Easy Wood Finish - Secrets to a PERFECT Finish

[@justincottingham3969]

Rob pulling out the secret drawer at 3:45 is KZbin gold.

[@TomGlander]

Caught that... slick!

[@arlenestanton9955]

He was proud of that draw, and wanted us to see it!

[@james.tupper]

power move right there

[@nickb_rock]

That was a nice flex at @3:50 lol

[@ashgiles4401]

I noted that. Hahah

[@TakamiWoodshop]

Rob scooping up wood shavings at 5:32 is KZbin gold. 😉

[@davidhartshorn1763]

I have been studying finishes for 30 years lacquer is the best

[@imonitie]

Hey Rob just wanted to say thank you for the Canadian pure maple syrup you sent Along with your chisel mallet as a complimentary gift. It really came in handy with my eggo waffles this morning when we realized we were out syrup. Lol. Little things like this make a difference in someones day and I couldn’t go on without finding a KZbin video to comment under and just let you know the impact of your thoughtfulness and consideration. Build something great today! Cheers xo #itsBebushka

[@MrPJM22]

Love the simple turntable. For those of us who don’t want to take the step to cut a circle, a square works just as well.

[@byjohn1402]

I cant help but think the little brads might scratch the surface of your piece. I cut some pyramid shaped blocks and put some Bondic at the peaks to soften the tips, so as not to scratch anything.

[@TimH86]

Funny, just thought & did the same thing when I made it.. saves some time!

[@darodes]

My man Rob Cosman probably has 60-grit fingertips 😂 Thanks for the info! Much needed!

[@bartsolari5035]

You reminded me...Deft is a very good product. Used some recently (brushing) goes on great AND no brush drag. A tad bit more workable.

[@andresfelipemoscosohernand2371]

Rob just did a graphic definition of hand sanding. Literally lol Great video. Thank you much.

[@landoncarter6452]

I've been searching a lot for a tutorial on how to use spray lacquer. I finally found it. Thank you.

[@georgeperentesis7083]

Hello Rob, Deft makes a satin finish, been using it for years, also in spray. I also use 4- 000 steel wool after my 2 nd coat, then third coat. love it on cherry, just a thought. Your content is great, thank you....g.

[@MC-vv7us]

Hi Rob, Mike from the UK here. Another product thats great for a gloss finish, gloss and water resistant is car body clearcoat.

[@bw162]

Just came across your channel and enjoyed the content and style. Kudos. I’ve subscribed.

[@Borescoped]

I’m glad you made this video! Thanks Rob!

[@RobCosmanWoodworking]

I am glad you watched it !

[@ashgiles4401]

Im in South Australia. I wish we had maple!

[@howardhardy1992]

I enjoyed the video. I have been spraying lacquer for about 40 years. Mostly on large projects in a spray booth using an HVLP set up. Occasionally on the job site for certain types of built in things that couldn't be finished in the shop. Gotta be real careful with that so you dont blow yourself up. But thats a complete other subject. I am now retired and making a lot of small stuff so the spray cans are extremely easy and handy. I had not even thought about the turntable set up. Ill be making one soon. Even us old dogs can learn new tricks. I also like Shellac for finishing.

[@felipehuibonhoa7338]

Yes Rob! We love your style of teaching. Very informative and whole. It gives me confidence to try it. Thank you very much.

[@RobCosmanWoodworking]

thanks for watching and commenting

[@Blueridgedog]

Ah...the real smell of wood working from the 70's. I sprayed a lot of lacquer back then making cabinets in Orlando and New York. Thanks for reminding folks that it is still the go-to finish for speed and outcome. Thanks too for the syrup you sent with my saw.

[@RobCosmanWoodworking]

careful, the syrup is addicting!

[@Blueridgedog]

@@RobCosmanWoodworking I have used it for some time in a few specialty BBQ sauces that I make. Love it.

[@RobCosmanWoodworking]

Ummmm sounds yummy

[@kingofcastlechaos]

If I want a satin finish, I spray high gloss all the way to the last coat, and that one I spray Satin. Really makes the depth show. I also use brown paper bags for my "sandpaper" to flatten lacquer. I have fun watching your stuff. Thanks.

