Part 2 - How to Fix your Tire Rub Issues HEAT GUN ! Toyota Tacoma or any other offroad truck / suv

This video is about Tire Rub Fix on my Tacoma but works on other trucks.
First is to figure out where it's rubbing then working on how to fix it. Most of the time it won't cause any damage but it sure is loud when it happens!!!
If you think about a getting a 285 tire you may need a Cab Mount Chop (CMC) done.
I FOUND MY HEATGUN FOR PART 2!!!
If you need a dremel I got it here: dremel with grinder tool amzn.to/2AHcdEW
heat gun amzn.to/2CAxaP1
items used to produce this video:
Samsung Galaxy S8+ amzn.to/2wCFA4M
Manfrotto mini tripod amzn.to/2EvV6UK
Metal Smartphone Tripod Mount for cell phones amzn.to/2lCN7g0
-----------------------------------------
Please check out instagram @_robdaman
______________
Disclaimer:
Due to factors beyond the control of Rob Daman, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control , no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Rob Daman.
#tacoma #toyota #quicksand #robdaman #robdman #coopertires#stmaxx#volkracing#quicksand#trdbro#trdpro#tacoma#quicksand#truck#goexplore#getoutdoors#offroading#wheeling#overlanding#mallcrawler#trdoffroad#Tacomaworld#toyotatruck#toyotalove#toyotatacoma#bajadesignsofficial#TacomaBeast#TCMBST#te37x #raysmsc #sema2019

[@RobDaman]

Thanks for watching this video! I was recovering from the flu but I wanted to get out an important video for you guys. I was low on energy but not low on information.

[@uno3863]

Just had 265/75/r16 with -10 offset installed on a stock height 2012 toyota tacoma today and had to get my cordless dremel and cut the lil plastic corners where the tire was hitting, definitely gonna try this with a heat gun, good technique 👍🏽👍🏽

[@theforestisdark9676]

Literally same issue on a 2006 toyota 4 runner exact tire setup did you ever fix it ?

[@uno3863]

@@theforestisdark9676 yessir, did the melt mod and now all good, eventually ill get maybe a slight lift nothing drastic so i can hit moderate trails without worrying about tearing inner fender parts, but for now 👍🏽

[@Dnasty1]

I just went wider in my fronts and have a slight rub on the back of my front inner fender liner at full turn. This was the first thing that came to mind glad to see someone else has done it successfully

[@carrottopgaming]

What did do to fix it I only rub when turning sharp or full turn as you say. In the back of fender as well

[@Jugosvlog]

@@carrottopgamingdid you fix it?

[@autumninpdx]

Thanks so much for the tips. I just put a 2" lift on my '07 Outback yesterday. Took it to Les Schwab for new tires and wheels today and they rub a tiny bit. So I need to trim the fenders. Just came across your video and I'm headed to get a heat gun. Thanks again for the great video!

[@RobDaman]

Glad I can help.

[@marklloyd6522]

Great video Rob! Exactly the issue I'm having with my new 265/70/17 on stock height. Thanks!

[@jeremytran1163]

me too this video is great!

[@ironman-xq8od]

I did this with heat gun today and it was so easy and simple! Thanks for posting awesome video.

[@tedgentscheff7718]

I had stock 15in tires and rims on my 1998 BMW 318i e36.. I bought a full set of bmw 17in (used) from an x-1 .. Had the problem of rubbing, this heat gun trick worked great !!!! Thanks for this video.

[@RobDaman]

Hey glad it worked for you! Thanks for watching.

[@jvm708]

Nice. Did the same on my 4runner and used a block of wood and left it overnight. Worked beautifully

[@alphamale6097]

Dude this helped out! Just subbed, thanks for taking the time to make this video it is appreciated. Nice truck btw I like the fog light replacement you chose.

[@Yuugata31]

Like the THX intro. Brings back old movies to mind.

[@Turtlemilk]

Just bought a heat gun on Amazon and should be coming in tomorrow. Can’t wait to try out this method

[@clairebear5029]

Nice. I literally was thinking of doing this and wanted to see if anyone else has done it. I really like the spray bottle idea to quickly cool it in place

[@RobDaman]

Thanks for watching 👍

[@woodencanoes9362]

Very helpful video. Only have a small front end rub and was dreading chopping. This worked great!

