought it new. So a full tune up. Also i put a four barrel intake, headers, new exhaust. Ect. Now it runs like new. And he is getting better fuel mileage. He is happy.

[@perotekku]

Hey Luke, just wanted to say thanks to your tinkering, you've inspired me to start working on my hall effect speedometer/odometer Arduino project again. Keep up the good work, as always!

[@joshuaphillips1867]

Valve adjustment info is dead on. Have been doing it for years. Couldn’t tell you how many thousands of valves I have adjusted NOT on TDC. Been trying to explain this to different mechanics, unreal how many people don’t understand basic engine theory. Good stuff

[@ThunderHead289]

There's so many things the internet shrouds in folklore that actually are very simple - don't get me started on pushrod length or ignition timing 😄

[@terryglance7126]

I like the "I don't know what I'm doing."meme on the foreground screen. 👌

[@gabrielf2432]

Love the Big Six, cool to see a bit of it on this channel.

[@Tinman97301]

I can't wait to get one of those on my hotrod. Man that's cool

[@chadoakes8002]

Is glad to see you making videos Again Uncle Luke It's pretty amazing what you can do with that carb cheater Is it blows my mind I could listen And learn new things from you all day long Is that's what I love about your channel Is not only a great content Is but you actually explain So even somebody would Is my abilities Is kinda understands what's going On you and Kevin Brown Are Just amazing what you guys can do Thank you once again for all your hardwork and great videos

[@jdekk7733]

This is just so good! Good to see you go further with the cheater. Man that lawnmower carb on your v8 really showed what it can do.

[@ThunderHead289]

. I just wish someone could have made the carb cheater 10 years ago when I started out - would have been a cake walk to learn carb tuning. I got here the hard way 😅

[@brandonswepston1745]

Great video👍🏻 I always learn something and found this episode helpful because I struggle to tune my 300! Thanks Luke!

[@jamesfairbairn1588]

Very impressive. Thanks for sharing

[@lawrenceengel3330]

Really cool to see the data manipulation in real time 👌

[@stashwaxroller1740]

My 76 F100 with 300 6 had an emissions rail plumbed into the head at each exhaust valve. I castrated the emissions and plugged holes with 1/2-20 set screws much like someone has done to joe's. I would guess your 300 is a 76-79 engine. As a 300 6 fan, your last two videos have been very interesting ! Thank you VERY much and keep up the good work !

[@PaulThomas-qo9vy]

Yep! Lots of us 300 Straight 6 fans out here! Paul with a '65 F100 & a 300, 3 on the tree & factory Aux. Overdrive.

[@zundfolge1432]

drooling cause I want this unit sooo bad

[@tom-ehill2713]

Thanks Luke-- I learn tons from yall!! Have a fantastic summer- C U next time.😎

[@ThunderHead289]

Thanks so much

[@Taydrum]

I really want to see you tune a windsor 302 with MC2100 carb. Nice Job by the way

[@honorrolls5415]

Great video Uncle Luke you do a great job explaining things to the average guy thanks so much Bill in Fort Wayne Indiana

[@ThunderHead289]

Thanks Bill, hope things are treating you well

[@williamyoast216]

The 300 I6 is probably the most solid running engine ever

[@JAStheACE]

Keep at it uncle Luke, I always enjoy the content and information you provide. I'm old enough to be your uncle but dun matter. I'm interested in this fancy gizmo for carbs mate. Would be awesome to have one on a few of my old vehicles. Cheers from Australia. oioioi

[@Ecosse57]

love that outro photo of the farm truck. also, more on that chevy 2 please!

[@richhaytonNZ]

Fascinating stuff, another fantastic video.

[@charlesangell_bulmtl]

Good reminder on the points era having resistance wires in ign. circuit.

[@hanknipper3921]

Great job Luke! You should send one to Kevin at Junkyard Digs

[@marktimmons6149]

Whats up thunderhead 289 other great video from y'all finsh up f100 .2:05

[@jamesmcrobert3286]

I like what you are doing here! keep it up.

