Thank you for watching! Let us know if you have any questions! ► If you are interested in our content, check out our channel page for more informative trucking related videos bit.ly/35YO3kN ► Feel free to use the video chapter to watch the diagnostic tools that you are most interested. ► OTR performance diagnostic tool is the best scan tool for owner operators and small fleets. Use channel exclusive promo code road3333 to get $100 off of your order today bit.ly/3O3wshT
@TheBigOrangePumpkin2 жыл бұрын
Hi. Can you change the speed limit with the snap-on? Please confirm Your videos is really helping
@raywebb8215 Жыл бұрын
I’m ordering the OTR that you reviewed and trying to use the code that you gave so as to help you for helping me but there’s no place to enter it. They are having a sale and there is a prefilled $200 discount. Before I order is there something that I’m missing that I need to do to use your code?
@SaerTurner-wn2qh8 ай бұрын
the snap on is not a one time pay you have to renew each of them licenses subscriptions every year and it totals almost 3k per year and you do not get off highway or agricultural where with the Jal test and Texa you get far more for your buck and more coverage and function than the Snap on and the Texa is the closest to OEM software you will ever get but if you want a unit Like the Snap on get the Bosch ESI as you will get OEM as Bosch Makes 90% of the actual oem tools and writes the software for 90% of the Equipment out there And NEXQ does not write any software they just make an interface all the software is written by Bosch and Dynamic programing (deplph) as they make 90% of the ECU ECM and computer modules and the Bosch they also have off highway and Agricultural and a full windows tablet not a CE tablet
@jedidiah40042 жыл бұрын
My old job had the Snap on Prolink Ultra, there were a lot of missing bi directional functions across a lot of platforms and more often than not the test that were present were not supported by the ECM. Id never spend money on anything but OE software personally.
@dcautosparky Жыл бұрын
SnapOn is not dedicated to the truck side of diagnostic. Texa and Jaltest are dedicated. What they sell they stand by. I use jaltest and Texa and Autel CV. These 3 get me 99% jobs done. Jobs like ECU programming are better to send to the dealer to program. Texa for American trucks. Jaltest for European and Japanese. Autel CV for Japanese coding and writing, and back door entry for speed unlocking, and immobilizer turn off when doing ECU swap to test.
@MrDerichilliard2 жыл бұрын
just ordered the otr unit. thanks for the code, total was $700 with code. thanks for putting out good videos. question, is landstar load board any different from spot market. Owner op vs landstar?
@jaysonsears86862 жыл бұрын
Good content. I work in a fleet that uses strictly OEM systems (vmack tech tool, Cummins insite, Alison doc) good to know there are some options for techs to get more versatile equipment. We also have jpro for any misc stuff we have. I find jpro borderline useless to the OEM but come in hand a few times and seems to be getting better as they update it
@truckingandfixing2 жыл бұрын
Thank you for sharing your experience! 👍
@CrazyxxxUkraine7 ай бұрын
Y’all please don’t buy the prolink edge just based on this video.. it does a lot but also they leave out certain tests so you need Insite anyways and it doesn’t do Ishift clutch calibrations and you WILL HAVE TO PAY MORE IN A FEW YEARS WHEN YOUR SOFTWARE IS OUTDATED I LEARNED THE HARD WAY DONT BE ME.
@CrazyxxxUkraine7 ай бұрын
Also Snapon lied to me said once you pay you got it.. a little white lie because once you got it you do but then in a few years it’s time to spend 1500-3500 more just to be able to keep doing regens
@donmunro14411 ай бұрын
I've got 3 trucks. I have the otr in 2 of them. The driver can plug it in and then tell me what's going on. Then I can make an informed decision. I keep insite with nexiq 3 adapter in my truck. I like that the otr system is simple and the driver doesn't have to have a degree to run it.
@collenwallace85158 ай бұрын
Jaltest is a lifetime license with optional updates. Why did you say it had a subscription fee? Also if you buy Cummins Insite through a certified dealer, it takes max 2 days. Who did you buy from to make it take 6 weeks? A lot of information on this video is inaccurate.
