Rigging Suspension with Spring in 10 Minutes | blender 2.8

Subscribe for more Blender 3D tutorials and content. Let me know what you would like to see next in the comments below!
Get access to all the project file
/ index3d
www.gumroad.co...
-----------------------------------------------------------------------------------------------------------
👀 You can find more of my work on:
Instagram : / index_3d
Twitter : / index_3d
Facebook : / index3d
website : www.index3d.com
-----------------------------------------------------------------------------------------------------------
Tag me in your artwork on Instagram for a chance to be featured at the end of the next video
For Business inquires email - [e-mail]
#Blender #rigging #Index3d #Tutorial

[@jerroking80]

You can slow down the video in play speed 0.75 and you cn follow it easily

[@S.M......]

You can slow down the video playback at a speed of 0.75, and you will still not understand anything

[@jabberdoggy4444]

Just found this playlist, and so far it is very fun. I'm learning lots. I have not encountered any problems yet using Blender 4.2 with your instructions. Thank you for making it available!

[@TTTristan1]

Just what I was looking for! And direct and to the point, with no introduction. Perfect video.

[@robbie9629]

Thanks, this was exactly what I needed to know. I found it difficult to follow what you were doing but with a bit of replaying and a lot of experimenting with the settings I got there in the end.

[@Index3D]

Glad it helped!

[@Mokmaheim]

Hello. I also learned a lot from this tutorial. I didn't know the difference between extruding a bone and creating it in edit mode. After seeing this tutorial, I can see exactly... I didn't understand the hook function at first... After following it a few times, I understand it. Thank you very much!

[@Index3D]

Glad it was helpful

[@janardanpethani5755]

it's a suggestion. Use any add-on so that viewers can see which keys are you pressing...

[@janardanpethani5755]

Thanks for the tutorial.\(￣︶￣*\))

[@Index3D]

Hey thank you for suggestions I always use screencast key you can check out my other tutorial. But unfortunately this time i forget to enable the add-on. Thank you for watching.

[@BATCH3]

Thanks a lot! i was looking for somthing like this for the past 6 months but couldnt find someone that would explain it all like you did! Thanks again!

[@TheyCallMeLuxx]

Absolutely awesome tutorial mate, helped me make movable coil suspension, I will say it was a little hard to follow as a beginner as you’re pretty fast but I got there in the end 👌🏻

[@jake._.]

no bullshit straight to the point and very helpful video

[@lolathepinky4857]

Thanks a lot for the tutorial ! Very clear and well explained

[@Index3D]

Glad it was helpful!

[@h-unte-r_]

thanks Bro, it's very important moment in the Blender 👍👍👍👏😀

[@3darches551]

Good tutorial, but it was a little bit quick. I suggest to talk and click slower and clip the video when you said something in wrong order. But anyway I am very happy that you are here. I will see more. I need to improve in rigging. Thank you!!!

[@Index3D]

Thanks for the tip

[@jasonnehceis3267]

You can do the same thing with only 5 regular objects, NO bones at all and much fewer steps using the "track to" and "stretch to" constraints and the hook modifier to get the spring stretch without deforming the radius of the coils.

[@TacticsTechniquesandProcedures]

Does it transfer to a game?

[@jasonnehceis3267]

@@TacticsTechniquesandProcedures I'm the wrong person to ask that question.

[@karanshirur4190]

@@TacticsTechniquesandProceduresno

[@karanshirur4190]

Will not work for any other flexible model

[@blenderzone5446]

That's a serious tutorial!

[@wongsakornwattanavekin7328]

But how to constrain the pivot on the top? after all done well I it works perfectly fine in the x view only. Now I tried to add location constraint to the top too bone, but the bottom one I has no Idea what could stop it from swinging all over the place

[@RecNinja]

Hi, thanks for this, I will learn for my next video ;)

[@Index3D]

Great!

[@abhiAk49]

Great Tutorial!

[@Index3D]

Thanks!

[@nategreyson6014]

Your tutorials are amazing. You are a legend, man!

[@Index3D]

Glad you think so!

[@danieldesembrana3998]

very helpful! thank you.

[@bleve97]

great tutorial, thank you

[@YuriKruglov]

The best tutuor! Thanks!

[@bao007fei]

Awesome tut, big thanks

[@Index3D]

Glad you liked it!

[@jonilo8792]

Very helpful. Thanks!

[@jerome_guigue]

Very nice tuto !

[@daniyalabid3770]

you are great man very helpful! please post more tutorials on constraints.

[@Index3D]

More to come!

[@net5978]

Man you're amazing!

[@redratpetrax]

Like you happy voice on end of video. Nice TUT ..

