RISE Armament RA-140 Super Sporting Trigger Review

[@Skwerrlly]

Researching triggers brought me here.Decent review,straightforward and to the point.Thumbs up and I subscribed.

[@ChristianConstitutionalist3192]

According to Rise Armament, the Rise Armament RA-140; Now comes with Anti-Walk Pins. I have the RA-140 Gen 2 it came with Anti-Walk Pins; I got an Average Pull Weight of 3 LBS 3.7oz with the Lightest being 2 LBS 12oz and the Heaviest at 3 LBS 11.2oz

[@earldelsanto]

Took me less than 1/2 hour to completly install and test fire. Omg what a fantastic addition.

[@Cloud4hundred20]

I am worried about light primer strikes that’s the main reason for not upgrading my triggers but I do want a lighter trigger pull so I bought the drop in can’t wait to see what happens I hope everything works good

[@earldelsanto]

Don't worry. It's not an issue.

[@izazayahbanyahawadah]

It's under weight because the retention screw raises the weight. They factored those in to the advertised weight.

[@justgriff1295]

Good review, exactly what I was looking for.

[@FreedomInc]

Good review

[@duckwacker8720]

There's set screws to keep it tight and keep the pins from walking.

[@thaiguylvnvrs472]

I can't seem to tighten the two set screws at the bottom any idea?

[@ronaldprovencher7570]

I have had two RISE Armament RA-140 Super Sporting Trigger and both had problem of failure to rest ..had to work on both before they would work correctly .

[@jeffersonbuckles8905]

Just got one and had the same issue. I just took a little sand paper to the hammer where it contacts the disconnector. After literally 10-15 light passes and some oil it works perfectly now!

[@ronaldprovencher7570]

@@jeffersonbuckles8905 : Why couldn't they come out of the factory like that ????

[@duckwacker8720]

I've got 6 of these and all are amazing. It's crazy how high quality they are for the price. I paid $75-$100 for mine.

[@Cloud4hundred20]

I’m so pumped to have a 3 lb trigger pull?

[@rudyruiz9615]

did I see correctly, you needed to remove the grip to remove the safety to drop in the trigger?

[@mikem1738]

I installed my 140sst yesterday and did not need to remove the safety. it fits, mine was flat

[@earldelsanto]

Yes

[@DaveGrizzly4535]

Just installed one of these in my 300blkout ar

[@irafowlerjr.7492]

helpful info, thanks

[@glenndj4215]

Is it just mine, but only 1 set screw on the inside right in the middle. Only one. Came with own anti walk pin

[@bobwiley2479]

New gen doesn't have tightening set screws that bolt in the middle isn't a set screw

[@glenndj4215]

Thank you! What a relief. Thought i had a bad one

[@earldelsanto]

Don't mess with that .

[@k_sey.9370]

Update? Still using? How many rounds any complaints?

[@j.zacarias3242]

Hi, dis you build that trigger jig?

[@j.zacarias3242]

Sorry, thanks for the video.

[@adtube4186]

What boy?

[@j.zacarias3242]

I didn't say or mention a boy. I asked if you made the trigger jig.

[@sunnycat69]

How is the curved trigger shoe vs. They're flat face trigger do the flat triggers really give a lighter feel to pull weight like people

[@Cloud4hundred20]

I keep hearing the flat face trigger takes little less leverage for the trigger break. I just bought my first flat faced trigger so I’m excited to see just how nice they are…

[@WeltonMadureira]

Can be used with the original pins or must to be replaced ?

[@blakecraft2609]

It can be used with original pins but it may walk a little bit. However according the company the newest version of the trigger is supposed to come with pins for it. Not sure if they stop the walking.

[@earldelsanto]

I used same pins

[@buckeyeblaster]

Thanks for the review. Just got one.

[@hnguye22]

Hammer spring is heavy type?

[@turdfurg47]

I thought the ss stood for single stage trigger

[@linkchen8245]

its on sale now everywhere for less than 90 LOL

[@earldelsanto]

Best trigger for the money by a mile.....91 bucks delivered. Made my AR a new animal. Holly cow. I dont see bow you could do better. Really

[@j.hunter5007]

Love these videos where guys pretend to do technical reviews and can't use the instrument properly. It's NOT 2.5 pounds on the trigger pull - it's TWO POUNDS and FIVE OUNCES. Almost every trigger review I've seen lately features the same error - confusing the ounce measurement as a decimal reading of pounds.

[@bradmetcalf7832]

I would rather they cut the price and do away with "Needless" machining that provides no added gain and only cost to consumer. Why do "rounded" edges amount to shit to a shooter when they are inside the lower receiver? Does it make you get pouty face when you clean the weapon? @2:58" Ya don't want to tamper with any of the set screw's" You don't know what your talking about Mr Exspurt. Go watch the manufacturers video. You freaking guy's kill me with all your knowledge.

[@Khjix9]

Well aren’t you a fucking asshole for no reason. Speaking on other people’s “knowledge” when you can’t even grammatically structure a sentence. Jesus Christ. Get over yourself.

[@leatherneckprepper4477]

Poor quality. Will not hold reset. I’ve tried two now. Don’t waste your money on low quality parts.

[@jeffersonbuckles8905]

It is really good quality, maybe you should just learn how a trigger works.

[@leatherneckprepper4477]

Swanky Banker Well let’s see I took several triggers back to where I bought them and they had the same issue that I did so it probably has nothing to do with not knowing how I trigger works which I do know how a trigger works.

[@techti8792]

@@leatherneckprepper4477 oh man. I was thinking of getting this trigger lol. Guess I have to do more research. So what you recommend?

[@leatherneckprepper4477]

Tech ti I got another alg