My AWD Hellcat Magnum gets a Durango Hellcat Dash!

I was able to get the dash all buttoned up and ready to 3d scan so I can make a new piece and have it wrapped in leather.
Linktree - linktr.ee/junkyarddave
Business inquires @ [e-mail]
Patreon - / junkyarddave
Instagram - / junkyard.dave
*Send Me Fan Mail*
David Nenno

[@robsdeviceunknown]

I still think this custom dash is the most technical and seemingly impossible task on KZbin. This is crazy. Nothing I would attempt. I know you can do it, so I'm excited to watch this progress.

[@robsdeviceunknown]

Also, I have doubts that the bondo will hold up with the flexing of the dash. I can see it breaking loose and cracking. I hope i am wrong.

[@tonyanderson6493]

@@robsdeviceunknown i believe its just to make the shell, dave is smarter than to use filler for a dash

[@robsdeviceunknown]

@@tonyanderson6493 Ah ok, I was thinking that it was indeed for the mold. Glad I'm wrong.

[@parsidhu9261]

I tried to make a subwoofer enclosure.... speakers in there, thankfully its in the trunkt... very ugly to look

[@jamiedriscoll9781]

Did you catch his roof? Custom fiberglass.

[@itsmeagainmargret]

Try using foam next time to take up the large voids. It's how they do it with model railroad layouts.

[@IR-nq4qv]

I've been stoked about this build since day one, stick with it Dave you got this. Knowing you, the one-of dash will be flawless, can't wait to see the end result.

[@Junkyard_Dave]

I can't wait until it's covered in leather

[@knytrydr73]

Using the front clip of a wrecked car to complete your mock-up is absolute genius. I don't think I've ever seen anybody do that before.

[@HdzpViz]

Man I can’t wait till this project is done

[@jayjacobs1498]

I miss my Clifford (red magnum RT) that was totaled 3 weeks before you did your first magnum. Always wanted to swap the interior and transmission with the charger. U give me hope for my next one.

[@WayneSpider]

I've been watching this from the get go. I love that you never let any obstacles get in your way and didn't go the cheap way. There are a lot of people just adding a front and a motor. You are 100% going from scratch. Absolutely love this. Thankyou for going through all the frustration headache and I'm sure split knuckles to build a beautiful original 1 of 1 actual hellcat magnum.

[@trizzy9566]

Just to be able too witness this legendary process is legendary 🤯

[@dayslife]

Dave, you should make the dash like a cover, with separate internal skeleton sections , that would unable you to use and bolt on all those different original individual pieces without having to cut them for replacement. The dash looks nice

[@sbenitez597]

I’m amazed how he’s building this thing and still doesn’t have 1 mil subs, this thing is crazy, looks awesome 👏🏻

[@Hi_Im_Houston...]

That dash is insane! If you didn't know how many different pieces were used to make it.. you might think Dodge actually made it 🤙🏿

[@Junkyard_Dave]

Thanks

[@blaccghos5528]

Back at it and cant wait to see the finished product 💪🏿💪🏿💪🏿💪🏿

[@412AutoCare]

No that’s ironic. Dave asking/hoping for a discount for his project. Not too long back I asked the same thing outta Dave and was basically told not to have a project that can’t be afforded. Needless to say I got what I needed elsewhere but I rock wit Dave’s creativity and determination. Reminds me of me.

[@waynedalearchery9621]

Just when I think you have done everything, you go and redesign a dash. Wow. Great work!

[@bigsexymuthashutyomouth2546]

Here you go again making us all feel inadequate lol. You have so much talent it's incomprehensible!!!

[@mk-jf1ux]

Here’s your comment after hitting the light button yes I like these videos I think you’re really on with something with planning on 3-D scanning then making pieces to people . that brings it to a new level that is interesting and sustainable business

[@budlanctot3060]

Wow! Ambitious project! I think I would have fabbed up a pallet-like platform to hold up the bulkhead assembly, so you can move it out of your way via a forklift. That way, you won't be stumbling over it in the middle of your shop. Also I think I would have glued some wooden paint stirring sticks onto the dash shell to stabilize the thin dash shell while working with it. I think I would have tried using spray foam and chicken wire to build up and contour the new surface. It would be light and still rigid. Regardless, I like the shape and the new dash configuration, and I can't wait to see it finished.

