Exhaust Mod on a whole new level of dumb works surprisingly well...

[@krispieschicken]

For people thinking this affects the environment greater, it doesn't. He drilled after the catalytic converter, and before the muffler. The muffler only "muffles" the sound. Basically the exhaust is the exact same emissions level as before just louder. The only danger is potentially rust and exhaust fumes in the car.

[@juancena7636]

So it wont leak right

[@thethirdhokanye3760]

@@juancena7636 not unless you have an issue with your cats themselves, such this won’t cause.

[@asrielandcharadoesstuff4789]

He's polluting the environment inside his vehicle because now the exhaust doesn't go all the way to the tailpipe it flows up into the trunk

[@destroyer6867]

Greta was here in the comments?? Omgosh I want her autograph! 😱😮... 🌈🦄🖕

[@misery_follows]

all i got was a loud hissing noise deafening when accelerating

[@bon482]

Got the same plan here. I dont need it too loud, dont wanna waste money and time for an electric valve also. Just drill some holes until the volume is right and can go back to original with just a pipe clamp.

[@Ayeskkies]

Nothing JB weld can’t fix

[@Assassinator-jx3rh]

Then its valved lol you just have to have a drill to open and close the valves

[@Its_Ghost]

ok can we all agree we have thought of this because we dont want to spend money

[@fml861]

Yes

[@lostrelyk]

and ppl will still bash on you even though they prolly thought about it themselves 🤦🏼‍♂️

[@BK2RAWW]

@@fml861 pp

[@automattic4202]

I mean at the end of the day what’s the difference between this and straight through mufflers🤷🏻‍♂️🤷🏻‍♂️ pitch and tone that’s it…I just don’t know why everyone goes with a small bit…take a 3 inch hole saw right to the bottom of that big ass muffler lol

[@bon482]

Exactly, in my case I dont want to much welding on the pipe aldo. Drill some holes and cover them with a pipe clamp when You want to goback.

[@MrMotoMike]

3:18 There are times I'm on a job that requires eye protection and I think it's bullshit, but when people do things like this without any eye protection my gut sinks.

[@christianagustin396]

He did wear eye protection

[@MrMotoMike]

@@christianagustin396 He also did 'not'. Must have gotten something in his eye, then put those on

[@christianagustin396]

@@MrMotoMike oh that’s true

[@chrisking4411]

Really should of explained to the less Informed that the drilling needs to be made after the catalytic convertor, just before the muffler and nowhere around or before the oxygen sensor. And then explained why. You can't smell those gases before they hit the convertor and can be potentially life threatening or cause serious illness if not drilled correctly.

[@danielseeto9622]

Hey Chris, do you reckon an old 1993 hilux would have these sensors? If not, should I be doing this for my own good. Also side note will this damage the underside of my truck as the exhaust may be coming out prematurely through those holes and hitting the underside. Thanks

[@chrisking4411]

@@danielseeto9622 Honestly buddy I'm not sure of the sensor placement on a 93 hilux. Should be able to locate on google, however. As long as you have holes drilled facing the ground you should be fine and avoid underside damage. Maybe some long term rust damage if anything, which is not ideal and keep in mind doing so will most likely fail an inspection. As for doing this for your own good, its completely up to you. Reasonably safe if done right. Just make sure you check for the sensor first, drilling before it or around it will have serious repercussions regarding your MAF. MAF readings that get sent to the ECU will be completely incorrect. The ECU will compensate the increased amount of air with extra fuel and then your in trouble. As for if you should be doing this for your own good... That's purely for you to decide based on the pro's and con's. IMO - con's outweigh the pro's.

[@danielseeto9622]

@@chrisking4411 thanks for going into more detail, I appreciate that

[@vlz.matthew]

it’s really not that difficult to just drill in between the muffler and the cat lol … there’s also a resonator in between the cat is like at the top of your exhaust

[@maccabee3753]

For anyone wondering, I did this to my 1994 MJ triton since you can’t get decent aftermarket mufflers that will fit. Putting 5 3/8 inch holes, and it is LOUD. it’s not extremely obnoxious, but you’ll hear it a block away no issues, and it created a lot of back fire when you’re at higher speeds and revs, but I love it, just got to really crank the music to hear it lol.

