Rob's Swiss Army Knife Pedalboard - What would be on yours?

Head over to the Andertons website to find the products in the video! | tinyurl.com/27gsswfq
Electric Guitar Department | tinyurl.com/2ah7ele5
Acoustic Guitar Department | tinyurl.com/23tr727d
Bass Department | tinyurl.com/24yqm6sy
Guitar Pedal Department | tinyurl.com/287hdxhq
Amp Department | tinyurl.com/28vnqtu5
The links below may be outdated, use the links above to start browsing the website.
👆 Wherever he goes - Rob takes his road-ready pedalboard. What would be on yours? Get your hands on this board here: tinyurl.com/ycqajz8u (With the Spark power supply) or here: tinyurl.com/y98nk4qy (with the Volto Power supply).
Rob's pedalboard:
Neunaber Inspire: tinyurl.com/y8dt8oav
Neunaber Immerse: tinyurl.com/yc96udmv
BOSS TU-3W: tinyurl.com/ybdn4rmn
MXR MC401: tinyurl.com/y83cltg2
BOSS BD-2W: tinyurl.com/y7lras2s
Jim Dunlop Mini Wah: tinyurl.com/y75oqv8m
Pedaltrain Spark: tinyurl.com/yawmuvak
Pedaltrain Volto: tinyurl.com/y8u3w22e
Lee's pedalboard:
Boss TU-3: tinyurl.com/yd3legss
Thorpy FX The Dane: tinyurl.com/yb6dpxpb
Fulltone Plimsoul: tinyurl.com/yd9f2tym
MXR M169 Carbon Copy: tinyurl.com/y7qp49aa
TC Electronic Hall of Fame 2: tinyurl.com/y8ch2x3h
Interested in other Andertons KZbin channels? Click on one of these links to find out more…
Andertons Guitar & Bass KZbin Channel: goo.gl/kRJCpb
Andertons Drummers KZbin Channel: goo.gl/9yKSS9
Andertons Keyboard KZbin Channel: goo.gl/ns172M
Andertons Music Tech KZbin Channel: goo.gl/Pmy8Ao
Andertons Shopping Web Site: goo.gl/TPsG2Q
Buy a T Shirt: goo.gl/TrTe78
Make sure to subscribe to Andertons TV for more great videos like this: goo.gl/aAzyQM
#Andertons #Chappers #TheCaptain

[@elijahdidomenico5755]

expanding on the idea of selling Rob's pedal board as a package, something you could also do would be to have a 'create your own' section of the website where you could choose 4 or 5 pedals of your own taste, along with a board and power supply, and buy that all as a package at a slightly discounted rate. basically the same as what youre doing with Rob's board, but just with customizable options. just a thought!

[@djjazzyjeff1232]

That would be incredible. Have like an outline preset where it's like: Pick your Board, then have like 3 sizes of boards, small, medium, and large with like 4 6 and 8 pedals respectively or something, and then Pick Your Pedals: Drive, Effect1, Effect2, Effect3, Power Supply, etc and then have 5 or so recommended pedals for each slot. So it'd be like a PC part picker type thing except for pedal boards. That'd be incredible and I'd spend WAY too much money because of that feature lol.

[@bobbob24able]

I would buy the hell out of this.

[@trys9262]

alll they would need is a 5% discount to make that look really viable. so profits probably wouldnt be affected. if anything theyd attract more - especially if good patch leads were in it

[@darrenbatty7090]

This needs to be upvoted like Hell so it can be seen by Andertons :)

[@JustinHollandFitness]

Does any other stores do this

[@MichaelJBirch-yj1ol]

I asked the Swiss army which pedal was the Swiss army knife of pedals, but they prefer to remain neutral.

[@classicmacos1682]

Ohhh, man that was a good roast

[@ikhsanhasbi657]

lmao I was going to comment something along that line.

[@panicraptor2837]

The specs would be ridiculous. Must work at 5000 meters in -50°C as well as at sea level in +50°C. Light enough to be carried by mules and handpowered for areas without electricity. Must survive nuclear denotations and run 50 years without maintenance, because you may be stuck in a glacier for that long.

[@apfelmistnutte]

I am in the swiss army, can't confirm that. But it doesn't matter which pedal we choose, it won't work anyway ;)

[@inshoremaniyak2938]

Perfect 👌

[@TheGreensideProject]

I think that a video of Rob getting 'his' sound from a variety of high headroom amps (like the Twin mentioned in the video) would be rather entertaining.