@elizbararchvadze76198 ай бұрын
Jaltest asks annual fee to use software, its texa that is lifetime
@SuperFullin2 жыл бұрын
Very useful content! Thanks much for sharing all this knowledge. 💪👏👊
@truckingandfixing2 жыл бұрын
You are welcome!
@lennoxbarnett13432 ай бұрын
I would like you to teach me to teach me how to scan my name is Lennox
@TROSS59602 жыл бұрын
What your recommendation on a shop only working on medium duty? I have a zuse for light/medium truck but starting to get more cummins 3126 c7 and dt466 in
@gregorysummers9582 Жыл бұрын
I have a 2013 Paccar MX, it runs pretty good but has several fault codes, what can you advise me
@jakebob1152 жыл бұрын
Can the snap on do just about everything insite can? How about on caterpillar?
@jameskingsbury58 Жыл бұрын
Did you ever figure this out?
@jakebob115 Жыл бұрын
@@jameskingsbury58 na bud.
@AnthonysResurrectionGarage2 жыл бұрын
What do you recommend for a 1 truck Owner Operator with a 2013 Mack MP8/mdrive with access to bidirectional control? Do you have any experience with Autel?
@lennoxbarnett13432 ай бұрын
I'm looking back for an answer from you
@lawrencenelson1324 Жыл бұрын
Hey harbor freight has her to call Zürich heavy duty trucks in across about $379 for a one time fee can you do a report on that one as well
@BlockBallerRecordsАй бұрын
A lot people sleep on Zurich but that thing picks up codes well and does force Regens on Cummins and Detroit pretty good
@davidandrews27424 ай бұрын
Way to expensive. Get a 100 version
@monto721 Жыл бұрын
Question you pay $11k for snapon besides you pay every year for licenses? Can you explain thanks and great video
@johnp1262 Жыл бұрын
You pay for it one time only, not yearly. You can get the master which is cheaper than buying all licenses individually, or get the basic and just license what you will use, say just Cummins and Allison and save some money.
@ziwilliams792 ай бұрын
What about J-Pro?
@neilleatham5662Ай бұрын
Thanks I've been considering the otr but haven't heard many reviews on it. Your reviews is about where I'm out starting out as mobile from many years of working in shops
@oknar56 ай бұрын
Hey Ryan, Thank you for posting this video. I found it very helpful. Can you tell me if the Snap-On tool gives you updates even though there’s no annual license? Also, do you have an opinion (or review) on Noregon’s JPRO software and adapters? We’re looking for something that might handle Mack, Paccar, Ford and Komatsu. Great content! Thank you.
@davidb.58072 жыл бұрын
I like the idea behind the Texa, however I always reach for OEM software.
@echo5226 Жыл бұрын
You think Texa is a good tool? I've been thinking about getting it.
@chrisbrown1295 Жыл бұрын
Jpro seems to pick up more than snap on i also use the same snap on as you it is a must for paccar
@439530 Жыл бұрын
Can you perform a DPF reset on a paccar with the snap on?
@malukojoexvi99577 ай бұрын
what would be recomended for working on HINOS, scaner wise, other than buying DX3 and laptop/nexic
@ronaldwilson6508 ай бұрын
Thank you. i own a CT660 also have ag equipment and construction equipment and diesel pickups. looking at getting a diesel laptop system. its only system i've found thats an all in one with caterpillar trucks. any advice on other systems or if diesel laptops is a good way to go or not?
@DocsPropShop Жыл бұрын
Great video! Question Do you recommend Snap-on Edge for cummins as well, and have you used it? My Dealer is offering a deal on my trade in of Nexiq iq. It's great for Detroit but doesn't have the update for cummins years 2014 and up.
@nilton1044 Жыл бұрын
What a waste of money for $1500 bucks you can get a laptop or table load with OEM software hey don’t get me wrong I love snap on but not worth the money
@georgiapatriot4575 Жыл бұрын
I have a 2017 T680 with ISX and I use Insite, but you can't use it to admin the Bendix system or the cab controller. I was thinking about looking at getting JPro instead, but the jpro sales people never contacted me back.
