Tires too big rubbing fender. What can be done? Hint: Fender Rolling

[@michaelharris-2001]

They are fine if im careful but today I had 3 more people in my sedan and it was scarping a little more than unusual

[@StevenBTuner]

Do you want to be careful? :-)

[@webwebber]

This might have helped, a bit. The correct way to eliminate the problem, most videos won’t tell. If you have a more aggressive offset, this won’t be enough. BMW has a sponge strip on the inner lining then they spray the undercoat on top. You have to remove the undercoat and sponge strip in order to bend the inner fender further inwards. That will take time and effort. Plus you can install a negative camber kit to help. Better yet is to have a coil over to raise the car a bit if necessary, yet still keeping a good looking stance.

[@StevenBTuner]

...or a widebody kit :-)

[@MatMabee]

Raised my coilovers a hair, smacked my car into neutral and put some nice new grey lines into my impact sockets. Worked a charm, didn't have to buy a tool that'd sit around my shed for years.

[@StevenBTuner]

Other folks use a baseball bat and roll it between the tire and the fender :-)

[@MatMabee]

@@StevenBTuner baseball bat wouldn't of fit, but I do wish I thought of wooden dowels.

[@StevenBTuner]

@@MatMabee Great idea for sure!

[@123456bmx]

I can't wait to do this when I get 275 width tires on my 128i.

[@StevenBTuner]

With just the right wheel offset that should be possible for sure.

[@Tapped-o9k]

Thank you. I wasnt sure why my car made weird noises but it sounds exactly like in ur video. Ig the previous owner put on the wrong tieres

[@StevenBTuner]

Glad it helped you out!

[@cabl3guy2012]

I'm trying this on Monday! Went from 215 -60 - 17's to 225 - 45 - 18's... I'll let you know how it works

[@StevenBTuner]

Be great to hear!

[@Browardmike]

Did you put it on the same wheels 🛞

[@idokwatcher2062]

But what of the paint you rubbed away, will the metal not rust??

[@StevenBTuner]

Unfortunately, yes.

[@sadladd]

MY TIRES ROLLED MY FENDERS FOR ME 😭😭😭 caused paint chipping on the outside of one of the fenders :/

[@StevenBTuner]

Haha - that's the other way to do it! :-) :-)

[@sadladd]

Steven B. Tuner - yup 😅 i was gonna roll them when i install my coilovers this week anyways, but now that’s not necessary lol. disappointed about the paint tho 😔

[@StevenBTuner]

With self-rolled fenders you have to be super careful when reversing...

[@sadladd]

Steven B. Tuner - i think what happened was i was going a little quick the other night, and the car took a little jump 😅 i’m getting smaller tires today so i wont have this issue after lowering, but it’s still pretty annoying :/ but again at least i dont have to buy the fender roller anymore 😩

[@jkiasmoore1112]

how are the tires ?

[@frankieb2220]

NICE RIMS mate.. 😎

[@StevenBTuner]

Thanks!

[@basiaturner4659]

Put some wheel spacers on started doing this 😂😂 I loved the look and wanted to keep them thanks

[@StevenBTuner]

Perfect! :-)

[@slimmmslimm8692]

Wheel spacers take the rub away?

[@basiaturner4659]

@@slimmmslimm8692 the wheel spacers caused the rubbing. Before the tires were pretty far in and had a lot of room but the wheel spacers pushed them out to where they didn’t have much room

[@thisisraptr7280]

same lol

[@SAPPHIRE1K]

doesn’t rub anymore?

[@shotaverde2673]

Thank youu! I thought I’d have to sell my rims! 🤧💪

[@StevenBTuner]

Best of luck with the job!

[@patrickbitas5639]

My tires are rubbing to the inner wheel well pastic cover. Do you have a suggestion to fix the problem? My mechanic is suggesting to remove/trim the plastic

[@StevenBTuner]

Hi, I used a section out of a old wheel well liner in order to extend the existing one a bit so that it still reaches. If you jist cut the existing one then you will catch a lot of mud that will cause rust over time.

[@tommyh3603]

Im struggling with rolling the bit at the end by the rear bumper. Its sorta tucked in from rolling it. Anyone got any advice?

[@Elgapitano]

Or just put some camber

[@StevenBTuner]

Hi, thanks for watching and commenting! A good suggestion for sure - but I'm already at -2.5 degrees.

[@dvit259]

I know your video is 5 yrs ago but I hope you'll manage to read my message i am a first time driver and having interest on modifying my car im a beginner so you know how st00pid I can be so the first time I bought for my car is tires the stock tires are size 195/55 and I bought 195/65 and then when I got a budget I lower my car to a 1 finger gap height then I begin to here those sound like the one on your vid and the mechanic tell me its not there fault its my choice of height and my choice of tire size and if I want to have them fender roll I need to pay them because thats a different work so ofcourse my cheapskate ahh said aight im good with it so heres my question to you coz obviously im just a broke car enthusiast without the device you use to fix your problem but does buying a smaller tires will fix my problem? I dont want to fender roll my car and i like the low height of it i just want to get rid of the rubbing sound so my question is does buying a smaller size tires fix the proble? Its rubbing i just dont know if it is outside or outside of the fender

[@StevenBTuner]

Hi, the sound is the tire hitting the inner protective layer, so you don't want to wear it away completely or you end up with mud and salt and stuff getting in and rusting your car. Putting on he standard tire sizes again should stop the rubbing, as long as you are running the standard wheel sizes that the car came with.