[@Penstarkid08]

With all the work you’ve put into that dash I would definitely make a carbon fiber one. I would look into that before looking for a 3d scanner.

[@patrickmoodabe9728]

Hey Dave - it’s great you’re thinking outside the box on production of the dash. It seems not too far away where panels will be made to order. & the company you’re dealing with should welcome your vision with open arms. Awesome video. Keep pushing those boundaries. 👏👏

[@ultimateman8738]

Wow! you're creating the factory build Magnum that Dodge should have built for the 2022 model year. I love the detail and direction you're going with your Charger Wagon, Dave. This is a first.

[@kristophkoval2458]

Bro been working on this for years cant wait to see the finished product its so impressive !

[@simscoordinator]

You are a genius and master craftsman. Great work

[@jeffyoung478]

Dave you're a beast buddy always amazed with all that you do.

[@josephvasile2389]

Dave i may be able to help with the 3D scanner. I distribute a few companies that sell 3d scanners and would possibly be able to get you an evaluation unit.

[@Junkyard_Dave]

That would be awsome send me an email [e-mail] thanks

[@josephvasile2389]

@@Junkyard_Dave sent

[@Lordbignall]

Ive been watching since the start of this project.....and holy ut just keeps getting better!

[@anomamos9095]

You're over thinking it. Just take a mold of the out side of the dash to create a cover panel and glue the factory bits you need to the panel with panel bond. You could make it out of carbon or glass fiber or vacu formed plastic.

[@BrucePierson]

Hey Dave, that is not an issue wanting everything to be perfect. It's doing the job properly. How often have I seen work done by trades persons that is not up to standard. That's where doing it yourself makes the difference, because you can take the time to get it right.

[@christianhanseman4726]

If you decide on 3D scanning the dash, you’ll need to add some textures and colours to help mesh the scans together. If you scan it the way it is now, it will have trouble aligning the scans. Food for thought.

[@BassManBobBassCovers]

That's an insane amount of work, but an incredible result as usual. Good luck with the 3d scanner!

[@radiums9413]

I hope your able to get one for a fair price Dave.... This custom dash is really going to make the Interior pop!!

[@gafrers]

Amazing work. So much attention to details, so much work, planning and trial and error. 👏👏

[@MatarM0]

that came way cleaner than what i imagined good job

[@Junkyard_Dave]

Thanks

[@robinomalley6173]

Love your attention to detail

[@haphazard1342]

Can't you hire a scanner operator for an afternoon? That should get you good results without the challenges of trying to source a high end scanner and do the whole thing yourself. Not trying to knock the DIY approach, but it's all about knowing what to hire out. You could probably hire out the whole dash to be made out of composites based on this model, but I expect the cost there would be prohibitive. There's a market for this level of work, but it serves the supercar scene where money is no object. Super stoked to see how you meet this challenge, can't wait to see it in the car!

[@jayinmi3706]

This is a cool idea...I worry that the more aggressive transition to the right side of the instrument panel pod might be hard to vinyl wrap and have come out with no stretch marks. If there's one thing I've learned about wrapping panels in th last 28 years of doing custom car audio, it's that making your shape easier to wrap goes a LONG way to getting a nice result. Digging how OE+ this is coming out. Nice work.

[@natesmemes1794]

Wow, that is going to look so much better than the factory Charger dash, can't wait to see this car finished

[@Junkyard_Dave]

It's gonna be wicked

[@ulysseswallace]

I'm excited for your final product!! Watching you produce this project has been very exciting.

[@attiliojorge2765]

I’m speechless Dave. Such a great build! I never thought about DIY a dashboard but you change my mind. Can’t wait to see the final product 👍🏻

[@vettepicking]

Nice dave, i think i would just use that as a plug for a fiberglass dash, then have it covered in leather. If you do it yourself then you will be happier........

[@ChinitFxt]

Def need more subscribers this guy work is awesome

[@Smokkedandslammed]

Brother, you definitely have some of the most creative builds out there, I can't wait to see this bad mama jama done 🤙

[@LilNephVlogs]

this man he is so Daumn smart. I’ve been watching his videos for a while and this dash is just so CRAZY 🔥I LOVE IT.