[@JackBealeGuitar]

Yes, yes it would

[@JedNadin]

Would watch.

[@stanislavmigra]

This!

[@EzyoMusic]

Roland JC-120. That would be something.

[@Kryogenikz15]

The combination of the "Around the Globe" comment and Pete laughing in the background and yelling "it's flat" is priceless.

[@benlogan430]

No More Rob bashing. I know everyone can’t like everyone but without Rob and Lee this would not be. I enjoy the videos because of The Rob and Lee. Can’t have Chappers and the Captain without Chappers. Many more like him anyway! I don’t shred or dgent, I play blues usually in open G. But Rob is the shit (that’s a compliment) and some Shredios are good for your health.

[@pharmerdavid1432]

Rob seems like a nice guy, so I don't understand the bashing, although I don't appreciate his taste in music, which leans towards heavy-metal distorted sounds. He's obviously very intelligent, knowledgable, and funny, but not my cup of tea musically. That's not "bashing" - just saying... EDIT: I DO love his guitars though, and appreciate his obvious love of the instrument, even if he is a shredder...!

[@danteinouye6098]

@@pharmerdavid1432 That's not bashing. That's portraying your opinion, nicely and intelligently, like a good human being. Something like "rob sux can only play 2000 notes per second uhuhuhuhuhuh" would be bashing

[@DaveDexterMusic]

I just tack a sheet of A3 to the left side of the screen

[@mattgilbert7347]

The converse is also something that needs to be addressed: no more non-shredder bashing. I don't use my pinky much, can't alternate pick, and play fairly slow. "But dude, you gotta use your pinky...and how can you play without being able to pick "properly"...you just gotta believe in yourself man" Blah blah blah. I play for fun, not to prepare for an audition at the Conservatorium. And 3-finger soloists are among the greats, as are slow-blues players. Less really can be more...( *ahem* Malmsteen *cough* )

[@jimjambananaslam3596]

Chappers knows tons of theory and could probably play anything he wanted to. What he does might just sound like "shredding" to some, but it takes a lot to get to that level, it's not just playing scales and patterns fast. Nobody who can play fast is incapable of playing slow, that's just not how it works, you still need to know what notes to play to make the sounds you want to make lol. You're still fundamentally dealing with chords and keys and all that when you play metal, it's just a different style of music. You have your snobs in every genre though, so what can you do?

[@willbrock6799]

Love how that guitar Rob is playing sounds, hits me every time y’all use it in your videos. Thanks for the content!

Thanks to Lee and Rob for yet another entertaining and informative video. Rob, the action figure thing is pretty cool! Way to go! Thanks you guys (and the entire Andertons crew) for years worth of cool videos. A big hug from Brazil.

[@ryanleone3007]

More pedalboard episodes. Love this stuff. Great job guys.

[@tunaXonXtoast]

I'm so glad you introduced me to the MXR MC401. its a life saver

[@simonblide5602]

Oh man, Rob seems so excited to have a show about his board! This was fun to watch 😄

[@hearpalhere]

There were definitely some good insights in this video and I actually really like the creative use of the flat boost in the effects loop! I didn't know about the tuner in the loop either, that is smart too. Thanks for another great video guys.

[@NevuSGRock]

As an actual Swiss citizen, I would like remain neutral on whether this board genuinely bears army-knife-properties - but y‘know what yah this is pretty good!

[@jjcevallos12]

Rob looks like my dad, and is friendly the way I wish my dad was… He has a special place for me

[@coyotehollowband]

Could not agree more regarding the rotovibe. One of my favorite effects and yes it has to be the Dunlop one!

[@ZRJZZZZZ]

Rob’s discussion of the effects loop was wonderful. Thanks.

[@vorncoza]

Very keen for The Captain's board choices! Great video guys!