[@RobDaman]

glad to help. thanks for watching

[@reyflores4606]

Good video. I was able to get the tires to stop rubbing.

[@deeznuttz7980]

Just had this issue with tire rubbing on plastic so I thought about the heat gun before I seen this video but I'm glad I'm right

[@ashersnyder5912]

Super helpful! Didn't think it was that simple. Thanks.

[@j0che28]

Awesome man. I’ll give it a shot tomorrow before I remove my spacers. Thanks for the video 😎🤙🏼

[@RobDaman]

let me know how it goes. don't be afraid to really push that plastic.

[@j0che28]

Rob Daman. I will bro. Not going to lie I was a little bummed out when I felt them rub but after watching your video i was finally able to breathe 😱 lol.

[@Jugosvlog]

Put some 305/35/24 wheels on my gmc sierra 1500 2002 and they rub a bit on the inner fender liner I’m going to give this a try

[@silverslvr5185]

Wow! I just installed ray10’s (dark bronze) on my quicksand Tacoma! Went with same tire size (Yokohama x-at) and same areas are rubbing. Thanks for posting this

[@RobDaman]

Jason Dahlstrom glad to help

[@scottlandb6579]

Did you ever resolve that issue? Do you have a lift on your truck???

[@scottlandb6579]

@@RobDaman were you experiencing rubbing w/ standard trd 4x4 suspension. Would a 2-2.5 inch lift had resolved that issue?

[@RobDaman]

@@scottlandb6579 the rubbing occurred when offroading mostly. This is a stock suspension in this video. There was some rub while turning coming up parking lots. A lift will help on road but not for offroading as your wheel will "stuff" into the fender then rub. I just put up this video kzbin.info/www/bejne/n5_ZnIKtfdmbrbc you can see me stuffing the front.

[@fernee909]

Great video!! Just bought a heat gun myself

[@lawsofhumannature2049]

Nice, in the process of doing the same with my Nissan Xterra

[@romuloavanzado8502]

I have a '13 4runner for daily driving. Planning to fit a 275/70/17 in few months. Hope it won't rub. If does I'll use your trick. Thanks for the video bro.

[@RobDaman]

Romulo Avanzado thanks for watching

[@alfonsoalvarez5349]

I just put 1.25 spidertrax on my 2015. 275/70/17 KOs believe me when I tell you they are going to rub. Very disappointing.. only 1hour from install, driver side locked out. Getting a heat gun tomorrow.

[@pogo9162]

Yeah I'm 3" over stock with 33" tire, 17x9 wheel -+0 offset and a CMC was needed but thats all, I've been bottomed and articulated but the pinch doesnt seem to be rubbing at 3 over. (2016 ltd4by quicksand)

[@captainbankroll4511]

Great video. Just put 2" wheel spacers on my avalanche and its rubbing just on the driver's side, maybe ittl work itself out?? If not I will be referring to your video for the fix. Thanks a bunch dude!

[@RobDaman]

Thanks for watching. To answer your question it will rub against hopefully just plastic and may rub that portion out. The concern is if it's rubbing a pinch weld or fender. They rub enough to get really sharp then it will shred up your tire. Just look for the rub spots and you should be able to tell how much priority you need to put. Thanks

[@paulbotsyan1284]

Bro you’re awesome! Love the simplicity.

[@RobDaman]

Thanks. Glad to help

[@ChannelOne-1]

Good idea. Really need to make sure nothing is behind those liners, but I doubt there is any wiring back there very often...maybe some fog lights in the front.

[@RobDaman]

Thanks. Any wires are towards the front bumper. It's always smart to check first just like when you're drilling 👍

[@Theycalldexter]

I thank you for uploading this video , it was a real help man 🙌🏾

[@RobDaman]

Glad to help

[@ghostsallday]

Thank for this video! Though my problem is the pinch weld in my ‘15 Jeep GC, I’ll guess ill just heat it up & slam it

[@WonderWoman1992]

Love this! Thank you I'm fixing to do the same thing to my Tundra!

[@RobDaman]

Glad to help

[@Rob-pb8tp]

Great example of how this is done! Thanks Rob!

[@RobDaman]

thanks!