@jasonhudgins3252 Жыл бұрын
I'm looking at getting the pro link edge. I have one try out to see if I'm interested in it. I was wondering how to enable the engine braking with the cruise control turned on. The truck that I'm working on is a 2019 Kenworth t880 with a Cummins x15 engine. Do you have any ideas?
@111Moises111 ай бұрын
how you ever try TEXA TXTS DIAGNOSTIC TOOL please take look
@xNightWolf95x2 жыл бұрын
Do you know where to buy davie software? Diesel laptop sells it for $3000, where would I go to buy it directly from paccar?
@JuanVasquez-x9s8 ай бұрын
I HAVE AQUESTION WHAT SCASNNER DO YOU RECMMOMED FOR OLDER TRUCKS LIKE 1999 AND DOWN?
@jeremyporter17139 ай бұрын
I’m in Youngstown Ohio!! Thanks for the input I’m in the market for new versital software
@musahawkins8765 Жыл бұрын
Would u reco.w d for a fleet tech im interested in hetting it id only need like mack volvo allison and a couple of the add ons with the tool alone like 4500 seems worth it for time and function does it handle soot resets forced regen amd pid for pressire temp ect.
@jasshans56163 ай бұрын
is there any tool out there can teach you how to perform repair on semi trucks
@jamesgibbons24692 жыл бұрын
Do you ever use the diesel laptop hand held code scanner and regen device or even the diesel laptop its self
@truckingandfixing2 жыл бұрын
I haven’t used diesel laptop.
@dirtyhandscleanmoney33462 жыл бұрын
Stay as far away from that pos as you can the shop I work in bought both and they a huge waste of money the hand held don’t work at all the texa program is very difficult to use won’t diagnose hardly anything it’s very generic
@keshawnthomas104811 ай бұрын
Engines in boats what would u recommend? Can I use the same tools as the trucks ?
@jasshans56163 ай бұрын
hello does it teach you how to work on all those engines
@北洋军阀2 жыл бұрын
could you please tell me which one is the best for Paccar MX 13?except davie 4……
@MrBighum Жыл бұрын
Awesome video I’m not far from you I’m in Youngstown
@johngrabowski29572 жыл бұрын
I have an otc evolve i wonder if they have software for my 2016 isx. Any idea??
@2trillsavage Жыл бұрын
What do recommend for 2009 mack mp8 engines
@439530 Жыл бұрын
Ryan, can you do a DPF reset on a paccar engine made within the last 8 years?
@franciscobenavides12764 ай бұрын
does the snap on do cummins insite?
@reggaeriderr2 жыл бұрын
Gr8 advice and insite
@truckingandfixing2 жыл бұрын
Thank you for sharing your experience! 👍
@Steve.191 Жыл бұрын
Great show thanks 👍
@truckingandfixing Жыл бұрын
Thank you!
@that1technician5 ай бұрын
what would use for 2015 peterbilt
@that1technician5 ай бұрын
579 model
@alexandergarneriii26562 жыл бұрын
i need to get up there to you were your shop at
@popetin1007 ай бұрын
Thanks for de video
@lawrencenelson1324 Жыл бұрын
I meant tool called
@superhola23902 жыл бұрын
Can you show the set up on screen buttons
@foyboy03 Жыл бұрын
Can the OTR change speed limits on truck. Cruise is set to 68. When I go into Canada I have schedule a shop we use to lower to 65. Loosing time. I would like to adjust my self going over and coming back. Also once in Texas I have to bump it to not get killed. Lol. What can you recommend? I have a 2022 Pete with Paccar MX13. Thank you
@truckingandfixing Жыл бұрын
I don’t think it can adjust speed limit
@jasonmoran9099 Жыл бұрын
What about the OTR reset tool instead of the diag tool. Have a cummins isx15 and want to be able to clear codes and to force Regens. Think this would be enough and work well with the isx15
@truckingandfixing Жыл бұрын
I know most people get the diagnostic tool. Because it has all the functions the reset tool has, plus additional useful features.
@jasonmoran9099 Жыл бұрын
@TruckingandFixing it will force a regen even without the message on the dash for a parked regen as well right?