[@RailingRutsNailingSluts]

I came for a similar comment for my 96 MJ but I didn't think I'd be so spoiled haha👌

[@RailingRutsNailingSluts]

Also, where did you drill? Asking for a mate

[@RailingRutsNailingSluts]

I was too impatient for your reply for my fully sick new mod so I just sent the cunt 5 times with a 5mm bit just before the muffler😅👌

[@RailingRutsNailingSluts]

If anyone else is considering doing it, I suggest to drill one hole at a time and go for a drive until you get the best flavour. I didn't care and just sent it as my exhaust is going to get replaced soon anyway😂

[@ryandaviiizzYT]

​@YoaminYashed yeah bro I'm going to give it a go because I am also replacing mine soon so why not

[@cmpunk6481]

Got bored, was meant to wash the car and ended up drilling holes 😂

[@beetleulbrich4778]

Literally just did that😭

[@LOREGUINNESS]

This will be me...on this summer

[@jordanw8289]

@@beetleulbrich4778 fr same I hope my mechanic won’t be mad 😭

[@justinamaral2173]

Literally same😭😭😭😭

[@misery_follows]

all i got was a loud hissing noise deafening when accelerating

[@Dreamlink91]

pro tip. take the exhaust pipe off and put few holes from the upper side on it. that way when you go to yearly check they wont be able to see it but you will have it permanently louder

[@sheldonwoodhouse4222]

Idk if your joking but im not experienced in cars and i know thats a bad idea cause drilling the bottom lets precipitation out instead of letting it sit in there

[@isatntt]

@@sheldonwoodhouse4222 if the precipitation needed to go out then the car manufacturerer would of done that

[@samsantana]

@@isatntt exactly, the heat in the pipes evaporates all that either way

[@johnsalchichon3605]

Yearly check? What kind of communist shit is that

[@Sleepymazda999]

Wut is a yearly check , mate?

[@creekhed697]

This is not dumb, it works!! After the Borla exhaust I bought for my 2005 mustang GT was too quiet, I did this mod exactly and it sounded amazing I got compliments on it all the time! Then, I also did it to my next vehicle, a j k Wrangler... And while it wasn't as good as the mustang, it still sounded very good and extremely similar to the aftermarket exhausts I heard for the Wrangler. Now, I recently did it 2 mi 2015 Mazda CX-5, and again the results have been excellent. If I had the bread to buy inexpensive cat back I would certainly do so, but on a tight budget this works really well and does not affect power or fuel efficiency, at least not that I have noticed in my pretty extensive research lol. I started off with drilling one small hole literally just before the muffler flange, then I drilled that one out larger, to about 1/8 inch I think. The mustang was dual exhaust, so I did this on both sidesmustang was dual exhaust, so I did this on bowl sides, and ended up with about 5 holes on each side LOL. For the Jeep and Mazda, I only drilled out a couple holes. If you do this be aware, you can always make it louder, but each hole increases the sound, and you can't undrill lol (although u could plug it). People can say what they want, but everyone loved the sound of the Mustang, especially after I added intake and a tuner. Once I added those mods, the thing ripped big time! It was basically a very loud version of the Borla. On the other two cars, just having couple smaller holes did the job, making them sound aggressive, but on the milder side. Right now my CX-5 is not as loud as say the loudest corksport available for the CX5.

[@patrikrusinko]

How many years have you been using this upgrade? Has it not damaged anything? The holes kinda change the way the exhausts rotate inside the exhaust pipe. Has the car started to backfire? I need to know this :P

[@Lazysmackz]

@@patrikrusinko my bmw has 2 pipes and each one has 8holes and theres no popping. Just gave my car a nice exhaust it's nothing that will get u pulled over cuz it's not as loud a muffler delete

[@No1.Gleeko]

VERY HELPFUL 💯

[@isaiahprays]

What are the bowls on the mustang I wanna do mine

[@Tang5oh]

Why r people saying its an exhaust leak or blown exhaust? Im somewhat concerned if i should do this to my catbacks on my stang or not. I really want to make it louder cause right now its just medium loud. Doing this would be nice to cause its free and i dont need to spend money. How would thjs cause exhaust leakage??? Like how is this in any way different then a muffler delete??? of course there would be leakage here and there but its not excessive. Plus u can drill more and larger holes with larger sizes and its practically the exact same and your muffler and tips are just there for aesthetics

[@Grand_PrixGTP]

Maybe use a bigger drill bit for better results, your BMW now sounds like a modified vacuum cleaner lol

[@mototve7440]