[@ed-gw3ov]

I agree with the brown paper bags for my "sandpaper". Never would have believed it until I tried it...

[@LogHouseFarm]

I love that little turn-table! As always, great information and well delivered.

[@RobCosmanWoodworking]

easy to build, works great

[@androidgameplays4every13]

Of course I like your work and your style of teaching!

[@RobCosmanWoodworking]

Thanks

[@cxyc9479]

Thanks Rob. Got help.

[@MegaWeagle]

Very well done! I just recently discovered laquer from that Katz Moses guy. I must say I’m happy you did a video as well, definitely picked up some things to make what I was already doing better!

[@peterjames2580]

Been using Deft for guitar repair for years great stuff! Thanks I learned a lot!

[@williamhanna5224]

Awesome video Great work !

[@MANJITSINGH-ko2oi]

I LOVE ur home made sanding blocks.

[@RobCosmanWoodworking]

Easy to do

[@MANJITSINGH-ko2oi]

@@RobCosmanWoodworking thank u

[@grahammewburn]

Thank you Rob. I don't think I've ever learnt so much from a single video. Cheers Gray

[@RobCosmanWoodworking]

Wow.....Thanks.

[@grahammewburn]

@@RobCosmanWoodworking I live on a yacht. A Hartley 34 Ferrocement. Inside is lots of woodwork. So watching you should help me do a better job of additions etc. Cheers Gray Logan river Queensland Australia

[@kenstewart687]

Great quick turn table. I have used the hand sanding before and also like to use a brown paper shopping bag.

[@Borescoped]

I hope we might see in the future another video covering the Tung oil tips and tricks... and safety. I really liked how you talked about safety for the spray varnish. I suppose though that getting a quality respirator right now is on par with getting a brand new Lie Nielsen skew block plane though LOL, almost impossible.

[@RobCosmanWoodworking]

I will tel COL Luther to put it on the list

[@garrettd4820]

Thanks rob!

[@RobCosmanWoodworking]

You bet

[@Ammed_KN6STX]

Great video👉🏻👍🏻👈🏻

[@RobCosmanWoodworking]

Of course it is , Luther produced it!

[@RobCosmanWoodworking]

Because luther produced it!

[@RobCosmanWoodworking]

thIs message approved by Luther.

[@billmellon3517]

Thanks Rob, always great information. I have a small basement shop so spraying is an issue with fumes so my go to finish is shellac and I’ve always had good results. Sometimes I do use a final coat of lacquer. I use sanding blocks with self adhesive cork which has enough give for delicate sanding operations. Thanks again for the help for us hobbyist woodworkers! Bill Mellon, Cross Plains, WI

[@andrewbrown8148]

Great info, Rob~! I too like using Deft products. Great finish.

[@RobCosmanWoodworking]

None bettter

[@juancamore05]

Hi Rob, thanks for the video. I will definitely be implementing these tips. Just as a side note I believe the term is High Volume, low Pressure. Not velocity. Once again, thanks for all you do!

[@RobCosmanWoodworking]

Yes you ate correct

[@fredhermann9717]

It is the little gems that are great. For example finish your stroke before the half way point of the block. Simple but really helpful. Do you not use a tack cloth to remove sanding dust?

[@gregmislick1117]

The Home-made lazy Susan / Cake Decorating Stand is cool - I've made a pair of boards with 1" grid drawn on it and 1-1/4" dry wall screws driven through from back side... doesn't spin though, but boy, those screws have hard sharp points - I use it for painting on water based Poly, coats of tongue oil etc I think that I'm going to add the spin feature !!

[@breyerssdb]

Where is Deft available in Canada?

[@ThatNinja1]

Love these jewels of info you give us Rob. Thank you

[@RobCosmanWoodworking]

keep watching and I will keep posting

[@gabrysgabriukas]

Hi, thanks for great tutorial but I could not find deft spray lacquer in Europe anyone knows where to buy it? or any alternative?