[@kombi8864]

Good tutorial, worked for me. But watch it on half speed and I would say it is an tutorial for advanced Blender users a beginner just would not know how to continue sometimes... Still thank you.

[@TeamDeltaAngelOfDeath]

Oh my god, thank you!

[@gasser8041]

So mutch thanks!

[@000pdx]

Thank you!

[@SSCAT0]

Ty ❤️

[@blender1927]

Great bro

[@timothyj67]

when I try to add a screw modifier it turns my object into a screw, I dont have my object selected . Im using blender 3.2 and it doesnt have that circle that you have

[@Isabel-nx7pr]

Hello, great tutorial, I was wondering how can I export this to urneal engine? Thanks i can't figure it out

[@siddharthpaul6539]

thanks a lot!

[@YuriKruglov]

The main issue is that you cant export this rigged spring to fbx as mesh because it is curve. So this method is limited to blender use only.

[@itellyouforfree7238]

@Con Koumis but then the coil itself will deform when you stretch/squeeze the spring

[@HemantSingh-wr2sq]

If you close your eyes and listen carefully it seems like nawazuddin is helping you rig.

[@RomboutVersluijs]

This method looks great! I saw a different method where the modeller used single bones for each segment of the spring. Lots of bones to keep the spring from squashing. This approach is much simpler and works like a champ. CN i ask how came up WI this idea?

[@Qeirutimipinikiti]

legend

[@parks-]

nice tutorial, but how would i make dynamic suspension?, i cant find any tutorials for dyamic suspension

[@Loatysfab]

Is this the same concept for leaf springs and coils

[@musayazar3069]

can you do the lesson of this modeling

[@evanwilliams1199]

Is there a simpler way to rig linear bones? This is great, but it seems needlessly complicated. Like, is there a way to create a linear joint using only one bone, for example?

[@RomboutVersluijs]

Complicated? I saw a different method where each small segment of the specific Ng was a bone, thus a gazillions bones. This approach is much cleaner and simpler

[@dddastrf7602]

how to you get the shock

[@hirohirog9364]

Awesome

[@aadityautkarsh6115]

Waiting 😍

[@martin3873]

5:40 it`s not neccessary to use 3d cursor, active element will be fine

[@andrea_ciani]

Great video but few things, you could slow the video to let follow more easily and the setup seems to be a bit complicated using bones. Why you used bones instead of object constraints? Lots of work to simple limit movement. Thank you!

[@kenkioqqo]

This is not the clearest explanation, but after rewatching a few times at 0.75x speed, I've finally done it.

[@basejumperdx4573]

a tutorial series on how to rig an excavator

[@SaiyedR]

How this rig work in game??

[@EinMeister]

is it possible to do it with mesh? it stretches awfully in my situation...

[@Index3D]

No i don't think so

[@Index3D]

Maybe with shape keys

[@musayazar3069]

do you do the modeling lesson my friend

[@OANVanh]

work with game engine?

[@Index3D]

It should but i don't know Never used game engine

[@Jdgo95]

Good explanation thanks, what shorcut do you use on 1:18 ?

[@Index3D]

thanks you for watching Its F2 for renaming.

[@williamhutchins479]

Will this translate easily in 3.3?

[@Index3D]

Yes

[@alkavyrus]

could easily do a 15 min calm video instead of rushing and saying "sorry" 20 times

[@Index3D]

Yes sorry +1

[@Index3D]

Please watch it in .75 x speed.

[@Villio.]

Waiting

[@michaelcorleone8699]

A bit too fast but very useful tutorial.

[@mrdixioner]

In Cinema 4D this is much easier and faster: no bones are needed, all restrictions and dependencies are made on the objects themselves. In Blender, everything is too complicated as always.

[@henriramert3030]

nice video music is a bit to loud in my opinion

[@Index3D]

Yes I will post future videos without music

[@thunderenderfx]

Bro, just a bit of advice. Make a script and then do the tutorial.

[@S.M......]

You can slow down the video playback at a speed of 0.75, and you will still not understand anything

[@jasonnehceis3267]

At half speed, it sounds like he is drunk blendering, LOL!!.

[@GrawvyRobber]

slow down and talk clearly, youre mumbling and slurring. Hard to understand.

[@Hashemiro]

Explained so messy and complicated

[@elkustero9559]

Sorry but this is one hell of a confused tutorial. To me it feels like you just made this tutorial on the fly. You had to redo so many steps during the tutorial because you were unsure where you were going. In the end i was left with more questions than answers and, yes you guessed right, confusion

[@p3ngine]

That's not how you make a tutorial.

[@Index3D]

Yes sorry I did speed up video which is not great

[@chosenonemedia8337]

Very good, thank you!