True 🤣

[@vlz.matthew]

it depends on how big the muffler is … for example on my Nissan I drilled like 18 holes but the muffler is huge and goes horizontally (unlike most) so it’s loud but it just sounds weird and not good

[@savannachumley2023]

I did this on my car untill my muffler delete kit come in, sounds good but there is a slight fluttering noise. Would drilling a few more hole resolve this so there is more space fro the exaust gasses to escape? I only drilled 4 holes on each pipe, mine is duel exaust, so 8 holes total about 3/8 in diameter

[@nicksanzi8820]

TALK ENGLISH

[@TransformingTogetherIA]

They say drill at least 6 holes

[@joshualegler2233]

Grammer police here but he ain't talking jackass. Gtfo

[@andymoore1813]

What size hole did you make?

[@patrickfields3392]

andy moore 6.5 mm

[@yeanah2571]

I've seen others use 3/8s. Bigger holes means less drilling

[@treclive]

I love them hot metal shards on my face when I'm drilling up like that

[@mandol230]

The b3st partt

[@mrb973]

Can you tell me if this will damage underneath the car at all thinking of giving it a go

[@masonpugh3637]

Hey I think this is worth a shot I'm going to straight pipe it anyways and if I don't like it I can always just feel it back up

[@damondknight9191]

Are you in the U.S. because straight pipe is illegal in every state...

[@masonpugh3637]

@@damondknight9191 yes but we e ck during oueen Obama

[@sluggychimp4443]

@@damondknight9191 doesnt stop people LOL

[@christopherramirez8734]

This was probably the. best yt tutorial ever we have the same car and everything ty!!!! and nice car.

[@Dreamstreet2]

Any affects for fuel economy? Because I want to drill in mine too.

[@pepeiann]

Nope

[@mcpang9983]

Just buy one

[@richardmcgree556]

An exhaust mod wild only change the fuel economy if there is different amounts back pressure being pushed into the exhaust, holes in an exhaust will hardly change it at all

[@esen9685]

Here at the genius convention we use mini charcoal BBQs as mufflers and if you want louder exhaust just open the vents 🧠

[@jerow7204]

Rust works just as well if you have an older vehicle.

[@MaliVinnyB]

VERY True, LOL!!

[@sumblwnup8695]

Natural exhaust mod

[@mattjohnson513]

Third GEN Dodge Ram 1500 they like to return to the earth from once they came

[@trexnoises4071]

Did this to my stock 2015 5.0 f150 right before muffler with 3/8 bit. Did about 4 holes. Sounds sick af

[@winxter5018]

Im gonna do it to my f150 too

[@trexnoises4071]

@@winxter5018 do it, you'll love it. Just make sure to do it before the exaughst manifold, after the resonator

[@winxter5018]

@@trexnoises4071 alright

[@HailSatann]

So question! My altima has duel pipes. Would holes be drilled where the pipe is straight and splitting into dual pipes ( straight pipe, splits to duel pipes, muffler then the exhaust tips)? OR on both pipes of the dual on driver and passenger side pipes right before each pipes muffler?

[@jeremypeeters5322]

Spiral0ut I would recommend right before each pipes muffler, gives the exhaust more length and giving it a better sound i find

[@HailSatann]

@@jeremypeeters5322 thanks Jeremy appreciate it brother

[@alexg8460]

Hows the exhaust holding up? No rust or problems that it caused? About to do this on my 528i , i have the money to buy one but i just want it little louder its not ferrari so not looking for performance. I will try today and up date see what happened !

[@Batatus12]

So what happened

[@Shotbymass]

@@Batatus12 one year later... the guy died while drilling the holes🤣🤣💀

[@colebennett6659]

@@Shotbymass rest in peace Alex G

[@jpk3582]

Rest well bro

[@mrepic.0079]

Rest well brother 🙏🙏

[@truet608]

“we’re gonna be working on Lachlan’s beautiful bmw 330i, doesn’t have a single problem” *coughs* 😭😭

[@tysonrickks1]

Drilled holes in my 328i. Same spot. , made 7 holes , sounds pretty good , even though im getting a muffler delete

[@evanreid1247]

Sgt. Tyson I’m thinking of doing this. Is there any exaust fumes or droning from this

[@marcelenduro3009]

hey Sgt. did you notice any drone while doing long trips?

[@allanb4680]

Would it pass inspection? And if not is there any other way to make it loud?