[@Rob-pb8tp]

Mine rubs in the same place, stock suspension, 265/70's with the 17" Ray 10s. Now I will just direct people here when asked.

[@RobDaman]

Awesome!

[@williej.8493]

Does your plastic have a little fabric layer over the top of it? Is that ok to heat up? It feels like a thin mesh on mine.

[@FRND23]

Did it fixed the rubbing tho? You did it stated that in the video. I’m looking into doing this also but first I need to know if it actually did for you. Thanks!

[@RobDaman]

Yes it did

[@jp1419]

Good video man doing this to my tundra

[@RobDaman]

glad to help. let me now how it goes.

[@squeeze55]

You make super helpful vids dude! Nice truck too!

[@RobDaman]

Thanks 👍

[@tomiokurt]

Nice!!! Just grabbed my heat gun from work. Wish me luck on a 2010 bmw with a set of wheels I should have measured better before buying🥲🫡

[@GhostNinjaTactical]

Very nice job bro! I was about to cut the shit out of the plastic on my truck. This is a much better option.

[@mikevictor]

thanks man. good idea with the stick and water spray.

[@RobDaman]

Glad to help

[@marshallupshaw4237]

Thanks for the info

[@darktoadone5068]

Once the plastic cooled down it didn't expand back out? I ask because I have this same issue but in a GMC truck.

[@RobDaman]

nope. heat gun is magic. 👍

[@tedriclolis2872]

Good informative vid. This is Whitetail Assassin from TW. Have a good one!

[@RobDaman]

+Tedric Lolis Thanks for the compliment and watching.

[@LG-mj5ns]

Great vid, I'm getting this exact set up in the future.

[@RobDaman]

Cool👍

[@tinman1010101]

great video rob. thanks for sharing brother!

[@RobDaman]

Glad to help 👍

[@devanrogers3133]

I'm getting ready to do this to my Lexus GX 460 to fit the slightly bigger tires for the OEM 18" Wheels. I was wondering if it matters what brand or type heat gun you use?? I'm sure some get much hotter and or work better than others but wasn't sure. I have yet to buy one yet but was thinking about just getting the more basic bright green OEM Tools Brand one from my Local Autozone for $30.00.

[@RobDaman]

Variable heatgun is best for control. I bought this one not long ago and works well amzn.to/41NtKVw

[@vonglo4587]

Thanks man nice video

[@blackpantherx4019]

Great video my friend I’m having the same issue with my tc I bought some 245 40 19 tires my front fender liner rubs when I turn all the way in . Should I do the same process you did on your Tacoma ?

[@willtrotter9603]

Can you put 265/70/16 on on Tacoma sr5 without any issues?

[@ksoloyang]

I was gonna rip off the plastic covers until i found your clip. Thanks bro

[@RobDaman]

No problem 👍

[@gera941]

Thanks for posting this it helped soo much!!!

[@RobDaman]

Glad to help

[@bigbo7632]

Just heat up liner put a thin pc of sheet metal between tire and liner and turn tire into it and let it cool off.

[@rabinboedhoe3533]

Hi,good video man.whats the best temperature to heat the plastic without melting it?

[@RobDaman]

Every heat gun and plastic reacts different so best practices is to start low and keep it moving while watching pliability

[@uli1891D]

I’ll try this but I don’t think it will work with 285/70/17 with a 2 inch lift

[@ryancolleran245]

Could you use this method instead of CMC

[@RobDaman]

That's a good question. It really depends how big of a tire you're using, what wheel offset/backspace, what suspension and even alignment as more positive caster will help. Also it depends what you're doing.. street, offroad, both. So going up 1 size you should be ok to do what I did. Going up more..then prep for cmc.

[@ryancolleran245]

@@RobDaman Thanks appreciate the response

[@rudedogii]

Wow I had a 2010 Tacoma with OME kit and 315/70/17. Must have got lucky with the older Tacoma.

[@RobDaman]

rudedogii very lucky indeed

[@brianbejado3237]

Cool informative video kapatid 👍, how did doing all this work out ? After dremel and heatgun method were you still rubbing?