@jasonmoran9099 Жыл бұрын
For the isx15
@michaelpage8359 Жыл бұрын
@@jasonmoran9099 yes
@Josiah_Harder Жыл бұрын
Does the Snap on come with the connector also or do I need to buy that separately from another company? I have a 2019 Peterbilt 389
@johnbeach3804 Жыл бұрын
Depends on what kit you have but the starter kit comes with 3 connectors including the 9 pin and obd2
@dalewood9645 Жыл бұрын
Have you ever tried JPRO with Fault Guidance and NextStep Repair?
@truckingandfixing Жыл бұрын
No, I haven't
@dalewood9645 Жыл бұрын
@@truckingandfixing Please research and try it out! You will not be disappointed!
@PaulGoddard-b2t9 ай бұрын
Does this jpro program work good for you
@christopherlung9732 Жыл бұрын
O{{
@Andy767778 ай бұрын
Only $30 off :(
@truckingandfixing8 ай бұрын
They just changed the terms unfortunately, much lower discount than before!
@hectorivancardonabotero7252 жыл бұрын
Excelente video, gracias!
@alexcorvi22542 жыл бұрын
Any chance you can do a demo of the pro link hooked up to a say cascadia with a DD? Looking to see it’s capabilities vs the oem DL8 which i use everyday day at work
@varindersingh5322 жыл бұрын
Thats nice request Will be useful..
@truckingandfixing2 жыл бұрын
Sure! Will do! Stay tuned!
@truckingandfixing2 жыл бұрын
👍
@coreyprince30562 жыл бұрын
Will the snap on do force regen on Cummins 6.7 and will it calibrate 6.7 Cummins turbo after install I work on primarily school buses and our 6.7 eat turbos
@repairvehicle2 жыл бұрын
What is your oil change intervals?
@coreyprince30562 жыл бұрын
@@repairvehicle usually around 8000 to 10000 in our fleet shop for the government
@repairvehicle2 жыл бұрын
@@coreyprince3056 8000 miles is way too long for bus that constantly in stop and go plus low quality oil is big contributor for turbos to go
@coreyprince30562 жыл бұрын
@@repairvehicle we are actually having issues with the vgt actuators not the turbos but shop protocall says replace turbo and all it’s a heat is in transit style buses the turbo is to close to the frame and gets lots of heat Cummins and Thomas we have sent in oil samples and the analysis said that we are good with our oil change intervals we use good full synthetic 15w40
@repairvehicle2 жыл бұрын
@@coreyprince3056 how many miles do you get before replacing vgt?
@chuckpyle16242 жыл бұрын
What is good for roadside a service
@truckingandfixing2 жыл бұрын
Do you offer roadside service or you need it for roadside service for yourself?
@chuckpyle16242 жыл бұрын
For ck engine light for road service. The snap on computer
@repairvehicle2 жыл бұрын
What can you recommend for pick up trucks with Diesel engine?
@robdabbs4039 Жыл бұрын
Do you know if the OTR tool will work on my 2016 International prostar with the N13 SCR engine ?
@robdabbs4039 Жыл бұрын
Having a nox conversion lower than threshold code come up. Spn 4364 FMI 18
@brad54012 жыл бұрын
Thanks for the video. Got Insite through Cummins. Much cheaper than everywhere else online. Took less than a week for me to get it and they answered questions I emailed them promptly.
@Josiah_Harder Жыл бұрын
You got Insite from Cummins? How much was everything to make that work? Did they sell you the Datalink also?
@brad5401 Жыл бұрын
@@Josiah_Harder Yes. I bought a data link from eBay for about three hundred plus the cost of insite (can't remember how much that was). I believe Cummins sells data links too, but there are cheaper options elsewhere.
@TaurusTheCreator2 жыл бұрын
Thank you for making this video. It is an excellent, no bs explanation and right to point and prices included. This is exactly what I was looking for. I'm subscribing to your channel.
@shhall1980 Жыл бұрын
Differences between the edge & ultra? Looking for myself, private fleet of 6 trucks medium and HD. Thanks for all you share with everyone.
@SupaSwope Жыл бұрын
Could you please make a video showing the software programs in the prolink edge? I am very interested in one but cannot find and pictures or video of that