[@RegiosRed107]

No it wouldn’t In some states and in some it would so it’s basically an exhaust leak so you just got to check for your state I had the same problem and it didn’t pass inspection so I had to replace the pipe in that spot but I just ended up getting a new muffler so ya I live in Texas so no it doesn’t pass here sadly but this is a super cool little project

[@allanb4680]

Ryan Malone thanks man for letting me know

[@jcarlos11bquilla01]

@@RegiosRed107 just put bolt screws the day for the inspection bro to pass

[@Hisham23633]

Cant do this in canada cause you can see exhaust fumes coming out from underneath the car in the cold winter :/

[@chasingfpv2558]

Icarus that’s why you do it on your butter fly valve side. So that way when your car is at idle it won’t do it or no back pressure will flow all the time.

[@KyleDisney]

Motor sounds rough at start dude.. might wanna check on that

[@LachysGarage]

yeah just replaced the starter a few days ago :) Video will be out in a few days

[@I_hunt_lolis]

Even better when rust does it for you

[@eathanstraker2691]

Or you can find where the exhaust is connected to the catalytic converter tube, then put a long enough bolt and nut in the middle leaving a wide gap between both joints and that is reversable, rather than filling the holes of ever needed

[@eathanstraker2691]

@TRY NOT TO LAUGH ahh I see!

[@eathanstraker2691]

@TRY NOT TO LAUGH 👌 which ever is reversible and equates to having fun and getting away with it lol 😆

[@TakeThis_L]

Yeah but then you’ll have exhaust fumes leaking into your car lol.

[@Raydoesitintime]

@@TakeThis_L some of us already have exhaust fumes running through their cars😂

[@vlz.matthew]

That’s terrible and releases toxic fumes man hell no

[@scamfather2663]

pretty much did the same shit, I cut it halfway with a sawzall and then stopped cuz I hadda do some shit and then decided to strt the car and the shit sounded actually good. so i left it Lol

[@ryanxi6960]

Does it still sound good and are there fumes in the car?

[@madmattg8956]

For a size 3/8 do you recommend 4, 5 or 6 holes

[@maccabee3753]

I did 5 holes and that was more than loud enough for my pick up, 3 or 4 would’ve probably been better in my case if you’re not wanting to be completely obnoxious. Not sure how drastically it’ll change with different cars and pipe sizes.

[@clixt984]

Any droning when cruising?

[@shafialzaman4258]

will this pass smog test in cali? i wanna do this to my 328i

[@saidlozza2792]

Yes it will pass the smog but not the inspection it’s not worth doing it

[@sirbader1]

@@saidlozza2792 They dont even jack up the car anymore for inspection. They'd never see it.

[@paulhotson5820]

@@sirbader1 Mine went on lift.

[@joecapuano7402]

I did this on my 1.8t jetta gli and it was amazing

[@samnorwood.]

How’s it working a month later? Thinking of doing this to my Jetta

[@joecapuano7402]

Sam Norwood great just a check engine light that comes on every so often because I bypassed the catalytic converters

[@paytonallen928]

Same story as sam hows it doing after 10 months

[@LSxHC]

@@joecapuano7402 if its check engine light isnt on its a fake VolksWagen

[@thedrunkgeek6824]

But dont you have to repair this so it can pass MOT?

[@benschillchannel8335]

No MOT in Australia

[@avesguru]

Use clamp before mot

[@Shadow0fd3ath24]

what mot? they dont live in a communist country

[@jakubleschtina7734]

@@Shadow0fd3ath24 you idiot

[@evs251]

@@Shadow0fd3ath24 Mot is for keeping the roads safe so no pieces of shit cars endanger others. Thus the speedlimits can be a lot higher than in australia

[@patrickcarr8942]

Will it still pass emissions?

[@patrickcarr8942]

Did sounds good!

[@medupbruh29]

It would its the same as a muffler delete only thing that it does is stop the flow from hitting the muffler which is to literally muffle the sound

[@destroyer6867]

It will pass emissions

[@joelcotnoir9611]

I have 2 audi the v8 and the 2.0lt with hole and it doesnt work on the 2.0l turbo. On the turbo car im curious to know if i lost power...bit the sound didnt change at alll. On the v8 the sound was already great and drilled one small hole in each pipe and i dis saw à 5 to 10% increase...not enough haha but i only have one point left on m'y licence for 2 year so im looking for à balance and it work...