[@mattshansen9814]

Great video. Glad your back.

[@kpheathen9370]

I had a 1967 mustang with a inline 6 as a teenager I ran out of oil. All I had to do was add 3 quarts of oil and was good to go. Can't beat those old Ford 6 cyl.

[@robertwells6454]

Great Truck, love the 300 6 it's a tuff engin. 😎👌

[@Enigma-Sapiens]

Thanks, Luke! These old trucks (67-72) are my favorites, I have owned a few BITD and I wish I still had one now.

[@BasedBidoof]

I love seeing the improvements to your device. I can't wait to see it on a strangers car one day

[@BMWTurbo]

Really like your choice in vehicles to work on, not Junk like so many channels. Hey, proper bolt torque is a procedure: clean and lube the threads, then pull in a single smooth pull till the torque wrench clicks. Pulling on a tight or torqued bolt is not a real torque value as friction between nut and bolt is higher than the actual torque. Also, you can change the rocker stud and nut for a Chevy style adjustment that allows you to set the lash, the "zero lash plus 1/2 turn at TDC".

[@robertclymer6948]

Hi Luke and Joe! You know by now, all the big boys out there, (Holley, Edelbrock, etc etc etc.) are taking notice on the Carb Cheater. I am sure you applied for a Patent, TM, Copyright or whatever you can get on your product. When you get to the stage to market this, I would love to preorder one. Thanks much! Cheers from Motown/Dearborn.

[@davetapani3253]

Love that carb cheater idea. Keep up the good work guys. Very interesting!

[@ThunderHead289]

It's honestly ready for release - held up my legal/government right now but we're getting there. Can't keep our hands chained forever

[@davetapani3253]

@@ThunderHead289Need one for my old Dodge. Very cool love it. Can't wait.

[@GRAMZ67]

@@ThunderHead289 I definitely want to get my hands on one of those when they are available

[@johnsarian_cu]

Best truck I ever had was a 70 150 w/300. Just breathe on the key and it started no matter how long it sat. I might've flogged mine to about 4k before shifting it I wanted to brag about speed.....LOL

[@ThunderHead289]

We would have but it's neither our our truck so we didn't want to be hard on it - we may have shaved 3 seconds off tho 😄

[@RangerFabWorks]

I love how you, kevin, and derek all kinda pick on eachother in each of your engine videos. pretty comical.

[@ThunderHead289]

Am I picking on anyone? 😅 I'm just picking on Facebook groups personally. I can be seen standing my ground hard on tech in windsor groups especially.

[@calvinlevie943]

Very good video ,keep up with making great content, your excellent, thank you

[@marksearcy9708]

Looks like a great program, can't wait to see next one.😁

[@danieljonhson6367]

My dad had a 1967 F100 long wheel base with a 300 in it that was a good truck .it would go from 0 to 60 a little quicker than what his does it was a 3 speed on the column

[@evasesh6585]

The 300 heads have 2 different style rocker studs, one is a non-adjustable pedestal style, the other is an adjustable style. The rockers from a head from 84 and newer is non-adjustable, just tighten to the torque spec, 83 and older you adjust them like any other rocker adjustment. From what I remember, the non-adjustable style have a shoulder stop. That one looks like the adjustable style.

[@firepinto]

You guys do great work! Aux relay ideas: RPM based exhaust cut outs maybe, or would it be vac based? Hmm ... variable tuned length headers Muwahahaha... all of the scavenging!

[@ThunderHead289]

Whatever someone wants to do with it, it's there with multiple setup styles 👍

[@williamwhite9767]

I started with Chevy V8s with adjustable valves back in the 60's. Then I bought a 70 Mustang new with a 302 V8 that had non-adjustable valve rockers. If I remember correctly the way to adjust the valves was to collapse the lifter, measure the gap, and use longer of shorter push rods to get the adjustment correct.

