Tusk Aluminum Motorcycle Brake Pedal Installation

[@slchazmatff]

Remember on some Honda's there is a clip behind the pivot bolt. You must remove it before removing the bolt. If you don't it may strip the bolt hole.

[@justincavinder5504]

On most bikes there is. I’m surprised they didn’t mention that

[@j.d.7321]

What?? A new brake pedal does come with a fricken seal?

[@vegasxventures]

Holy crap this thing is awesome! It turned that Honda into a Yamaha! =) jk I have one and love it!

[@rmatvmc]

They provide really good feel to the bikes braking system . We like them too!

[@motojaymn4131]

Love the joke

[@Drain09]

What do you use to crimp the metal on the line? look like wire cutters?

[@Partnerthedog]

Think about what you said. Wire + crimper lol. Wire crimper

[@TOCA550331]

hay algun ajuste del recorrido del tornillo en el cilindro maestro? gracias

[@Samuellalexandre]

Hi, thanks for the video, what is the size of the washer?

[@mizzysuave6879]

Do you know the specs of the pivot bolt ? I ordered one and it didn’t come with one and my oem one doesn’t come off the brake pedal

[@MrXavi77]

Great video man!! Thanks!!

[@SRTKID-bq5nz]

Thank you!

[@erickcastro6601]

Can you help me find a brake pedal that fits my 2015 Honda 250l ?

[@JayGee6996]

www.as3performance.co.uk/honda-crf-250-l-2012-2017-crf-250-m-2013-2017-forged-gear-lever-and-rear-brake-pedal-combo-set/

[@paulsalus7525]

Where can I find a back brake pedal that will fit my CRF250L 2016?

[@JayGee6996]

Paul Salus follow the link I just posted

[@jt86tn]

Wish I could still find this in green for a Kawasaki KX250f. All I can find now is blue.

[@rmatvmc]

Unfortunately, we do not carry this pedal with the green tip.

[@the_qc_rider6896]

as3 performance will have that

[@tomatoknuckles]

My pivot bolt will not come out and is very loose any ideas? It's a yz426

[@mizzysuave6879]

What’s the size of that pivot bolt ?

[@captsam54]

Just bought this for my 2017 Rally.. but it does not fit.. The sleeve on the rally is welded.. not a bolt you can take out... I will have to return it...

[@JayGee6996]

www.as3performance.co.uk/honda-crf-250-l-2012-2017-crf-250-m-2013-2017-forged-gear-lever-and-rear-brake-pedal-combo-set/

[@manoliswec5674]

do you guys have a pedal for a 95 cr 500? cant seem to find in your store and i dont know if it fits from some other models.

[@rmatvmc]

Unfortunately, we do not have any brake pedals for your bike and searching other retailers isn't turning up any results either.

[@manoliswec5674]

@@rmatvmc thx for the quick response!

[@tahaks]

what is a brake saver cable for?

[@rmatvmc]

It is meant to be a barrier to stop things getting lodged in between the levers and can help keep the levers from breaking off completely.

[@jamillwilliams4667]

Do it work for pit bikes

[@SD-ir1vf]

What’s the point of the strap. If you bend or break the pedal you would need a new one and there’s no point in saving the old one.

[@rmatvmc]

The lever saver acts as a limiting strap so that rocks or other debris don't get wedged between the lever and frame to hopefully avoid breaking or needing to replacement the brake pedal. Thanks for checking out the video!

[@Jakg8484]

Rocky Mountain ATV MC this is the exact thing that just happened to me last week. I went down on the right side in hard sand. The weight and the speed of the bike caused sand to get wedged in between frame and pedal and snapped it right off.

[@barbernick7553]

Where can I buy a pivot bolt ? Help !!

[@rmatvmc]

Your best bet is to check your bikes OEM parts finder: www.rockymountainatvmc.com/oem-parts Or maybe try a site like eBay.

[@FirstGendodgegarage]

Dealer

[@jamillwilliams4667]

I have a 125 RFZ

[@jakek7112]

This exact item is on Amazon for 30

[@Partnerthedog]

Yeah and it's made in China. I just got the 30$ fender eliminator for my drz400sm on Amazon and I watched the video how to install the 100$+ tail tidy and it doesn't look any nicer, it looks flimsier in fact because it's thinner, lower profile and stuff. Cheap is good for some things, not all things