[@beardarazs9522]

So one that can go through wood, Metal or PVC doesn't work? Will on e that can go through Steel beams work?

[@coleosmond4185]

Any drill bit will work just fine

[@beardarazs9522]

@@coleosmond4185 Not just any drill bit will work I have one meant for wood and PVC and metal and the drill was zig zag all over the place you can see that it wasn't until I bought a bit with a steel beam picture that it stayed out took for ever but went through.

[@ItsCalebThomas]

Haha guy in the back eating cereal

[@michaelrobillard8012]

Did you get a check engine light after doing this mod?

[@oscardecolle9422]

Michael Robillard nah i did it on mine and no engine light comes on

[@goffdroid]

Cel if it's before any sensors usually

[@M4FIA-g5l]

It’s before the sensor, you’ll be fine.

[@Ruebz_f30]

The way that thing started, I’m guessing he already had a cel

[@brickisnoob6613]

Did it take a little bit to drill through it ?

[@logandooley4894]

Should I try it on my 01 Camry

[@tessbaker9320]

Two holes in my car just a few inches before muffler and it’s now kinda sluggish when accelerating.

[@Kuttem76566]

😭how big was the holes you decreased in power

[@destroyer6867]

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@AlyssaBonilla2022]

@@Kuttem76566😂😂😂😂nowauyyy

[@khaledjordan9046]

can I do it on my impreza not writing ? will it work ?

[@Monique.1999]

ofc it will

[@Feindflieger1]

You got to drill some holes in the Cylinder. One hole per Cylinder gains +30hp. The more holes the more oxy to bang the more power. 20-25 holes per Cylinder is a good ratio.

[@cuzzzz1325]

What a stupid joke lol

[@joeysellhausen3284]

I did this to my 2006 gmc seirra after watching this and it sounds great I used a ⅝ bit and I wanted it bigger so I hooked it out with a step bit and now it sounds awsome

[@maffia6269]

Why it starts like this?

[@cashmoney4408]

so i gotta 1.8 sentra, trying to see what to do with my exhaust and i’m trying to keep a ricey theme lol. think this might be it

[@beardarazs9522]

So @RexH what was that thing you guys mentioned about installing something to turn it off and on called?

[@gavinlee9478]

Cutouts

[@azion6518]

@@gavinlee9478 he’s going to put a side valve so if he opens the valve all the sound will leak out that hole instead of tunneling through the muffler and if you grow out of having an annoying sounding car you close the valve and no sweat now u have a muffler

[@gavinlee9478]

@@azion6518 did you mean to reply to me, I know what they are and what they do but thank you for explaining

[@medupbruh29]

It basically connects right before the exhaust and has a Bluetooth fob that opens and closes an extra hole its essentially the same thing but it acts as a full muffler delete than when you close the hole it pushes all the airflow through the muffler

[@stunnatv9250]

Is it safe to do on f10 550i ?

[@TikTamang-ty4cm]

Can I do this to my 2016 Mustang Eco boost

[@ftcballa]

So I just bondo/ jb weld the holes for inspections?! I’m so tempted

[@MyRcGoSlow]

Just staple it with exhaust tape

[@49ways]

Hahaha I was bored and just did this on my 325i.. 😂 nice

[@RexH]

hahahahahahah how does it sound??

[@49ways]

Rex H.. Nice low rumble at idle.. Nothing ground shaking.. But noticeably better than before the holes.. 😂 😂 I dig it..

[@andymoore1813]

Four Nine bloodline I'm gonna do it my 325i to lol that's why I'm here

[@krystianreyes6469]

Do you find it drones?

[@godisoncod475]

Is this legit , I’m literally thinking of doing it rn on my Ford Focus , I just don’t want anything Messi g up

[@kon2210]

I want to do that to my golf 4 is there any chance that I would get smoke or smells inside my car like back seats or front?

[@Joe-k8x]

Just do it after the catalytic converter then no smells

[@ginogonzales6307]

Is that a Walmart drill?

[@michalissozab7629]

I usually muffler delete my card ,sounds way better ,but drilling holes works too

[@alexanderunknown8605]

could be illegal.

[@vlz.matthew]

your “card” ???

[@Gabasto]

i cut a big square hole in the pipe using a angle grinder and it made no difference to sound

[@austinumstattd8373]

I don't know anything about how cars work so if I say something stupid i'm sorry. wouldn't this create an exhaust leak and if it doesn't are there any other problems that can occur from this

[@patrikrusinko]

The holes are literally an exhaust leak, but the other question is more important.

