Looking at some access card or RFID card cloners, to see which one is best, the two that we are comparing is the simplest tool to use not including the other two that have many more functions
Пікірлер: 81
@greaser56913 жыл бұрын
"You really can get through by pushing a lot of buttons!" Oh bugger... you've found my secret to a 25+ year career in the IT industry... Don't tell anybody :)
@younesmohssen81582 жыл бұрын
Ayyyyyyyy fellow red teamer and pentester
@bakedmuffinman872 жыл бұрын
the ones that are failing is because you are trying to write 13MHz codes to 125kHz cards. you can only write 13MHz to other 13MHz and 125KHz to other 125KHz FYI.
@jayflores3947Ай бұрын
Thanks
@RolandsKenins2 жыл бұрын
Well, you tried to clone 13.56MHz RFID tag and write to a 125KHz RFID tag and failed. No surprise. Still, appreciate the effort, because I am about acquire one of these on Amazon. Thanks!
@iWhacko2 жыл бұрын
I think in the detection mode, after you scanned the card, hold it against the lock, to detect any keys if it uses those. It will try to emulate the card I think.
@fu1r42 жыл бұрын
It would have been nice if you wrote the models you were using in the description :(
@PierrePavard2 жыл бұрын
when you read the notice between Chinese and English, you see "Language: Switch Chinese and English" .. if you compare the two notices, it's easy to find where the language menu is ... once on the menu you see directly written "English" 😅
@iWhacko2 жыл бұрын
Finally found a review on these. I have the first one you have on the desk too. Was really curious how the other performs.
@tommythuyen40633 жыл бұрын
11:28 On the left device, you can turn off the voice or raise its volume up / down by pressing navigation keys up / down.
@DayV914 Жыл бұрын
You actually cannot chance the volume at all. I own the same card reader.
@Maryan865 Жыл бұрын
Hello, I also have this copier, I have Macabook, is there any program for MacBook? I beg you
@ivantrancon99652 жыл бұрын
Press Edit and you will be able to edit the card number to whatever number you want, then read the card you want to duplicate and then write
@kelleynoiseux18882 жыл бұрын
Awesome
@silasrael52 жыл бұрын
Why type a number then read? 🤔 it will just overwrite the last thing you type.
@DeadlyVenomKing3 жыл бұрын
Links please for purchase please
@user-sz7fo1jm1w Жыл бұрын
Needed a reader in a pinch
@mysoundiicon84732 жыл бұрын
i have the one thats like the first device. To get the program from the device just connect it using the usb and install it. Then it will show up as a usb-device(memorystick) you can also change the language on the computer program to english. On the down right left side of the program there are 4 button. if i rember right it's the button most to the right button. i tryd the program ones. but it's was strange i tells me it's installing freezes and get stuck. then i ran it again and the program just starts up but looks like nothing been installted and it's from china so i feel like i made a mistake here. The disturbing part is the device is from china but windows just recognized it with no problem whatsoever. Is there a spyware or virus in this program? do some one know? or root kit? my device did not talk but beept. i cut the cord on the speaker. btw To use the computer program with the device have batterys in the device then connect it and turn the device on and klick on the ok butten when the msg in screen is showing. if that's not working turn it off and on.
@Smile-zu9bg3 жыл бұрын
Which one do you recommend ?
@julianzalewski149 Жыл бұрын
If I’m cloning a NFC TAG for a coffee Automat with money on it, will i have the same amount of money on the cloned TAG? 🤔
@binzulost53694 ай бұрын
Depends on how you have to charge the card if its linked to an account probably not, if you have to charge it using a machine where you have to hold the card to a sensor, probably. Great idea tho
@letsgetto1millwithoutvids2 жыл бұрын
I want a portable one that can decode and copy all of them even if it requires Bluetooth and a phone and even if it's a little pricey around $100-$200 and one that is somewhat easier to use that auto detects frequency
@binzulost53694 ай бұрын
Flipper Zero
@letsgetto1millwithoutvids4 ай бұрын
@@binzulost5369I have a flipper zero it can do the most common ones but can't do all of them with some that it can do it can only emulate and not copy
@wollinger2 жыл бұрын
So... which is better
@pinkmagikarp10502 жыл бұрын
What’s the name of the first one?
@adamdossa53242 жыл бұрын
Do you know where I can get the software for the icopy device?
@ukasz8093 Жыл бұрын
Why can the same number be written differently in hex? In how many ways can you write the first two zeros?
@101RealTalker2 жыл бұрын
I want to use this to access the pool at the hotel down the street from me, so I can by-pass the elevator and pool entrance, but don't have a room key, how can such a fantasy be fullfilled? lol..is there an average frequency I should know about, or??
