How To: Tusk Swing Arm Chain Adjuster Bolt Repair Kit

Click Here to Get Your Tusk Swing Arm Adjuster Bolt Repair Kit
www.rockymount...
The Tusk Swing Arm Chain Adjuster Bolt Repair Kit is the perfect option for anyone with damaged or seized chain adjuster bolts. This kit will allow you to drill out the previous adjuster bolt and/or clean out the damaged threads, press in a new threaded insert and then provide you brand new adjuster bolts and nuts. Included in the kit are: 2 Adjuster bolts, 2 Nuts, 2 Threaded Inserts and 1 Drill bit.
Visit www.rockymount... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Us On Social Media!
FACEBOOK: www.facebook.c...
INSTAGRAM: www.instagram....
TWITTER: RM...

[@bystander15]

thanks Charles

[@hoosiertrailrider]

Nice, good to have a go to when all else fails.

[@aarontomchek7332]

I tried this kit and it’s a M8 and stock was M10. The insert fits super loose in my swingarm using the supplied drill bit.

[@jonathanbowling6184]

I know rocky mountain recommends this on certain bikes but could it be used on a smaller bike such as a 2011 kx100

[@evanogle1409]

What type of drill bit is used to drill through the bolt. And what size. The kit is not available on the site. Also what threaded inserts are these?.

[@TheGreatBrownBoy]

if you take this on be real careful drilling, i ended up with some crooked holes and ended up with a nightmare. Also the factory bolts were 10mm and the bolt it comes with is 12mm. The original holes just didn't work i ended up just dremeling an oval hole so the lock nut has clearence.

[@brianbaker2484]

Looks like this is what I'll be doing on my rm250

[@tuckerfinnicum3949]

My chain adjuster bolt isn't stripped but the flat end of the axle the block holding it in place where the chain adjuster stops it from moving any closer to the bike has a big gouge in the block so every time I go to loosen the axle is keeps spinning and theirs nothing stopping it

[@Nifty_556]

03 RM125, tried to loosen the chain adjuster bolt, then the whole bolt just snapped in half.

[@dnickens20115]

So where do you get these inserts that's an awesome idea

[@Buddyscreation410]

Can this be used on motorcycles as well?

[@rmatvmc]

This will work on many bikes! You can see if your bike is compatible by using the drop down arrows on the product page and selecting your motorcycle. www.rockymountainatvmc.com/parts/tusk-swing-arm-chain-adjuster-bolt-repair-kit-p

[@Buddyscreation410]

@@rmatvmc thank you very much

[@josemorgan4524]

Wait..Won't the bolt fly out if the insert isn't welded into place??..There's literally nothing holding it there. My Bolt broke because my chain was too loose and i was trying to adjust it. Something inside my swing arm Seized and didn't let the bolt adjust the tension on the chain.

[@rmatvmc]

The threaded inserts are a press fit and don't need to be welded in.

[@angeltavarez7878]

I need to do this to my bike i got the same exact issue , I’ll pay if someone do this for me , help me please im in New Jersey

[@jacobfeliciano6046]

It doesn’t work

[@gogorome456]

Why that