[@marcvought]

I’m sure someone has mentioned this before, but I looked through every Alice in changes song I had access to to find the song in his videos. Turns out it’s a band called skorned. The song is psychosis. And it rooocks!

[@glenharper3136]

Thanks for the video Luke.

[@dwaynegilkes3544]

Nice looking forward to this becoming available

[@lenbones7940]

an old man on my block has 2 of those both kept cherry in a pole barn he built just for those trucks lol him and his wife always drive em in holiday parades that year model always looks sharp even when there "patina " everything

[@markamcampbell5795]

i have an 88 f150 with a 302 f.i. 4x4 5 spd manual and was thinking of putting a 300 6 in it. the 302 was overheated hot enough to warp the head.

[@markshuput5228]

That pickup is damn clean for iowa weather. I know, I'm about 65 miles southwest of you.

[@ThunderHead289]

You can't hardly find any good 70s and early f series trucks anymore - dried up in the last 10 years

[@JohnChrysostom101]

Awesome stuff great mini saga

[@roaddog1973]

If they haven't already, Holley is going to come knocking with a wad of cash. Don't sell out man.

[@dvdavid888]

I could see this being used for multiple carb balancing as well

[@AntonioClaudioMichael]

Them spacers lools like it has some delrin in them

[@ajpinnataro7915]

I hope you make boats loads of money with your new invention! Good luck.

[@HRX6.4]

Could those spacers be black bi-axil glass? Hmm.. On another note glad you started up your videos again. Thunderhead you didn’t know it but you guided me through my first FE390 build!

[@hardball107]

If you have a GM with points you also have a resistive lead and an extra wire from the start solenoid on the starter to the coil. That's why people bitch about the Pertronix units which are as reliable or even more so than a HEI which is saying something. I've run both systems for over 40 years on almost everything without a problem and the biggest problems those units have is people not reading or understanding the instructions. A full 12v is a must, you can just jump the ballast resister on a Chrysler, and the second problem that bites most people in the butt is using the proper resistance coil. Some coils have a resister built in that simulates the resister wire for a point ignition and the Pertronix units require a specific resistance (ohm) primary winding in the coil depending on which model you use. You gotta pay attention and your project is a perfect example.

[@ThunderHead289]

Couldn't agree more - very rock solid comment right here

[@claztube]

@21:00 NOTE: ...as soon as the video starts look at the grip the driver has on the steering wheel. The placement of his thumbs is the best practice to commit to if you are driving around on roads that are not smooth. I drove a 45' tour coach around San Francisco and as you turn the wheel of such a heavy vehicle, if during the turn you catch a bad spot in the road, particularly a pothole, the wheel can suddenly turn quite hard and if you have your thumbs locked around the wheel, there's a good chance as the wheel jerks one way or the other with force, you will break/fracture your thumb. It happened once where I had my thumb wrapped around the wheel and yes, I was just lucky upon catching a pothole unexpectedly, the wheel violently spun in a way that caught my thumb on the cross bar of the wheel, fortunately I didn't incur said injury. For sure I paid more attention thereafter to not engage my thumbs around the wheel.

[@donkelley7624]

You got an EGO ! But I totally DIG all the Fords !!👍

[@ThunderHead289]

I do, I came from the trailer park to where I am now and worked a job the entire time because I had to - all these Hollywood everything youtubers had big support systems and lots of land beforehand. So I somewhat have a chip on my shoulder - got here the hard way.

[@koniseatskimchi5541]

best engine ford ever made.

[@ericlakota1847]

The old 300s where my favorit ford motor mechanical point as kid just easy to work and Torqueyliy little trucks for what they where I love all straight engins

[@chrislour8938]

I’m new to the carburetor game bro so i think it would benefit me tons. Wish my peers would of taught me what they know.

[@ThunderHead289]

The problem is that your peers probably think they know and they actually don't

[@chrislour8938]

@@ThunderHead289 this is accurate. Except for my granpa he pretty much built America lol