Bosch HDS250, OTR Performance, and BIG BOSS PDI Tuner - Which Scanning Tool is Best For You?

[@flyingpaddy7525]

Great information thank you for taking the time to make these videos. Bought my first truck a few months ago and got the OTR with the Detroit package. Had it 2 weeks and truck shut off with def level flashing. Traced it using OTR to a blown fuse on firewall and then to a chaffed wire on the back of the one box rubbing off the protective metal cover. We had got a lot of rain the night before and the water caused an arc and the fuse popped for the after treatment module. Fixed it myself so I believe the OTR paid for itself just that one time as if I had to tow to a dealer it would have set me back $700 plus . Merry Christmas to you and your family.

[@truckingandfixing]

Thanks for sharing your experience, I do believe OTR is a good tool for owner operators. Just as you said one breakdown can save the cost of one year subscription.

[@flatbedlandon1942]

Thanks Ryan I just ordered my OTR saved me 100 bucks 800 to 700

[@lawrencebaker7925]

Just purchased PDI.. tired paying tow bills only for mechanic to do force regen.. your videos are great.. thanks

[@lawrencebaker7925]

Where should I get inframe done.. I live in Tucson Arizona

[@truckingandfixing]

I don’t have a good reference here, but if you can wait, we will offer the service in summer

[@lawrencebaker7925]

@@truckingandfixing ok.. had some work done locally and know I have major oil leaks.. hopefully it will hold up.. so you can do it..

[@stevembaya9792]

This is God sent...!! I was just looking into this things today and definitely I wasn't sure which one to buy.You just pointed me in the right direction. I got a 2014 paccar. So I know which to go for.Thank you very very much.

[@donevens4357]

If I was still trucking you would get all my work. Great info Ryan!! Got out because of DEF problems with my 2012, in 2015.

[@truckingandfixing]

I appreciate the support!

[@wilfredorosario9930]

Bosch not look bad but a recommend scaner Cando i have before DD15 and now i have Cummins isx15 and both i can force regents read code and more and can force regents any engine and clear code i have for 5 years cost like 300 i think …..good video 👍🏻👍🏻👍🏻👍🏻

[@truckingandfixing]

Thanks for sharing it! I will check out the scanner cando

[@saml7427]

yes a big boss pdi tuner video would be great!

[@MrRyanrk12]

I would love to see a tutorial on Cummins insight

[@truckingandfixing]

Thinking about getting it down the road, will definitely do a in depth review of it.

[@70jharris]

Thanks for this video Ryan👍 your a first class dude and your honesty is much appreciated.

[@HarryC786]

Man, you great. Just great. Really appreciate your informative videos. Keep coming more I bought hds250. Works perfect on my x15. Again, Thanks 😊

[@truckingandfixing]

Glad it helped! I appreciate the nice words! You made my day! Thank you for your support!

[@BB-nl5ne]

Otr questions, can I send the Detroit adapter in my Freightliner and keep the Cummins on my truck allowing both to sign in as needed?

[@jamessurplus8988]

Ryan, love your stuff Amigo!! Can I use the PDI flash on a deleted truck without conflict?

[@ronniepena8764]

I was thinking of getting the otr but after a few years you will pass the cost of the pdi an also don’t have to be worried of being out of cell service

[@truckingandfixing]

Good points

[@varindersingh532]

Hey, Could you update me if OTR tool can change cruise speed or speed of truck?

[@Khl-d1h]

Have you ever used Diesel Handheld scanner?

[@larrypelayo4867]

Do you have any info on Diesel Handheld ??

[@williammiller9062]

Great video Ryan! I was wondering if you could tell me the main difference between the Bosch HDS 250 and the Nexlink NL 102PLUS? The Nexlink also deletes certain codes and does forced regen and it costs approx $160 to $180.

[@igormilovanovic1563]

Great job...respect from Serbia

[@truckingandfixing]

Thank you!

[@johnbering2260]

What do you think about the handheld scanner from diesel laptops

[@truckingandfixing]

Sorry, I don’t have any experience with the handheld scanner. Couldn’t elaborate.

[@Largecarsteel]

Thoughts on "Diesel Laptop Handheld Pro"?

[@mileswatkins2162]

Using the otr tool can you hook up and use detroit software and do things like send files and tune engines

[@truckingandfixing]

No, it couldn’t do both.

[@tbonepatti]

I been Driving my maxforce 13 in my 2014 Prostar for almost a year and half without doing a forced regen. As far as I know the only thing I can get to do a force regen on this is Diamond Logic builder 3 and NEDs 3 with a Nexiq system to hook up. Not sure if that is right, what do you know ?

[@Rpx587]

what's your opinion on otr reset tool...

[@wolfmantrucker1541]

Great video! That thing could help us all out

[@truckingandfixing]

Thank you!

[@brucehusung7387]

I have a 2011 Pete 389 log truck with the ISX15. After watching your reviews and tutorials, I just bought the Bosch HDS250 scan tool to carry with me in the woods just in case. Today, I hooked it up to check my truck and it won’t connect to my truck. Any suggestions?

[@anthonycaporaletti9276]

Will the PDI Big boss work on Cummins ISB 6.7?

[@AndyGor2023]

Does PDI work on Volvo D13 engines?

[@burgosarmando1]

Did you try it already?