[@MikeyDonna]

I have used Deft for years as well. Have you ever used steel wool to knock the gloss down. . Mike

[@davidbundesen5867]

I was using Deft decades ago. I’m glad to see it’s still a great product.

[@kingofcastlechaos]

I just found a can that is about 20 yrs old I guess, and it worked after 30 min of shaking. REALLY surprised it turned out well!

[@claudemireault5699]

Sir. I have a question regarding finishing. Just how safe would it be to use shellac ( for food and drink ) as a finishing on say a wooden plate, drinking mugs, ect ect. The same question would apply to epoxy and dyes that is used a lot in decorating bowls. Thanking you in advance for your help.

[@lessnyder6245]

Hi Rob, I used carpet tack strips for my turntable which I use to finish signs. Makes it convenient when I need the turntable without nails. I always enjoy your content and even though I've been doing woodworking and finishing all my life (I actually started out as a finisher for Sears), I always learn something from your videos. Thanks Rob!

[@lessnyder6245]

also love your military patches, I am a Vietnam vet was in the Army's 101st Airborne div.

[@billboy7390]

Very nice look, lacquer really brings out the color. I used deft lacquer finish for years And found it did not hold up well in the dry Arizona climate. I have since switched to Mohawk lacquer exclusively. Many more choices in sheen. Dead flat to high gloss. Catalyzed and pre-catalyzed readily available in both spray can and by the can for a spray gun. It is available in Canada, give it a try. Just as easy as a deft to spray.

[@Exodus5K]

I literally just bought a rattle can of the Satin Deft Lacquer to test it as a finish before I build a cherry shaker side table. This video could not have come at a better time.

[@Exodus5K]

@1 New Notification Yes, Rob's in Canada though, I got it from a local hardware store that I'm sure doesn't exist where he's from. The product exists though, I'm sure he could order it off of Amazon

[@kevinkolpatzeck5998]

Thanks for the super instructive video Rob! You keep helping me take my woodworking to the next level! I've been using Danish Oil on pretty much every project recently (occasionally I've been using dewaxed shellac for the insides of boxes) and I've always been happy with the finish I get. But I've had many sleepless nights over using oil on projects with lots of inside corners. Especially frame and (veneered) panel constructions can be a pain with oil puddling in the edges. I'll definitely give spray finishing a shot now! You always manage to convince me to dare and try something new.

[@RobCosmanWoodworking]

I think you will be very happy with spray lacquer.

[@jimmykramer6839]

Does lacquer cause a yellowing effect on wood over time or does it stay clear. I've been use crystal clear poly for my projects. Thanks for all the information.

[@MANJITSINGH-ko2oi]

HI rob super simple turn table. thanks.

[@RobCosmanWoodworking]

Glad you liked it

[@MANJITSINGH-ko2oi]

@@RobCosmanWoodworking I will make one as I always struggle holding to put on seal and polishes

[@TWC6724]

I love Deft lacquer! I use it a lot. They do make Satin. Thats the one I buy. The sheen is perfect. Not too glossy and not matte.

[@RobCosmanWoodworking]

Really, I have never found it where I buy it in the states

[@jessenunes4327]

I just used that same product on my last project and I was impressed by the results . Thanks for the tips .

[@robstephens]

I'll have to try Deft lacquer. I like to "sand" between coats using strips of paper cut from a brown paper bag. It quickly removes the slight roughness.

[@RobCosmanWoodworking]

i will try that and see if it works for me

[@dkbuilds]

And a second question: why don't you finish the inside of the box? Anyway again this video was super useful, learned a lot!

[@RobCosmanWoodworking]

because I like the look and feel of natural wood. the inside doesn't need protecting like the outside. but i doo finish the inside of the lid to prevent warping

[@dkbuilds]

@@RobCosmanWoodworking Thank you for the reply! Makes sense. I didn't know if the inside of the box needed to be finished to prevent warping of the walls of the box... I guess it doesn't! I'm going to stop finishing the insides of my boxes now!