[@chickenjoe9832]

carbon dioxide can possibly leak in the car if your stationary for too long and can possibly hurt your engine

[@samsantana]

@@chickenjoe9832 it won't do anything to engine, environment or anyone. The only drawback is that as you mentioned, being stationary the funds will be released under the vehicle rather than behind it, so there's a small chance it could mean into the cabin, but that's not enough to do any real damage to your lungs unless you sit there for hours.

[@blendselimi1271]

@@samsantana so if i sit there for hours is it bad for me?

[@samsantana]

@@blendselimi1271 Give it a go brother ;)

[@GRUDGEPERFORMANCE]

Haha I do this to my paddock bashers :)

[@adg_games6655]

Yes.

[@DomFalco]

you can also drag some empty cans under the car to make it louder.

[@Just_Joshing024]

Now I want to just unbolt one of my mufflers, for science you know.

[@destroyer6867]

Unbolt.. more like angle grinder cutting it you mean

[@xhamilton91x]

Try drilling holes before the cat and see if you can't add a pressure relief valve tube setup safely 😂

[@mikenolan8807]

Any engine lights or codes thrown?

[@Darksolar7]

Nope not for resonator or muffler thats with catalytic converters removed

[@tvcent4651]

How to create exhaust leaks 101

[@jhinglumaghan6036]

Wont get water in the hole?

[@driftcrew4420]

If the car is running the water wont get into it because the compressed air in the exhaust gonna repel the water

[@tojotajahtaaja7896]

Im doing a really wreird way to get more sound i removed the connwction to the black muffler and putting a pipe.there with holes

[@ashtonfrett2536]

Well done guys. Well Done 👍

[@elonmusk2.031]

Would that work on a AU

[@gerardkearns4376]

Would doing this to a polo make it fail the NCT in Ireland?

[@Uwolz]

Does anyone know if you can do this in Texas and pass the state inspection?

[@jimmystepps2202]

Was wondering the same thing lmao I’m in Connecticut I think no one would but I’ve never been yet I am soon…

[@InstinctsFN]

@@jimmystepps2202 did u pass

[@jimmystepps2202]

@@InstinctsFN bro fuck the holes i mean it’s a change but i deleted my res and my mufflers this would change the emissions on the car the only one that really will is your cat converter

[@jimmystepps2202]

@@InstinctsFN i passed with a muffler and res delete so might as well delete then hole

[@destroyer6867]

Of course it will pass

[@lordeross4870]

I wish people would take my sarcasm that well 🤣

[@BillBrooks-i2v]

You should have drilled the holes directly on the bend right before the muffler

[@StRaphael-we9qn]

Hey there, where are yr Jack stands????

[@StRaphael-we9qn]

Wait for the warning lights to come on the dash... Drilling holes is so illegal in SA Australia

[@vishalt6066]

Your car sounds way nicer now, I wanna do it too but I’m scared the exhaust gases will get into the interior. Anyone know the safest place to drill holes in the exhaust system for a louder sound?

[@callum7018]

As long as you don’t drill before the cat converter you’ll be sound

[@Matthew-mt2fc]

If your worried about fumes, do it about where they did; right before the muffler

[@misery_follows]

all i got was a loud hissing noise deafening when accelerating

[@peterh7664]

May as well, I’m getting my car straight piped after corona 🤷🏼‍♂️

[@ryansmith2814]

Corona gonna be 6 more months or so just do it now

[@420BLUNTLEY]

There is no, after corona. The new world order is here

[@M4FIA-g5l]

Bro me too, just gonna try this for the meantime. No one can see the underbelly anyway. And I get the sound I want until I change the full exhaust system in a few months

[@jerow7204]

When is after?

[@tysonazure6168]

Corona isn’t going to just up and leave

[@lebojohn920]

How come mine started leaking from the holes ?😭

[@noliberalismeveragain]

You can loosen the bolts and put in some washers but in my case it came out to 10 miles per gallon😂😂😂

[@MatthewTeller-st4it]

How do you pass inspection

[@destroyer6867]

It passes inspection here in europe without any trouble

[@midcraze3466]

The fluke may be to add extra back pressure for more torque.