[@dukie1616]

Absolutely love this project, been glued to it since concept and I’m so stoked he decided to go for the custom dash. Totally amazing build, Dave is an engineer, mechanic and artist. Keep up the good work👏

[@ericsturdivant__]

The details on this build amaze

[@Junkyard_Dave]

Thanks

[@Deussues]

This was a great idea because now u could use the Durango infotainment system which in my opinion is way better than the one in the charger

[@deerski4426]

Really enjoy watching the progress on the Dragon Wagon Dave. Dash is looking awesome.

[@HKRXPRS]

I do a fair bit of stuff like this in Australia and I can tell you you're doing it the hard and expensive way. Just use cheap plasterboard filler instead, it's a lot cheaper and sands easier. Just do a polyester resin final layer and you can buff that out to smooth as glass perfect for mould making. Anyhow, great progress so far and impressive to see someone on KZbin not cutting every corner.

[@fords289]

You do top notch work man!

[@samm3001]

Make some nice carbon fiber trim inserts for the dash if possible. It already looks amazing. Great job! 👍🏻

[@kevins6661]

Love these videos when you 1st started the car I was like what and now oh it's insane it's so cool!

[@BMWE36M345]

I’ll be honest, I started watching this build because it looked like an interesting project, but I wasn’t expecting to look like much. You have surpassed what I was expecting from you, this looks oem. Can’t wait to see the finished product.

[@repirations_]

I would love to see some custom wood or carbon fiber trim bits near the glovebox/airbag area… would make this car really special

[@Junkyard_Dave]

I wanted to do the trim but not sure if there is enough room

[@johncourtneyscott2757]

Being perfect is a good trait

[@Junkyard_Dave]

Not on YT but I build cars to keep

[@DaveDivesIn]

You really are the man Dave! Nice action 👊🏻

[@independentsoldier4274]

Great work!

[@fartamplifer]

I notice you have a Reznor heater in the junkyard. Fun fact, Trent Reznor's great grandfather founded Reznor heaters in 1888 but the family sold the business in 1963.

[@Junkyard_Dave]

They are a pain to get started but once they are running they are great

[@cannednolan8194]

Will be a nice looking dash.

[@downsouthmobile253]

It's all good ur a perfectionist it's because of that u built this beautiful beast maybe even better than dodge could have

[@bigedsbeachsidegarage3968]

So cool. Great work.

[@Junkyard_Dave]

Thanks

[@johncourtneyscott2757]

That dash looks great buddy

[@Eatongee]

I hope you film the CAD part. That would be cool to see.

[@Goldeal]

It’s taking a long time but for that same reason, when it’s all said and done it’ll be the best custom magnum build yet. 💯

[@jefflutz3764]

That dash will be a great. I'm imagine it's going to fit perfectly in the car great work. You are a great car builder. thanks for the great videos on this channel

[@paulym5814]

Watch Sprayway Customs channel on dashboard refitting. He uses fleece and staples it down the he hits it with fiberglass resin.

[@JOHNABLANK]

This car is definitely a one of a kind build, so I guess it follows to have a one of a kind dash in it. The man hours in this whole project have to be skyrocketing! Glad I'm not paying for it. (LOL)

[@3chodk]

I Love how your Frankenstein-Dashboard is turning out.. I hope you can get it 3D printed, so it fit your level of detail etc., for the rest of the car build. Keep up the good work.. Looking forward for the next video´s..

[@bigsquatchsasfoot1964]

Was thinking Dave and this is certainly no criticism, maybe try using expanding foam for shaping I’ve used it for model making and seen Dave kindig ( I think ) use it for shaping stuff before moulding . This is a fab job but like you say the weight would maybe an issue I guess 🤔

[@actschp1]

I think I would have gone with a spray foam and then body filler. You can use a sander on the foam just as easily and it will flex better than inches of filler. Or perhaps something with strength and flexibility like fiberglass... Awesome work though.

[@JorgejRodriguez23]

Bro it's insane 😳 i hope mopar really sees how talented you are and brings you on board on s built soon..as always much love and a pleasure to be part of your builds!!!