[@91wheelz]

Hey Rob, I hope this comment finds you. I respect your work and opinions greatly. I've been flirting with woodworking for over a year now but have come to a question about wood finishes. I want to make wood coasters but have gone back and forth on what to finish them with as to help resist water/liquid etc. I seem to have gathered that shellac probably isn't the best finish for a wood coaster so from there I did more research and found out about Deft spray lacquer and wipe on poly. In your opinion, what finish would be best for wood coasters?

[@utube1818]

Shellac is the worst choice for coaters so your right not to use it. If you can find it in the US the either a two pack Acid Catalyst Lacquer, or a 2 pack Polyurethane. Both need to be used in a very well vented area especially the PU.

[@dannybrand5045]

Thank you Awesome great Info:

[@twelthstring]

Which lacquer/varnish is finger grease resistant? By the way, Ikea has a turntable (without nails) called Snudda.

[@blessedhopebaptistchurch6713]

Hi Rob, I know finishing this box and other things I've seen you do you never use any stains just the natural wood, which are beautiful. But if you use a (plain wood) like pine and you wanted some color to it, can you still use the lacquer and have the same finish?

[@TheVimeo]

Rob, if you have time to answer this will be amazing, otherwise I love your videos and php. For outside furniture, that will stay in rain, wind and sun(amazing weather in Berlin, Germany), what do you recommend?

[@RobCosmanWoodworking]

Well your first strategy should be wood selection. Choose a wood that does better outside(teak, redwood, larch, etc). Outside, exposed to the elements nothing is perfect, you will always have to maintain the finish. I would go with Spar Varnish or any other varnish made for the wooden boat industry. I love Berlin by the way. My favorite is Christmas time, Chuz

[@edcrego396]

On larger jobs tables dresser does your choice change with the size of the project do you us a spray gun I also us deft I really like it and as you you said the nozzle is alsom but deft doesn't sell a sprayable product for a spray gun I wish they did but never less there rattle can in my opinion are the best on the market,I would like to see a video from you about using a spray gun and in your opinion which is the best way to go on larger pieces I know type of wood play into a decision also thanks

[@richardgoebel226]

Finish is the make or break. So very true. I tell people that the last thing I do is the first thing they see. The finish! If the finish is so what then that is how the box is seen no matter how good the quality of your woodworking skills. And with little boxes they are held up close for intimate inspection not like table legs.

[@RobCosmanWoodworking]

I couldn't have said it better

[@bobbenzuly7893]

I agree about the finish being the make/break point. My problem is the step before the finish - planing or sanding. How to make sure everything is ready for finish? Most times it looks right to me in low angle light, feels right, etc. But, once I apply stain I find all of my "misses". Any suggestions how to improve this?

[@richardgoebel226]

@@bobbenzuly7893 If I am using an oil based product I clean off the dust then wipe the wood down with mineral spirits. It darkens the wood like an oil finish but does evaporate after 5 or 10 minutes. That gives me plenty of time to scrutinize and see all the little scratches, dots of glue, etc.

[@canedobrazil3209]

Thanks tô BRAZIL you vídeo...

[@RobCosmanWoodworking]

thank you for watching

[@johnweeks5304]

Rob - In several videos I've seen you plaining off pencil marks. I was told that rubbing alcohol and a paper towel takes it right off - It's always worked good for me. Something I'm missing?

[@williamhanna5224]

Use piece of paper bag to take dust off in between coats works great and keeps the oil from your hands off the finish

[@mchristopher]

Hi Rob. Can you apply the Deft over an oil finish? Specifically I’ve applied 2 coats of Maloof oil/poly blend. Equal parts BLO, Tung Oil and Polyurethane. I’d like to add some more protection from the Deft. Thank you!

[@Henry.Bendik]

Is there anywhere in Canada that Deft products are available?

[@RobCosmanWoodworking]

Don’t think so, we have always had to order from the US

[@andrewklug4845]

Terrific video. I enjoy coming home to these at the end of the day. I am curious to know which Tung oil product is your favourite.