[@blindjohnharrison8026]

This is the best Rob has sounded ever. 10/10

[@daddio307]

I think others have said this in this thread, but a few things would be helpful. Pedal boards and what to put before what. A comparison between pedalboards and multi-effects units. Where to put the looper in the chain. Pre-amps and effects to use live with acoustic guitars. There, something to start with. Always appreciate your efforts to do what you do. 😎

[@Ejmillanv]

i don't own individual pedals, however, back in 2006 i bought a boss gt-8 pedalboard (talk about boss being everywhere in the world, i'm from Venezuela) and i have never ever felt the need to trade it/ sell it/ swap it for any other pedalboard, so versatile, so easy to use, sounds amazing and have never given me any problems, i love my boss gt-8

[@lance134679]

I do something similar to the line driver, only my pedal is an attenuator called the Signal Pad that turns the sound down for rhythm and is bypassed for leads. What's nice about the signal pad is that is requires no power, but I do have a 9V battery inside to power the LED.

[@TheR00BIN]

I would go Boss, TC, EHX and MXR only if i want to be sure that i can replace anything anywhere.

[@henryturner-ward3879]

This has got to be the best Anderton's video I've watched for a while.. :D

[@Reveltt]

I'm a rotovibe fan too! I can't wrap my head around why no one uses it. It's great. I'd buy a mini one if it sounds the same as the big one.

[@Graceharris7467]

The rotovibe is an amazing pedal! A mini rotovibe would be amazing. Rob, you are on to something.

[@RGGifford]

+1 on the Volto. Rechargeable, plus already international ready with all the adapters needed. It is what I use for my compact Swiss army travel board.

[@thehound2161]

Love pedals and hearing them in different combinations. This is a great idea and i might suggest a video per month or so where you two just come in with 5-6 pedals you want to run that day and see how it turns out. Any brand, price, type you want for the episode. Maybe themed episodes such as the 60's, 70's, 80's etc or featured boards such as fuzz, then OD, then high gain boards, clean boards with modulations, whatever. Also in the mix you have a wheel of guitars and spin it to see which guitar you run through that pedal board, that day. Thus we can maybe have a good match or even a bad match, if that is possible.

[@13StJimmy]

I love Boss and would be my first choice for a lot of things... but the neunabers are absolutely beautiful sounding machines

[@troyjeffrey4311]

TC MojoMojo, MXR Analog Chorus, MXR Carbon Copy, Electro-Harmonix Holy Grail, and Joe Bonamassa signature wah. Sorted.

[@artificialinsolence3182]

In my opinion, the most useful feature about true bypass is, that it's not interrupting your signal chain, even if they battery is drained or power supply is taken away. Especially when you're doing A/B tests or want to quickly take pedals in and out of your setup, this will save you a lot of time and nerves.

[@BV_Beve]

TU-3W - refined audio circuit with the same accuracy as the TU-3/TU-3S but the 3W has switchable buffered/true bypass :) .. but the board really needs an Ibanez MT10 Mostortion :)

[@CodyAlushin]

Tuner in the FX loop....a must try when I get home!

[@pmacfto]

Another perfect tool for this traveling, gigging, session playing is Helix or other modellers. I use HelixLT - if I turn up and it's a decent amp I can go 4CM. If it's not one I like I can go into the FX Return and model everything and finally, my most favourite option is direct to PA. We live in good times for guitar gear! Old school guys will turn up with a small board and just ask for any clean amp and off they go - sounding amazing too.

[@tylerangle1990]

Lee, I had many of the same complaints about the Carbon Copy and Hall of Fame. I went to using a Boss DD-7 and Strymon Flint instead and am much happier.

[@dexteruk150581]

Was only thinking today that I haven't seen the Captain with his sig for ages, and boom! There it is :)

[@michaelconland6345]

Interesting idea for a video. I'm not sure about selling Rob's specific choices as a bundle (maybe you'll show me up there), but having recently bought a pedal board setup from you guys, some sort of bundle for the board basics (Board, power supply and patch cables) would be super handy, particularly if that sort of tie up can get a little discount for us representing the great unwashed! If you were feeling really brave, how about a pedal board designer on the site? If the pedal dimensions are already in the spec of the pedals on the site, then you might even be able to arrange them on the board in real time. Shooting for the moon a bit, but don't ask, don't get, right?

[@filnn]

Is Baked Patatay when Pete gets higher?🤔

[@meadish]

Perchance so. More importantly, good Sir, I declare 'tis spelt 'patatae'.