[@RobDaman]

it resolved my issue 100% until I went bigger. this is the next step kzbin.info/www/bejne/hauTmYxqqtWLd5Y

[@brianbejado3237]

@@RobDaman i just literallly tried these methods (05/02/2020 4:30pm GUAM TIME) and really did the trick appreciate the information

[@RobDaman]

Thanks for the feedback

[@TexaSteven]

Your headlights are those stock TRD PRO Lights or is it a aftermarket set? If so what is the brand? Thanks

[@RobDaman]

Hi, they're a custom set. here's the vid about them kzbin.info/www/bejne/jKqniGqXrq9jnaM 🌮❤

[@cameronm2203]

will same size tire on stock wheel SR-5 raised 2 inch front, 1 inch back rub mud flap?

[@RobDaman]

highly unlikely due but easily managed if any.

[@psalm14401]

I’m about to try this on my 4Runner. I have the same KO2 tires. Did you notice if the plastic popped back out after a while or did it stay in position?

[@RobDaman]

No it's going to stay once you form it. Let me know how it goes.

[@tougervue4806]

does it work? Thanks

[@RobDaman]

yep

[@jeffery2211]

Thank you so much

[@HiAltitude8500]

Awesome video, that you! I'm thinking about going up to 265/75 R16's also on my 2017 tacoma. However, I have a steel front bumper that weighs about 180 lbs. Do you think that added weight will add excessive rub? I have stock TRD offroad wheels and probably won't add spacers or backspacing unless I have to. Thanks for the help, awesome videos man!

[@RobDaman]

Glad you like the vid. I doubt you will have issues on a 265/75 and that bumper especially with a stock offset wheel. The rub is generally an issue when it "sweeps" in and out not up and down unless it's a really big tire. You may want to change your coil springs to compensate for the added weight on the front end more for driveability and comfort. Thanks again for watching. 👍

[@HiAltitude8500]

Wow quick reply! I'll eventually upgrade to 5100's all around and new coils but just need to save $$$ right now. Just wore out my current stock tires and want to upgrade to a beefier AT tire. I know you've said good things about the K02's, did you have any problems getting them balanced? I've heard a few people had problems with that. Also looking at the ST Maxx's as an alternative.

[@MRSNIFFMEFINGA]

those headlights look dope as fuck!

[@Americafirst-i8q]

Here's how you fix a tire rub you put the proper size tire back on the vehicle

[@spencerfalzy]

Could I use a torch if I’m careful

[@RobDaman]

I wouldn't suggest open flames near a vehicle. That's just my thoughts

[@keijisantia6012]

Thank you, very informative video.

[@RobDaman]

Glad to help

[@JERMGOHAM]

How does he sit like that

[@francoiskbm1987]

ey Rob what size rims and tires r u on? and what lift?

[@RobDaman]

265/75r16 i actually talk about that in part 1 kzbin.info/www/bejne/pmLddYyFfKiqpM0

[@david._.jessup2604]

Mine is metal how do i fix that

[@RobDaman]

check out part 1 kzbin.info/www/bejne/eavThJV8YtOSrLc

[@TheMetalCrafter]

Just heat it up nice and pliable and wedge a tennis ball in there and go have lunch, nice truck

[@AimForTheBushes908]

Thanks for this. I just bought a great gun but i used it on my balls because they hang a bit lower than I'd like. But you are were right about going slow and only a little at a time. Got a little crispy in the process but that's ok since i already had kids. 🍻

[@1718HULK]

I put on 275 70 R 17 on my 22 Tacoma. The tire when I make tight turns rubs against the control arm. I was told if I put a one inch space around. It will rub against the wheel. Well, what can I do? Thank you.

[@RobDaman]

You definitely don't want to rub the control arm. Spacer is least cost and you'll need to make adjustments accordingly if you rub.

[@minhajuddin6607]

Will a steamer work?

[@RobDaman]

I don't think there's enough heat to work. Same with a hair dryer

[@minhajuddin6607]

Rob Daman my car used to be salvage so I think there’s something behind the liner I’m going to fix the issue after the lockdown

[@ksbarrett3]

A -12 offset and a 285 tire for my Tahoe would seriously cause about 3.5" of poke. Womp womp.

[@RobDaman]

That's some serious poke 😳

[@AwkoTwaco]

Fuckin life saver, thanks man

[@jacobj1517]

Im 9ver here luaghing at you noobs, I got 35s on a 2 inch lift on my 2000 tundra. Only way I cleared was a angle grinder