[@RobCosmanWoodworking]

circa 1850 tung oil finish is my favorite

[@daviddeitrick9929]

Thanks for the info. I have one question: Does the lid ever stick to the bottom with this process?

[@smithvader82]

That simple turntable out of a screw is genius. By the way, I haven't given up bugging you for the aprons to be released for sale. Still waiting for the sold out to go away...

[@RobCosmanWoodworking]

The manufacturer of our new aprons has 100 made. we are waiting for them to finish up. I think we will have them on the site in October.

[@tomsatterlee8397]

Great looking box. One of the comments says he watched you make it. Do you have a link to that video. Also, did you rub out the lacquer after the final finish. Thanks

[@user-nx1rg9tn7z]

you can find some videos by searching "Rob Cosman Box" hope it helps

[@davidpalmer5166]

I switched over to General Finishes water borne high performance. Does it melt the dust like nitrocellulose lacquer. Is the Deft in the can a water borne finish. What do you think about the GF high performence product?

[@danieldibiaso9342]

Hey Rob love your video. Even though your turn table used 23 gauge pin nails don’t they leave small dimples on bottom when you turn box over to spray the top.

[@RobCosmanWoodworking]

Nope, that is why i use the small ones.

[@chashint1]

I have tried various nails as standoffs with mostly unsatisfactory results. Always tried going bigger and blunter to reduce marring vs tiny and sharper. I have been looking for an excuse to get a 23 gauge nailer. Thanks for the tips Rob.

[@sueb4154]

Hi Rob, by "highly explosive", would you think it best to locate your finish, in a location that is not attached to your home? I always figured that an HVLP sprayer would blow small items away. The Deft spray can seems a great option. I imagine a future video will be on the HVLP sprayer, when the standing desk comes to completion. I would like to know if there is a huge difference between the spray guns. There are so many out there, at a great range of prices. I have learned SO much from your video teachings. Thank you!

[@RobCosmanWoodworking]

You are correct, we are doing one on how to HVLP. I cant give a HVLP sprayer recommendation as I have been using the same brand for 30 years and they went out of business and I have a spare sprayer do I will never need an different brand. If possible I would try not to do large spraying (e.g. with HVLP in your house, Do it outside in a temp spray tent if you dont have another option

[@dkbuilds]

Thanks for the video Rob! Could you share what respirator you use? I feel mine is great for dust but it's not cutting it with lacquer fumes.

[@rjsenn4142]

I have been using the 3m 7502 with the 60923 3m organic vapor cartridges. Works great for spraying. Just make sure your mask is the proper size to get the correct seal on your face.

[@RobCosmanWoodworking]

I use an integra mask i got from Woodcraft. My model is no longer avaliable

[@dkbuilds]

@@RobCosmanWoodworking Thanks for the reply!

[@Keth.S]

Hi Rob, good, well explained, informative video. I have a question to ask, would/have your ever firstly apply your oil finish, then after roughly 2-3 coats, spray lacquer over it. I tried once on a natural edge bowl and loved the result. Just wondering if you have ever tried it or if there's any flaws which would helpful. Thanks

[@RobCosmanWoodworking]

You know i have never done that but its a good idea. I will try it and report on it in my next finishing video. Good idea, thanks

[@dscritter614]

Thx Rob. I guess I don't spray it full on enuff, b/c I don't c any difference whatsoever. I'm going 2 give it another try.

[@utube1818]

I noticed you were using sand paper between coats.....what no scrapper?

[@VinceEspositoJr]

New to the channel...Very helpful video. Do you ever use a tack cloth? Do they leave a residue? Thanks.

[@RobCosmanWoodworking]

not anymore. Found they do leave a residue. Compressed air does the job. Did you subscribe yet? Welcome.

[@VinceEspositoJr]

@@RobCosmanWoodworking Sure did. I'm just getting back into woodworking at 61. Your level of craftsmanship is a hard act to follow. My issue is having enough time to practice and develop my skills with a full time job. Just starting to get the shop reorganized. I very much appreciate all the time you put in on the vids and instruction.