[@reckless1190]

Carbon dash WHAT oh my bad you not doing that 😏😎

[@leonclare3647]

Dave we need the C8, Corvette Sedan 🚘 SUV next 😆🙌🏽

[@Junkyard_Dave]

A limo

[@silolestat9726]

You can always use fiberglass and don’t have to 3D scan it

[@enriqueandujar710]

You should make a collaboration with a upholstery company to make upgrade dashboards for the magnums and interior

[@KuroDensetsu]

A good fiber reinforced casting resin will be MUCH stronger than any of the 3D printable resins. The printable resins are either way too soft and flexible or incredibly brittle. Most of the OEM dashes all use fiber reinforced thermoset plastics of some sort.

[@chriscaine1776]

I would say just get the 3d scaning software the they use on b is for build, its an app that downloads to the newer iphones, and its compatible with different CAD software.

[@CiastekD]

Hey Dave, You could've add the HUD display to the dash, since you are designing it from scratch

[@nestorlugo.]

Once again #NoHelpDave breaks the mold!

[@ryancollymore2518]

You always seem to amaze me you're engineering is impeccable Dodge really needs to cut you a check.

[@PanameraTurboSEHybrid]

@George Jones He never worked for Dodge/FCA.

[@david929190]

I hope you actually finish this one day. Feels like you are over complicating this and getting bogged down.

[@neonpla]

Impressive

[@RLCPLUMBINGLLC]

You should have used spray foam and shaped the way you wanted then use body filler on top

[@theurgy69]

So, I get wanting to make this into a complete single piece dash, but why not just produce and print a shell of the top portion and then attach it to a bottom framing and bracing? Maybe I am not seeing the complete dash to understand how that is possible, but I would think if you end up 3D scanning it, it would have a ton of space between the bottom side that meets the frame and the top side that the leather would get mounted to, given that is all just thick body filler. Either way, I am trusting your attention to detail and the process by which in you intend to approach this, I can't help just think this could be interesting to make in to multiple pieces and then have them all fit together and retain some of the harder print pieces like the bottom side with the mounts and etc...

[@mkmilon1468]

If you ever do make copies of that dash I will be more than interested

[@user-zs1tl7xc2o]

Я думаю от солнца потрескаются. Даже если ты кожей покроешь всё равно будет трещины. А так мне нравится твоя работа. Хэлкат базару нет 🔥.

[@Hamsalad2]

Dave, this is awesome!! Are you going to have the passenger airbag?

[@Junkyard_Dave]

Yes

[@terrybaptist795]

You also have to take into account to make the windshield is going fit correctly and sit flush in the window channel?

[@zaachwildreactionz1636]

Gotta add a 1 of 1 badge on the passenger side of the dash

[@jaydubya83]

@Dodge L-L-L-look at this, come take a look at this work of art right here!

[@timcanizares5240]

Excellent work dave... did you consider using foam and then just shaping it to the contour your looking for

[@stevenmarvo2620]

I wish I had my own private car wrecking yard

[@DatBoiOrly]

i honestly don't know why you didn't just make a mold with what you already have instead of going through all this 3D scanning/printing jargon which is gonna take a hell of a lot more time and money than to just DIY it.

[@UncleSpool]

Wouldn't a resin cast dash weigh like 100 lbs? If I were to make a 3D printed mold, I would make a compression mold, that squeezes chopped up carbon fiber and resin together. It would be incredibly strong, and super light. You would only need to design flanges that accept, like, a million bolts. Are you keeping the passenger airbag?

[@maxst2]

Wonder if you could work with the guys that worked with Rob Dahm on his fenders and hood? They scanned the car and made molds from those scans.

[@efctcollection]

I’m just waiting for Dave to start building an srt 10 rear engine neon

[@chrissiano381]

Instead of dashboard. Call in Bondo board.

[@dougwall675]

Dodge should be coming to u for design ideas lol

[@dougwall675]

@George Jones well they obviously don't listen with all their boring ass designs

[@ldouglasvf]

Make the dash carbon.. top half carbon bottom half leather keep it different

[@downsouthmobile253]

Don't put to much filler since the windshield isn't in place u can easily go overboard with it andnleave ur self no room with the finished product

[@claytomgraham4680]

Why didn't you use file instead of all that body fill it would of lighter other places use it on boots and seats it would make it have a soft and rich feel

[@claytomgraham4680]

Sorry ,spell check ment doors panel's

[@TheDja209]

Couldn't you have stretched silk and used fiberglass/resin instead of all of that body filler? Then use just a small amount of body filler to fine tune it?