Рет қаралды 1,207,310
Full details of how a crystal radio works, right down to the electron level.
We start with a demonstration of all the parts in action, showing how the radio waves interact with the antenna and antenna coil to produce a fluctuating magnetic field, which induces electron flow in the tuning coil, which works with the tuning capacitor, which is followed by the diode and crystal earpiece. We talk about why a leaky germanium diode is needed with this particular circuit or how a bypass resistor can be used instead.
That's followed by how the tuning is done using a tuning coil in parallel with a tuning capacitor, which together are tuned to a resonant frequency the same as the radio frequency by adjusting the coil's inductance and the capacitor's capacitance.
Then we show how a radio wave is formed from a microphone's audio wave using amplitude modulation (AM). This then shows how the diode is necessary for converting the radio wave back to an audio wave for use by the earpiece or speaker.
Next we discuss selectivity versus sensitivity and why a separate antenna coil is used.
An finally we show a few other crystal radio circuits.
Thanks to the following for reviewing development versions of this video:
Slovenija12345 of / slovenija12345
and
Charles Wenzel of www.techlib.com...
See also...
How to Make/Build a Crystal Radio video, the radio explained in this video:
• How to Make/Build a Cr...
Crystal Radio Troubleshooting and Tips video:
• Crystal Radio Troubles...
How to Make an Amplifier for a Crystal Radio Earpiece video:
• How to Make Amplifier ...
Make a Crystal Radio Coil with Taps video:
• Make a Crystal Radio C...
There's also a crystal radio page on my website:
rimstar.org/equ...
3D modelling and 3D animation done using Blender 2.63.
To follow me on Twitter:
/ rimstarz
rimstar.org