[@gregmarquis1886]

what about sanding again after the third coat and putting paste wax?

[@RobCosmanWoodworking]

You could, i prefer lacquer over wax as my last coat

[@scullerlmt]

Love the turn table. As a chemist as well, you don't want to be rubbing with any part of your hands. You will be pushing body oil into the wood/finish and that body oil is a .... release agent. Avoid body contact for a great finish. I'm also a huge fan of Deft. I've used it for over 40 years.

[@vane5736]

Help guys. I have a flea market plane iron. I flattened the back and used a honing guide on some 150 grit sandpaper to prepare the iron for honing. I was doing that and used two sheets of sand paper and for the life of me can't get a burr on the back. I thought ok maybe I just can't see it but after running it on my 400 grit water stone for a few minutes, still no burr. They take off material but there is no burr on the back and the iron doesn't feel any sharper.

[@michaelshick4612]

Hi Rob, what are your thoughts on 4 (0) steel wool ? Between coats.

[@RobCosmanWoodworking]

I prefer scraping or sanding

[@adrianuselvers5284]

I was told steel wool fibers could get stuck on the wood and stay there. As it’s “steel” it will rust over time and you will definitely see it. It makes perfect sense hence I never tried it.

[@prozack1312]

How do you feel about lacquer vs polyurethane?

[@RobCosmanWoodworking]

I prefer lacquer because it dries so fast. Poly is good if you must have water protection

[@norm_olsen]

Nice video! We need more complete finishing solutions! I do wonder if there is anything other than finishing nails that could be used to prop the box up for spraying. Overall though, very informative (as usual)! I'll have to look into the Deft spray cans! For removing spray nibs, would soapy water sprayed into #0000 super fine steel wool do the trick?

[@RobCosmanWoodworking]

#0000 dry would work, I like a more aggressive material than 0000 so I use either sand paper or I scrape the surface with a scraper

[@bd3846]

Terrific video. Out of curiosity (I've been wanting to move to spray lacquers for a while) what is your preferred lacquer for HPLV? Thanks

[@RobCosmanWoodworking]

Thats our next video.....stay tuned

[@RandomProjects2112]

Hi Rob, where do you buy Deft? I live in Ontario and can’t find anyone who sells it.

[@RobCosmanWoodworking]

i buy it in the States at Rockler stores

[@jakeo2600]

@@RobCosmanWoodworking Amazon has all 3 types of Deft

[@jeffdutton1910]

@@jakeo2600 I looked for it on Amazon.ca as well...at nearly $50 for a 12 oz. tin it should apply itself and sand itself between coats as well. (I'm in Ontario too...in the GTA)

[@jeffdutton1910]

Exotic Woods in Burlington has it in a brush-on form...not sure how well it would work in a sprayer, but here's a link: exotic-woods.com/products/finishes/deft-brushing-lacquer-gloss

[@jakeo2600]

@@jeffdutton1910 Just this past week I needed some spray lacquer. Amazon listed Deft for roughly $15.00 for a 12 oz can. I decided that a can of Rustoleum that sells for $4.27 at Menards would suit my needs just fine. I'm in Illinois.

[@MrAtfenn]

i have a few questions if you will bear with me please. if i wanted to have the protection of the lacquer with the color and depth of an oil finish would the spray adhere to the oil? if i understood you correctly, you said that you sanded this box rather than plane it. why did you make that choice? as you said the deft lacquer is not very water resistant. do you have a similar spray recommendation that is more water resistant? and finally, as you did not finish the insides of the box other than the lid, if i understand correctly, the outside and inside will absorb and release moisture at different rates. can you get away with this simply due to the small size of the box or is this not as important as i have understood it to be? thank you for your time and patience with me. i think we all very much appreciate that you take the time to answer our questions or simply respond when others do not. i believe that feed back is one of the many reasons that you are the best woodworking coach online.