[@djjazzyjeff1232]

So TLDR: I go wireless>Wah>Whammy>Fuzz>Phaser>Spark(boost)>Tuner>Delay>AMP. Which is where I get all my gain, solo/lead volume boost, and my reverb. What kinda setup do you guys use? I love talking gear. For you all that want to know in more detail, I have a Marshall JVM 210 with the 4 way footswitch, 3 clean and 3 gain channels, it has 2 master volumes, so I set one slightly higher than the other and that's my version of Rob's line level solo boost, and it also has built in reverb so I don't need a pedal there either, so, on my actual board, I have a 2 tier leveled board, and under the higher tier I have tucked my Sennheiser G3 wireless receiver, and my voodoo labs pedal power, into my Red Fasel (smoother sounding) Crybaby, into my digitech whammy/detuner combo pedal, into an old iStomp which is have set to fuzz(it actually sounds incredible), another old iStomp set to phaser, a TC Spark for a little more top end and a touch more gain to fill in the gap between the JVM's green and orange gain channel, into Boss TU3 tuner, into a Carbon Copy at the end, which actually does go into the front of the amp, and I don't have anything going into my FX loop because I don't want to deal with 2 more sets of 30ft cables just for 1 pedal (which I very rarely use.) I already have 2, one goes into the front of the amp and one for the footswitch, and then power for the pedalpower (obviously.)

[@Ganlorth]

They have auready happened! it was awesome being apart of the Canberra clinic! \m/,

[@garrettodonnell4177]

Kaffir Lime > Sweet Cream > Angel Wing > Doom Stick > Dispatch Master > Purple Plexi > MIKU

[@willgoodfellow3144]

Idea for a blindfold test- see if Rob can tell the difference between 3 or 4 boss pedals and their WAZA counterparts

[@mickhaslam2985]

With Christmas on the horizon do a video for 'Best pedals for £75'

[@TheJaysimus]

I'd say under £100 Gives us more of a selection, and lets Lee show off the best of the more affordable pedals...remember the guy needs to shift stock Also, it allows more EHX pedals to be thrown in, and I'm totally biased in their favour 😂😂😂😂😂😂

[@seamasrigh2162]

40 years ago I had an MXR Distortion pedal and a Morley Volume/Phase pedal. I still have that Morley.

[@RabidWookies]

Damn! I can’t believe you were in Fountain Valley, CA and I missed it Chappers! I wish I had known!

[@matrixugly]

"I just hope the globe feels ok after its circumnavigation" omg... +1 Lee.

[@chrissoares23]

Did Lee drink his coffee through the lav mic at the beginning? Sounded like it. :)

[@bisheshpradhan5674]

Can’t wait for Rob to come to Australia.

[@bavarianbanshee]

I definitely hope to see a video on Lee's complete pedalboard!

[@thedondeluxe6941]

I also love the Rotovibe!

[@naturalmeditation101]

The rotovibe does sound great, I'd love one

[@Jeepjones85]

I love the roto vibe

[@JeeWeeDonkers]

I specifically bought a TC polytune 3 tuner with the buffer in it, to compensate for the bad buffer in my Ibanez WH10 wah. With the tuner in front of it, I am retaining all my highs.

[@gordontubbs]

My swiss army knife pedalboard happens to be BOSS. It's a BOSS BCB-30 case with (from left to right): NS-2 Noise Suppressor, GE-7 Equalizer, and TU-2 Tuner. But on the other hand, my go-to one pedal to rule them all is the Behringer Vintage Tube Monster, because it can function as a color booster/EQ, overdrive, and distortion; and it also has a built-in noise suppressor.

[@natskis]

Me watching this video during lockdown in Australia having missed the clinic by... 2 whole years :)

[@gyrosphinx]

Currently my pedalboard holds... a THUNDERCLAW! And that is all I need.

[@ResoBridge]

Hmm well the BOSS TU3 Wazacraft has 'refined' audio circuits. All that really seems to mean is that you have the option of switching between buffered or true bypass. I do wonder whether that means the switching itself is still achieved 'electronically'.

[@seanknot]

Lol was about to ask about the melbourne clinic as that message popped up CHEERS

[@ShredShed]

Not usually a fan of Wah, but what rob does at 25.55 sounds sick

[@guitarhiker4449]

Please bring back the mythos rob chapman titan pedal !! I missed out on purchasing one !! Thanks guys nice setups!!

[@siddharthsharma1526]

Rotovbes are fantastic, would love to see a mini version myself

[@michaelangeloh.5383]

Captain Anderton; There's actually a "Bright" version of the Carbon Copy. - I guess it would be perfect for the issue you have with it. But there are lots of other ones as well.

