Is the Corsair iCue Link Titan 360 RX the Best AIO Cooler for High-End PCs?

[@thedonald2025]

My favourite tech channel I don't like the big channels like ltt too much advertising sponsors and cringe robey is just straight to the point down to the business which I love ❤

[@robeytech]

Thank you!

[@edwardwilliams3815]

went with the h150i LCD iCUE Link AIO, couldnt find a LCD Titan 360, all sold out :( but def happy with the 150i :D iCUE Link was so nice to build with also, swapped to the 3500x Case and went RX120s for most of the fans except for the AIO, they came with QX120s...

[@robeytech]

Nice!

[@PixelatedWolf2077]

At least you can, in the future, upgrade to the LX120s

[@sabishiihito]

I can't find the "older" iCUE Link H150i RGB for under $200 (when it can be found at all).

[@slim1857]

Nice video :) I own the cooler over a 285k set up in a push pull configuration. Based on my tests, it can cool without reaching the throttle temp till 295w of tdp (which is huge I agree :)). 300w is the maximum. Based on the intel PL1 at 250w, this is a no brainer. Perfect. On idle, I'm around 30°.. perfect :)

[@jakegwilliam]

Very disappointed you can't fit it with the pipes towards the rear in the 5000D

[@MOAB-UT]

Are you handy? You CAN probably find a way to do a custom install. There is always a way to retrofit things and make it look cool. You might have to cut some tubing but hey, it's just thin tubing. I might add an aluminum piece that curves. Make 100% sure it will not leak and is full (no air bubbles) when you are done...but can it be done? Yes. A curved piece of glass tubing would look amazing. double clamped on both ends and also sealed with a compound. Any good plumbing store could help- just tell them what you are trying to do.

[@TechDove]

I just got my titan. I absolutely love the Icue link system, the hardest part is figuring out what wire connects to what fan back to the controller lol

[@robeytech]

Yeah, it’s not as straightforward as it would seem it would be

[@TechDove]

@robeytech definitely nice to not have 2 wires per fan though. And I think I managed to figure out my wiring lol

[@Prod.M00N]

I had these since november last year and they been amazing

[@12foot97]

How is it for noise level?

[@TheBoredOne1]

Silent ​@@12foot97

[@wretchedslippage3255]

This thing lowered my 13700k temps by almost 10 degrees across the board. MORE at times. H100i wasnt cutting it.

[@defischio9803]

Did you use the Vram cooler?

[@macc_azarraga_ama]

looking forward to the new Corsair 5000T LX Case Build by Robey

[@EnigmaGames96]

The pump connection need to be connected to the hub directly or you can daisy chain it to another fan?

[@pchoov]

You can daisy chain it

[@thefearslessboy2765]

Hey would this aio be good for the ryzen 7 9800x3d?

[@robeytech]

Yep

[@adamaguilar4972]

Yes sr… I’m running it with the ryzen 7 9800x3d….

[@klooger28]

I am also running with the 9800x3d, seems fine so far, max temps are ~80-81c under stress test, closer to 60c in games.

[@andresescalante770]

I just picked uo the H170i LCD Elite 420mm. But im just seeing this one what would you say is the better one? I paid $299 for the H170i

[@pchoov]

Bigger is better as long as your case can fit that configuration

[@hokiesrex9599]

Needed this video to find out if it was worth and it helped made me second guess if I should get it. Now looking into the asus and nzxt aios 👍✌️

[@mbrosenb86]

I don’t see any information on noise that makes all of this data completely useless because anyone can just turn the fan speed up and the pump speed up to extreme and get great thermals. It’s all about noise data.

[@robeytech]

It will be in future videos. TBH saying that a cooler is all about noise is still a fallacy given all AiOs in normalized fan curves go to 100% above 80ish degrees and your case fans have way more to do with system noise than an AiO. We are adding it, but cooling is the core of a cooling product and measuring it’s effectiveness is the highest priority

[@bc2prod.820]

I feel like mine are pretty loud even with a good fan curve.

[@flo1409]

I miss a thermal / noise relation

[@JohnPaulo0927]

Is this normal? My liquid temp slowly reaches 40c when idle but also stays there while gaming. I'm using the same AIO but with the lcd version and my cpu is an i9 14900k with intel default settings, though cpu temps are fine

[@mustafashihab180]

how is your temperature when gaming? and what resolution do you game on?

[@JohnPaulo0927]

@mustafashihab180 My temp usually while gaming is 50-60c and occasioanly hitting 70c and I only game at 1080p T T

[@mustafashihab180]

@@JohnPaulo0927 that's good temperature, if gaming at 1440p and 4k temps will be lower

[@thebeastPS3]

Bruh but his is already SOLD OUT!!! Wth i want the LCD white :(

[@dexstarrslaboratory4289]

So AF III is still the best option compared with price/performance 🤫

[@robeytech]

No Phanteks Glacier M25 is the best for that

[@dexstarrslaboratory4289]

@robeytech with double price?😊 For phanteks around 207 dollars on Newegg and 88euros (EU price) for afIII360mm sorry but I don't agree with you

[@idressiqbal]

ATM with af III being abou 40% discount on Amazon in gbp ill definitely be grabbing that

[@PixelatedWolf2077]

Why dont you also look at Fractals S36?

[@pchoov]

@@idressiqbalaf series is still good but, the rx series is mind blowing better. I’ve had both and I would say the rx series is worth it

[@Mc-Derpulous]

Months after i buy it, reviews drop haha... got the titan and lcd screen cap. I love it, but corsair has gotten to fix the icue software ffs..

[@robeytech]

Agreed

[@Gwal]

I will never buy a Corsair RGB product ever again, their QC is just bad, LED often end up failing after 1-2 years..., happened to several Corsair LL fans a couple of years ago, and most recently again with Corsair QX fans

[@ravioli9006]

Corsairs products are good. Overpriced yes. And there icue software is horrible i had nothing but issues with it overtime.

[@MOAB-UT]

What are you using now? I just got it today. It seems to work- for now! Just Ique fans- no pump. The Black Freeze III did not work. The fan did not spin. Not sure if it had a light but no light at all on the fan motor. Barely felt and liquid moving around and each hose was the same temp. I have a thermal gun. I heard one side is supposed to be hotter than the side after the radiator. It's going back. What should I get? For now I am using the stock AMD Wraith CPU Cooler and fans. Looks pretty and clean but it's a bit loud. Vision case. idle temps around 45C. I run a 9 7900 which is a power sipping 65 watt 12-core AMD processor. No GPU yet- waiting on RTX 5070Ti next month. First build in 10 years. Any tips are appreciated. Also, I am running EXPO. 2x32 DDR5 set to 6,000 though it says max for this CPU is 5,400mhz. It's fine. I am not a big gamer. 850 Watt Gold Corsair PSU. AsRock x670E MOBO. Samsung PRO 990M.2, 2 TB drive.