[@Shadow0fd3ath24]

Backpressure doesn't increase torque

[@futt-bucker]

It closes at idle to quite the exhaust

[@qwertyuiopasdfghjkl2556]

you actually wanna get rid of the muffler to get more hp, back pressure is only needed on a 2takt engine

[@medupbruh29]

It doesn’t really cause more back pressure your hp really stays almost the same if imma be honest

[@dylanchaves5974]

This is cool, but let’s say we wanna patch it up, how do we go about that?

[@misery_follows]

pipe clamp jb weld

[@mariorivas9954]

Can I do this on my Acura TL stock exhaust ?

[@nebadapeba2712]

No you might break the muffler bearings you have to be very careful

[@Anthony-lm2tq]

Did u do it? I have one too

[@champagne8587]

If you’re from uk I don’t recommend it as when you’ve to do the mot they may fail it cuz of that. And you’ll end spending money to replace it .

[@destroyer6867]

Nah, it will pass. Also you can use a clamp to close it

[@gerlandkent6377]

[SOUNDS, GREAT]👍

[@RexH]

Camry Vids coming soon!!

[@need4spe3dBeast]

😂😂

[@KamilKamil-xp8jv]

Did you try to drill holes in the silencer ?

[@danielseeto9622]

Does this work, in the video they drill just infront of the muffler but I’m wondering if you could drill into the muffler itself

[@danielseeto9622]

Have you tried this?

[@destroyer6867]

Terrible idea. Drilling the pipe could be closed later with a clamp. The muffler on the other hand would have to be welded

[@4DSCdude]

did anyone die from exhaust fumes leaking back up into the vehicle?

[@johnnobravo1978]

Before : 2:58 After: 3:58

[@bestbomb17]

Perfect, can jump back n forth easily lol

[@misery_follows]

did this to my vw tiguan 2014 but i drilled the pipe before the muffler, and it left the fart can sound on revs but when you drive the car, it sounds like a super loud hissing sound that’s deafening lmao, i’m not happy and basically should’ve just not done anything. anyone who sees this don’t do this on a vw tiguan

[@postalpancho]

Wow, an exhaust leak is now a mod. Lol

[@dylanswhack]

Got a 328 myself and did this, is there any chance of getting carbon poising with this?

[@ricardo5533]

Anything happend ?

[@osteso4s186]

I did it on my dads car it’s relly loud now hes mad

[@osteso4s186]

Its Been 2 monts now and my dad fixed it at The mechanic he was real mad

[@destroyer6867]

Lol

[@moey6942]

Dude that sounds like an M3 😂

[@fdyjt]

so if you would buy an full echaust and your not happy with the sound you would drill holes into it?????

[@skrimper]

Of course, you just spent good money on something you're not happy with. Isnt the obvious response to fix/change/make it to your liking/expectations?

[@fdyjt]

@@skrimper fix change yes but drilling wholes in new exhaust nah sorry for me thats stupid.

[@hiw1cme2chilis]

im gonna do this to my ford Flex! i had a minivan before i wish I'd tried it then

[@alanmichael7387]

Haha how did it turn out? My mom owns a Ford Flex I might do it? Good Idea😂??

[@hiw1cme2chilis]

@@alanmichael7387 I did a little bit but I haven’t finished yet! It sounds good so far but I need to be cautious as to not drill to many so exhaust fumes leak into the cabin

[@joebonga3885]

Thinking of doing this to my rental Camaro I got for a few days more fuck it

[@tysonazure6168]

I drilled 5 holes in my scat it sounds the same😂

[@iamaidanreed7910]

You drilled holes is the cat?

[@tysonazure6168]

Iamaidanreed scat pack look it up lmao

[@nicholas3753]

@@tysonazure6168 ain’t no way you did it to that car bro

[@wokcentral1]

@@nicholas3753 thats what im saying bro h only do this typa shit to beater cars not a mfkin scat pack

[@skrimper]

@@tysonazure6168 holy crap, what a terrible name for a car 😭😂 thought it was slang or something. Scat pack. 💩📦 😂😂😭

[@codybuchanan785]

Oooorrrrrrr just do what I did just get a whole new exhaust system with a Spec D muffler and remove the silencer lol it'll sound better and guarantee my car is louder than what you guys did by drilling holes

[@nothere3969]

To expensive, I'll get my drill

[@johanotero1873]

Not everyone has the money to do that

[@user-ig3vf9mw7p]

gdamn fresh baby face rexy

[@huanzeus9917]

This can also increase hp and help your car breathe a bit better. As long as your Cats good this won’t cause problems.