[@RobCosmanWoodworking]

1) I always plane the lid. But on smaller boxes its quicker if I just go over to my big orbital sander and giv it a quick sanding on the sides. for bigger boxes I plane them 100% 2) well I ONLY use lacquer and Tung oil. If it was going to get wet guess I would recommend polyurethane 3) I finish the underside of the lid for that very reason. The sides of the box are held together very securely with strong joint that will resist and prevent warping form uneven moisture caused by finishing only on ones side, trust me I have been doing it for 30 years.

[@RobCosmanWoodworking]

I have never sprayed lacquer over dried oil, i would think it would stick, assuming it is really dried. I will try it and report on the results in my next finishing video

[@robertcraigh73]

Would a belt sander with some 36 grit be a little faster for sanding between coats? EDIT: I'm kidding.

[@JeremyB8419]

I built some “unit blocks” for my friends son and used tung oil. Went over last month and saw a bunch of them left outside with major splits. Was pretty annoyed by it. Didn’t expect someone to leave something I spent so much time on just straight up outside in the sun and rain.

[@RobCosmanWoodworking]

No more projects for him!!!!!

[@scrapper666]

The V in HVLP is volume, not velocity.

[@RobCosmanWoodworking]

Yep, my bad.

[@24.k.g.f.97]

Pulls out flawless cherry drawer that's so smooth its invisible. Anyway. Hahahaha

[@johnmitchell3749]

Your films are great, but I'm finding it hard to go along with those little ' finish nails' propping up a newly sprayed piece and leaving no marks. Keep safe, best regards.

[@Realism91]

Same name as my dad, strange.

[@The_Conqueeftador]

He says 10 minutes and 400 grit. Another guy says wait 24 hours between coats and 0000 steel wool. I'm very confused. 24 is a big deal and time wait. Which is more accurate?

[@utube1818]

Drying time depends on the type of lacquer your using and room temperature, at 70 Fahrenheit + most base coats will dry and are sandable within the hour, top coats between 2-4 hours, Once I finish one side I always leave it over night before finishing the other side. As for sanding steel wool will only dull the finish it will not flat or de-nib. Use sand paper anything from 320 grit upwards.

[@harleywood9588]

Acupuncture on the cheap

[@raffyzoo2130]

3-2-1 finish is way better. on utube too, info. 3 parts thinner,2 parts varathane,1 part boiled linseed oil in a sealed jar. needs emulsifying then put on with small rag. sand when wet, wipe off. 2 coats for natural look, 3 coats for a build.

[@RobCosmanWoodworking]

Thats a tried a true recipe and i have used it, but i prefer a tung oil finish to 30-30-30

[@TheHardwoodGrove]

Hi

[@stevebosun7410]

Hi Rob, I'm surprised to see you rubbing the finish with your hands. Do the natural oils in your skin not affect the next coat of finish?

[@scarkwright44]

You mentioned the main downside of an oil finish is the time between coats, I recently went on a box making course at The Wood Workshop in Penrith, Cumbria, UK, they have developed an oil that only needs about 30mins between buffing and not only that it really does not matter if the work piece is not dusted off. Sounds to good to be true, then I suggest trying it, if you can get hold of some. www.woodworkshop.co.uk

[@Erklzanderz]

They make it in satin.... which is obviously more full than a semi-gloss

[@1deerndingo]

1. I too would not be able to resist opening that draw in the standing desk. The fit is just too cool. 2. I swapped to Poly-X hardwax oil. Two coats is enough. It's tough (was designed as timber floor finish), comes in matt through to gloss, easy two coat application and the less you use the better. You really only smear it on and spread it as far as you can with a a non-abrasive scouring pad. The lightest of a sanding between coats.

[@RobCosmanWoodworking]

Sounds very interesting. I have never tried it

[@1deerndingo]

A link to a KZbin by Matt Estlea showing how to apply it, pros and cons of it's use and best applications. kzbin.info/www/bejne/gnnQi6KubryKiac

[@justtommy1346]

Am I the only one who heard Darth Vader at 21:10

[@LarryB-inFL]

Pretty surprised to see you using your hand as sandpaper; I would have thought that the hand had far too much oil on it.