[@greenwave792]

awesome mate

[@djklinger1627]

A good swiss army pedal is the hotone tuner which can mute, cut or boost. I use mine mostly as a cut to take a crunchy amp to clean .... and most of the time i don't really bother with muting it when i tune. The boost is decent as well.

[@nitegoat1369]

I bought the bulk of my gear from the La Mesa, CA GC. Nxet time you're in La Mesa, stop by my luthier's -Top Gear Pro Shop, on University Ave, where I have had all of my guitars properly setup and worked on. They are masters of their craft. I no longer live in California, since I moved back to my hometown of Detroit, Michigan. I have yet to find a luthier/tech here. I feel like I'd be cheating on Top Gear.

[@chupavi_ch]

You MUST play jam at the start of video!! Because you have best jams on youtube!!

[@nitegoat1369]

Hey Lee, try out an EHX Holy Grail Nano or Holy Grail Neo. I run both on my pedalboard. I use the Nano for its Spring reverb, and the Neo for it's Plate reverb. They're also small and inexpensive. I also run two different delays; a Carbon Copy and a Boss DD-3. It's really the best of both worlds.

[@JoeyC4D]

I like waiting to doa jam a bit later once we know what your two are jaming with :)

[@marc_leblanc]

It's funny, I started with all Boss pedals. You can get great tones out of them.

[@jmwicked]

My go-to-anywhere pedal board : Line6 M13... perhaps with a wah

[@jamiemacmillan4056]

If I'm using an amp I'm happy with the gain channel on (it's something I'm rather picky about) and there's a clean channel then a dunlop wah (preferably JP sig though I'm running a slash wah rn) a clean boost pedal and an eq pedal to boost mids for leads, a chorus (a boss CH-1 is really all I need for that) a digital delay and if I'm not happy with the amp's gain channel then a tc electronic fangs for my gain

[@IanOPadrick]

My board runs like this (in order from guitar to amp): Guitar into Purple Haze, into Danelectro French Toast, into Cry Baby, into Behringer Overdrive, into Behringer Vintage Phaser, into a Boosta Grande, into Behringer Delay, into my amp(s). I have the delay last because it has two outputs, and I sometimes run two amps/an amp and one to a soundboard.

[@michaelangeloh.5383]

I love the RotoVibe aswell, but I'm just gonna get a stomp-pedal with the effect.

[@mattrussell106]

Danish Pete laughs at all the circumnavigation jokes, but not at Rob's comedy masterpiece: "But what if they've only got a Fender Twin?" "Then I would run that Twin loud so it crunches". Good work.

[@BathedInMilk]

Have always wanted a RotoVibe. Would buy one tomorrow. £250? Well out of my price range for a pedal. As such if a mini came out, sounded as good and was half the price = sold.

[@rowlandstraylight]

I'm using a regular Boss TU-3 specifically because if i don't have a somewhere between the guitar and amp when I've got a handful of true bypass pedals and a long cable run it sounds awful with them all off. But in Rob's case the blues driver does the buffering so its not needed. And you probably don't need a buffer in the loop unless you're doing something really strange.

[@tinyj4520]

Boss Blues Driver (my secret weapon) > Dunlop 535q wah > Golden Plexi > Danelectro FAB Chorus > Boss DD7 > Mimiq > Stereo Reverb of your choice. Add your favorite effects after the Fab chorus.

[@explode4]

Dunlop makes the uni-vibe pedal, which has an expression out, which I assume works with their mini expression pedal. Go on that pedal show and get sorted out!

[@stephenjames4937]

I couldn't agree more about Boss: they ought to make a RotoVibe pedal. A real RotoVibe will put me back more than two hundred quid.

[@N00dleBandit]

Dunlop has fantastic rotovibe pedal

[@larrydj549]

I was waiting outside with the crowd while Steve was doing his soundcheck at a smaller venue and he almost blew the walls down playing Gravity Storm so loud

[@TheJMan1K]

Ibanez/Maxon, MXR, and Boss can be found at pretty much any music shop

[@JDODify]

My board is tuner>TubeScreamer > OCD>boss super chorus>tone city phaser>FX Loop>Mooer Echolizer >HoF The Echolizer is a bit shit, I’d like a nicer delay. I wouldn’t mind a better phaser too, although the Tone City Summer Orange is pretty good and it was really cheap.

