Rialta Cabin Door Lock Installation

The Replacement of the Original TriMark Cabin door lock with the TriMark 33680-01-K. The new part is not an exact fit. The kit comes with outer door lock, inner door lock and new latch.
In the video I mention that it may be necessary to add a dead bolt plate since the dead bolt is not quite long enough. It turns out that it is just long enough once the lock is set right and depending on how your door is adjusted. It should be noted that the electric door lock is no longer supported with the replacement lock. I also used a cover plate from just inside the door frame to cover the hole left by the new lock. I got a nice looking white metal cover from Home Depot to replace the one I used for installing the lock. The metal is nice for hanging a magnetic flashlight just inside the door.
The video was made holding a cell phone, so I apologize for the video quality, but at least you can see what you are up against.
The TriMark 33680-01-K door lock can be purchased directly from TriMark. Their contact information can be found at the link below. My cost delivered was $260.
www.trimarkcorp...

[@braddowns17]

You don't need to add a plate for the dead bolt. You just need to adjust the latch as far over as possible to the striker and then adjust the door at the hinges to move over towards the striker.

[@sallatina8835]

You could have easily fixed the original door handle by punching out the pins that it pivots on. Purchase a reamer and 2 roll pins to reinstall. Less work than what you had to do.

[@johndillman6763]

Sure would like to see how your way is done

[@cruzmontanez9712]

Hi, where did you buy the new lock?

[@willardwinn4111]

Do you still have the old latch. I'd be interested in having it.