@Diehard40772 жыл бұрын
It's not the freq it's the code on the freq
@chichung22432 жыл бұрын
How are you Dr Lock I have the first big reader that you have. I read my key. it came out "HID Card Reading Success!Replace the 5577/'s card to be copied" which keyfob should I buy to clone my key. thanks for your help
@ginopillo73662 жыл бұрын
Excellent review and I am the owner of four electric locks with three RFID TAG at 13.56 MHz, I would like to use the same RFID tags to turn on and off the electricity through an RFID card reader (used in hotel rooms) always at 13.56 MHz? In your opinion, can the RFID tags be read by both devices?
@DrLockShop2 жыл бұрын
Sorry I have not tested it on hotel cards, maybe ?
@954822497026 күн бұрын
26 bit?
@papalarnythemagicman8339 Жыл бұрын
Good afternoon, we are landlords and have pre pay electric meters at our properties. We use RFID electric cards to top up the meters. Our supplier has put up his prices again for re-charging the cards. Would the this be-able to copy a full card, and reload our empty cards please.
@DrLockShop Жыл бұрын
no
@tozne_ Жыл бұрын
so is the device on the left a no go? given it the device itself gave ur laptop a virus upon connecting. how did u come about that?
@mal13able3 жыл бұрын
a?re those able to program transponder keys from a vehicle? how much are they if they do ? cherers Mal in BC
@DrLockShop3 жыл бұрын
no just some cards
@seancox954 Жыл бұрын
Hello Dr, i am looking to buy a device which will allow me to add credits on a card which i use at my tennis club to dispense balls, i know that an rfid device is used for adding credits to the card, thanks
@rosevalentine30822 жыл бұрын
Is it possible to remove/mute sound? It’s so loud
@iWhacko2 жыл бұрын
I think you can only format NTAG cards.
@kelvincalbay71912 жыл бұрын
Can u duplicate HID access card with this machine?
@vk3fbab2 жыл бұрын
HID prox yes. HID iClass probably not.
@baddadandem11 Жыл бұрын
Will this work for apartment rfid stickers for the gates?
@darianleduc5 ай бұрын
Would not be using wifi password. It definitely will send your wifi password to mother ship.
@arifazami80212 жыл бұрын
Hi which one can duplicate UHF FP4 access card?
@mochenmat3 жыл бұрын
Please go into the cracking of the other icopy device if you can please
@Foggyfighter2 жыл бұрын
All of that is 125k, isnt it?
@marinakhan8962 Жыл бұрын
From where to get card No???
@hunglien19992 жыл бұрын
Hi there, Do you know if this cloner work with keri k1881 fob or tag ?
@hack-talk9098 Жыл бұрын
How do you erase data from card
@car24dude2 жыл бұрын
In Chinese at 8:57 it’s telling you writing failed.
@samlee33322 жыл бұрын
so do the hidden micro sd card slot works?
@vishaalpatel90612 жыл бұрын
Hi Dr Lock. I am in Brisbane and need my Mifare Ultralight EV1 card key copied for my own apartment. Do you know anyone who has the IcopyX which can copy this type of card? Many thanks.
@DrLockShop2 жыл бұрын
no sorry
@DeadlyVenomKing3 жыл бұрын
Some tags are Duds
@VENUEATHENS3 жыл бұрын
from what distance can these readers read or copy a signal?
@syncrowave98152 жыл бұрын
…
@kennym29772 жыл бұрын
About 2cm. These are not long range devices. They are intended to be used in direct contact with the card/fob.
@giostechnologygiovannyv.ri48910 ай бұрын
16:26 buddy it says literally please change into a copy card XD I think you have to go to that option and then write XD
@equanimousawareness3 жыл бұрын
Stay safe. Watch for falling 🌳s and monsters under the 🛌.
@MatzeNCG2 жыл бұрын
Hi are you able to share the PC software for the first rfid Reader in the Video(with the blue label) I lost my software
@DrLockShop2 жыл бұрын
No sorry I dont have it
@jamesfredrick92562 жыл бұрын
no one is better ✌️👆than this dwag he help me with the otp by pass method and work me through all process
@mahmoudbentiu91163 жыл бұрын
Hi, I've the first handheld device you used. But I think I have a clone of it. The software that came with it is really limited compared what I've seen with the other ones online. Could you share you software in hopes it works with my version?
@mahmoudbentiu91163 жыл бұрын
I think the software of the 2nd one and the 1st one should work interchangable
@silasrael52 жыл бұрын
Could you share the software
@letsgetto1millwithoutvids2 жыл бұрын
The voice is annoying I'd just cut the cable to the speaker
@DeadlyVenomKing3 жыл бұрын
There's way too many knockoffs I saw many brands of those 2 types your using
@DrLockShop3 жыл бұрын
I know, when you order you never know what you are getting , some tags you have to swipe twice or long swipe to use.. cheap china
@9rpg9 Жыл бұрын
8:03 😂😂😂
@stoketrack5 ай бұрын
A review from a guy who knows absolutely nothing about anything ..total rubbish
@markotb3 жыл бұрын
lol Doc, you really dont quite know what your doing. Good vid tho