[@tolvajakos]

yeah, I'd take Lee's board any day. gotta get my hands on a plimsoul

[@nelsonward7981]

Outlaw Iron Horse Tuner/Power Supply, Wampler mini Tumnus, ProCo Rat, Ibanez GE9 Graphic EQ, Ibanez mini chorus, MXR Carbon Copy Delay, TC Electronic Hall of Fame Reverb.

[@mrakk]

To answer the question of why one would use Boss TU-3w instead of buffered one is exactly that - the buffer. But not because you want to be a True Bypass Warrior, but because of some fuzz pedals (and as we know all you need is fuzz). Typical place for fuzz is at the beginning of the chain. Some older (or "truly" based on old) fuzzes don't like buffers. In fact some boosts as well. And if you have a buffer before one, it messes the sound completely. Since the tuner usually is in the front of the chain you want a true bypass tuner in front of that (if you're not using it in the loop like Rob does). I really like TU-3 and also have a pedal 60s fuzz face that doesn't like buffers. That's why I use Boss Waza tuner and than the fuzz. And just to be clear - after two other fuzzes, I have a standalone buffer pedal to power up the rest of my pedalboard. So yes, buffers are great - just not in front of every pedal :)

[@ontheroad579]

The Waza is just too expensive for what it is.

[@bdhere1]

Looking forward to the captain's board

[@isaiahfurrow7414]

Has Lee come up with his pedalboard yet? I'm still deciding between a tuner, and 4-6 pedals, OR a a multi-FX.... I think my board would be similar to Lee's board here, but with a different selection of drives...

[@martrich1098]

If you want to buy a good drive & boost combined would it be The Dane or the D&M Drive? I think they are quite similar.

[@Nightdare]

My pedalboard is a Voodoo Labs Ground Control, MIDI really made my life a lot more comfortable

[@joaofrancisco1760]

Rob & Captain Clinic???? Now that's what i'm talking about!!

[@KsiazeIgor]

Just realised the S letter in your Andertons logotype is actually stylised on the 8th note :O

[@TheJoepiedoedel]

this video was a mess, and i love it, more pls

[@robertogrady2798]

19.55 bring on the Mini RotoVibe 👍💪🤘

[@stevebees3992]

I'm pretty sure that you can run the Volto with the charging cable plugged in if you haven't charged it, whereas a lot of rechargeable supplies don't allow you to do this.

[@ryanspencerlauderdale687]

I would have a Walrus Audio Deep Six, a Paul Cochrane Timmy, a Mad Professor Little Green Wonder, a TC Flashback 2 with tap tempo, and a Strymon BlueSky. Pretty sure all those could fit on one of those Pedaltrain NANO+ boards. I would power it with one of the new Strymon Ojai R30s, and use Evidence Audio patch cables.

[@AshanXguitarist]

I've never really explored the effects loop portion of my amp and always tossed my pedalboard in the front. I should try the effects loop sometimes just to see how much different it really is.

[@flok2929]

just a question maybe someone can / could answer: whats this amp head ( I think it is one ) sitting on top of that Victory head behind Lee? In the middle there's a H&K, but beside it... anyone knows? If have seen it now for a couple of videos sitting there on top and it makes me curious. Thanks for any input

[@mitchinatr7093]

TU3, OD2, EHX Eddy, Keeley Caverns, with a Vox Wah thrown in if I’m feeling frisky.

[@Yupppi]

I'd absolutely want a buffered tuner if my first od pedal doesn't have a buffer (which I assume bluesdriver does since it's a boss pedal). Buffer in the first pedal saves your signal from guitar after that long cable. And the word is that Boss pedals have a great buffer. Totally did not learn this from That Pedal Show TM. People are absolutelt sleeping on rotovibe sounds because they're not familiar and don't really know what it is, who uses it and how. People like Chappers and Dan and Mick know how sweet it can be, but average player would ask "what is that and why would I need that instead of million other modulations". But the more you listen to good vibes, the more you enjoy them.

[@reddrumstick11]

I was quite disappointed due to the lack of Miku....😂😂

[@mikeboxler759]

I know this has nothing to do with this video, but what do you guys think of the Nu-x mighy lite as an affordable alternative to the Katana Air? Would you review it?

[@joeybusnardo5866]

(Unrelated to video) - Do any of you guys know if there's some strats with a dark cherry burst flame maple top just like the select series? Cuz they're just stunning!