[@MrYammizz]

I have this problem with my front 20 inch wheels 2014 Hyundai sonata ..if I rolled fenders what about my inner wheel fender cover ? Could I remove them or are covers to to prevent water and debris from getting up inside engine area

[@StevenBTuner]

Hi, thanks for watching! I didn't address that issue in the video, but what I did is get hold of an old inner liner, cut out part of it, and then riveted and glued it to the existing liner so that it was wide enough to reach. It is a bit of a hassle, but I think it is worth it to keep the noise down and the salt and other road gunk out. All the best in doing something similar for your car.

[@MrYammizz]

@@StevenBTuner sorry for late reply.., and thank you for replying ,That helped me alot 😊 no longer have that issue 🙏

[@nightmares2night77]

This happens on my pick up trucj is ot the tire or the rim ??

[@StevenBTuner]

Hi, different vehicles will rub in different ways.

[@J68browneyez]

Ain't no sound like some good owe club music in the background 👍

[@StevenBTuner]

:-) I have given up on music in the videos as I have had some false copyright infringement claims...

[@b.trill6868]

Got some aftermarket me for my c300 4matic sport 2010 old ones 17inch now after markets 18inch jnc rims .... tires are bigger now ofc and every time I hit bump pot hole just like beginning of this video. I hear it all the time.will this work ? My cars already low since it’s Mercedes ...

[@StevenBTuner]

Hi, thanks for watching! You should be able to get a bit more clearance using this method, but it is not without risks. There is a chance of cracking your paint, or any old body filler that you didn't even know about. You will also need to treat the inside of the steel with some new anti-rust coating, as well as modify the sound-deadening inner lining so that it still reaches the full width it needs to. So, quite a lot of work, but could be well worth it!

[@giuseppe1rapper]

i have the connection of the bumper higher and i think it touches too, any help? I need to roll my fenders but i think is not enought and my car isnt that low on the back , i have troubles when i have people in the back

[@stephenlalor2001]

So did it work? Did the rubbing stop I might have to do this to my own BMW next week I remember doing it on my Celica GT4 and it kinda helped...... be great if you done and after video

[@StevenBTuner]

Hi, it worked enough to get the 265s under there, so it gave me the extra 10mm that I needed to stop the rubbing. Unfortunately I didn't catch it quick enough, so the inner sound guard needed a bit of surgery to put back together.

[@stephenlalor2001]

@@StevenBTuner perfect 👌🏻 I just put genuine 220m wheels on mine with 265 at the back so I’ll try this thanks for the video

[@syleuva310]

Is it dangerous for them to rub Mine rubs on some dips but not every single second like in your video Would I be okay to let them rub??? They don't rub when turning though, just some dips Pros and cons?

[@StevenBTuner]

Hi, if your tire isn't getting shredded, and you can put up with the sound - then there is no problem ;-)

[@syleuva310]

@@StevenBTuner it won't damage the car or suspension right? Just the tire

[@StevenBTuner]

@@syleuva310 I'm never a fan of things rubbing where they're not supposed to - so it is a good idea to find out where the rubbing is occurring so that you can keep an eye on it. A common thing to happen is for the inner lining to wear through, which can then catch salty grit if you live in a cold region where they salt the roads.

[@shotaverde2673]

My tired side walls are getting shredded I wouldn’t trust it

[@jagermain8875]

@@syleuva310bit late but mine rub a lil when i go over big bumps. only touches the fender liner not the fender itself so it really shouldn’t be an issue

[@Carlos_350z]

How did you jack the car up like that? My car is too low and the fender roller tool sits up way too high?

[@StevenBTuner]

Hi, I'm pretty sure I covered that in the video.

[@EconomyElk]

na to stressful to me. om driving 4 hours to pay a more experienced guy to do it instead. 8 hour round trip prob would take me atleast that long to do it myself anyways lol.

[@StevenBTuner]

Sounds like a good plan to me! :-)

[@steverae68]

Why not jet raise the suspension on the rear

[@StevenBTuner]

Are you brave enough to do this to your BMW?

[@scottosborn4820]

No. No Im not. This seems like a modification that can not be undone.

[@fxdexter810]

Scott Osborn obviously lol

[@dannyr3346]

Theres no way those things rubbed lol.

[@StevenBTuner]

Hi, thanks for watching! They certainly don't any more :-)

[@dannyr3346]

@@StevenBTuner heck yea man. I love real life every day content. Keep it coming.

[@djjeyleckz3387]

The hard ways 😅😅

[@wanderpoltv4990]

The best solution is reduce the size of your tire and mags. No headaches. 🤣🤣

[@StevenBTuner]

Haha, you mean take the easy way? Where's the fun in that! ;-)

[@e36fanatics]

I rolled mine with hammer... 🤣

[@StevenBTuner]

If it works then it is a good method! :-)

[@e36fanatics]

@@StevenBTuner i have fiberglass fenders so ill have to cut off arches anyways so rusting caused by chipping wasnt really issue for me 😂 wouldnt suggest hammer otherwise

[@auditorarrojo2081]

❤

[@supremeresearchcentre7148]

Doing this on a bmw 😂

[@StevenBTuner]

When it comes to tires, bigger is better! :-)