Ridgid 918 roll grooving basics

[@Avalonanon]

thank you for the video also feel like you should wear gloves when you holding that pipe back bruv

[@fitter5423]

I know this may be for instructional purposes but never grind galvanized pipe because of the chemicals in the galvanized coating are very hazardous when breathed in. Also always put your bolts other in the same direction. And victaulic also says to put grease on the shell of the coupling not on the gasket.

[@sangamfireprotectionsystem1225]

Sir Good Evening, What is the price of this Machine, we needs Grooved Fittings on the pipe.

[@conqwiztadore2213]

What's the issue when the groover flares the crap out of your pipe? Is it improper leveling of the Pipe?

[@bruneprune]

Not sure what you mean. We have never had an issue with it. This is all sched 40 pipe. Maybe your used to looking at sched 10 or 20?

[@fitter5423]

Are you using the rigid 916 roll groover with the big lever? That’s the only groover I’ve ever seen that will flare pipe like a tuba. The reason I’m told from a rigid rep is the pipe flares like that when pressing the lever down to fast while grooving the pipe.

[@jacknasty6940]

Try slowing down

[@rtz549]

Too fast bells the end: kzbin.info/www/bejne/fqq7loGVp9d7oK8

[@ronnieettienne6335]

Combination of speed, pressure and flushness of the cut pipe.

[@amgadbotros9318]

Hi dear The tunnel oven How much price For 20 Mt.

[@PrasannAmbavkar]

@michael G How can get this machine.....

[@djfuzz02]

I am doing 8inch sch40 and it just pushes the pipe out and cant get a solid groove.

[@bruneprune]

It takes a bit of practice to hold it in and keep from falling out. I try to lower the non groove end and pull the pipe towards me.

[@conqwiztadore2213]

Would you consider 2 lines deep as acceptable?

[@SquatSage220]

My journeyman always taught me 1.5 is his tolerance. Anything more and it can leak

[@배관중자재]

정보 감사합니다 구독합니다

[@ciocithebest]

Good basic info

[@AzanMalik-j8x]

Hy Me wark fire 10 years in Saudi Arabia 30 inch grooveing

[@revertedakhi]

Speaking of basic, at least put your gloves on when working. Specially with angle grinder. But nice video, very informative.

[@ashkaash9819]

Exactly what I was going to say. No gloves is crazy

[@michaelbraun6542]

No way ill wear gloves when using a grinder. Totally unsafe for me. ​@ashkaash9819

[@jairvargas5956]

You just might be a clutz bro! ​@@michaelbraun6542