[@Rizz1117]

Do you prefer the pdi big boss or otr performance? Looking to order one on Monday but not sure which to get in a o/o with 1 truck kenworth with x15 efficiency. Thank you

[@truckingandfixing]

Won’t go wrong with either. PDI has more to offer, but a little more expensive without subscription.

[@murraypulliam373]

Whats your opinion on the nexus hp102

[@MrJay-kb8xj]

I have it. Kind of trash. It’ll clear a derate tho. It’ll get you to the shop for a cheap reader

[@phillipfetner3962]

Can you change your governed speed with the otr??

[@truckingandfixing]

I believe not. You can use big boss tuner PDI

[@843niddy]

@@truckingandfixing Will it be able to change governed speed on Paccar??

[@donkauer6744]

I need to do a forced regen on a '21 X15 in a peterbilt. Can I use the PDI to force a regen while driving?

[@truckingandfixing]

Paccar engine?

[@donkauer6744]

@@truckingandfixing Cummins X15e. 2021 Pete. Been about 10k miles since Cummins NW did a regen. After watching your interview on OTR, my def usage has gone up and my fuel mileage is dropping a bit.

[@jakebob115]

Looking forward to video on the snap on tool.

[@iankerr1549]

We got a prolink what you need to know

[@ronniepena8764]

Do they have a plug so you can run the pdi tool and a eld at the same time?

[@ChaMckintosh]

Yes. All you need to get is a mastrack green type 2 j1939

[@FaithWRanch]

Ryan, I'm buying a 2011 Peterbilt 386. What do I need to read codes before purchase. I don't think I will need anything other than to read codes. Thanks

[@truckingandfixing]

For reading code, Bosch should work fine. Please double check to make sure it works on your engine. Otherwise, OTR is a good tool to have as well.

[@berniesands6201]

The last otr diagnostic tool that I had sucked though it stopped working and wouldn't connect to the Bluetooth anymore and it wasn't my signal it stopped working for good and I had to trade it for a reset tool.

[@truckingandfixing]

I think OTR offers warranty for this products. Might contact them for warranty claims.

[@julioc6942]

Great video... I have a 2016 Coronado Cummins ISX15.. was looking at that OTR reset tool , seems simple plug n play. Does this do all the Regens( Def, EGR,etc) ? Code info one can easily get them off dash n look up on Google.

[@COMPAQCOBRA]

I have volvo D13 whats best bet for me to buy?

[@gregorysummers9582]

Hello! After watching this video, I have a question about my truck. It’s a 2013 Peterbilt 384 that I purchased a year ago. It’s been in the shop since I purchased it. The dealership didn’t disclose a lot of issues that I found after taking it home. The main issue is the lights will shut off when I press the brake pedal when bobtailing and a code will flash and an alarm will sound. If I cut it off, lights may reset and work fine or they might not. Please help! Someone said the computer may need to be flashed or updated, but it’s been deleted so I can’t take it to the dealer…any help would be greatly appreciated. Good day!

[@Jeschitown]

does the bosch hd work to delete codes dd15?

[@normanjackson1895]

Can these change the max speed on a cummins?

[@haroldfamilia6037]

What about Volvo??

[@najiabdullah7881]

I have a predef 60 series Detroit which scanner would you recommend for my 2006 freightliner

[@truckingandfixing]

If you just want a simple Diagnostic tool, I think the bosch tool should work for you. Please check with OTR performance and the big boss PDI tuner to see if they compatible with your truck.

[@ThinkEagle7]

Any alternatives?

[@truckingandfixing]

I have only used these three, maybe someone else has an answer for you! Good luck!

[@ericsmith820]

Do u work on any caterpillar product

[@truckingandfixing]

Yes, I do! I currently have one in my shop right now.

[@ericsmith820]

Ok thank for the reply I’m also a ex Landstar Bco now running my own Mc looking for good honest mechanic when otr

[@truckingandfixing]

We hope to earn your business down the road! Let us know when you need help!

[@515051506969]

Where is your shop located

[@truckingandfixing]

Ravenna Ohio

[@isaacmontoya9144]

Ehat old school cat c15 ?

[@jasoncolon1329]

What about volvo

[@johncrooke7658]

Thanks

[@truckingandfixing]

Welcome

[@johnny6426]

What are the best scan tools with fault code guidance for heavy duty trucks for fleet repair shop

[@truckingandfixing]

If you have different brands trucks, I suggest OTR performance. If just one brand, go for the oem software

[@johnny6426]

@@truckingandfixing yea we do pretty much all brands from heavy duty to medium duty as long as it has good fault code guidance thats what we are looking for these after treatment codes are sometimes hard to chase

[@JayBrad_TLM]

🔥

[@ThinkEagle7]

Otr is $800 . Too expensive

[@truckingandfixing]

Make sure to use the promo code listed in the description to get $100 off. Unfortunately, I have only used these three before, I couldn’t recommend the cheaper alternative. I have been recommending OTR for every person who comes to our shop. I truly think it is like an insurance policy you purchase for the business. The forced DPF regen and live data alone can help you to get out of many bad situations as long as you learn a little about the basics of the truck. Good luck!

[@rauljuliussison5720]

Pro

[@adrianiorin8896]

You became Scotty Kilmer…what a sell out 😂

[@JKVTrucking007]

Can you review cando,