Corsair iCue Link setup and wiring guide

[@TheProvokedPrawn]

This is one of several videos I've crafted on the Corsair iCue Link system, so be sure to check out the others as well: Here's how Corsair iCue Link can transform your PC case kzbin.info/www/bejne/boqkd4OGpaaEgpY Corsair iCue Link System review and feature guide in the Corsair 5000D Airflow kzbin.info/www/bejne/mKO6q2Z3ect0n6M Corsair iCue Link & 5000D Airflow upgrade Behind the Scenes kzbin.info/www/bejne/n36wg5ugoaqAm6c Specs of this Corsair PC build (note this includes affiliate links that earn me a commission at no extra cost to you) Motherboard - Gigabyte X670 Gaming X AX (kzbin.info/www/bejne/goqnZq2LgZ5khJI) CPU - AMD Ryzen 7 7700X Case - Corsair 5000D White RGB (kzbin.info/www/bejne/rV7CmGqfo62WjpY) Fans - Corsair QX120 RGB (go.corsair.com/Y9yMXq) CPU cooler - Corsair iCue Link H150i (go.corsair.com/q42aQO) iCue Link Cable Kit (go.corsair.com/ZQyMo0) RAM - Corsair Vengeance RGB DDR5 16GB x 2 6200MHz (go.corsair.com/eKAL3Z) NVME - Crucial T700 PCIe Gen 5 SSD, Corsair MP600 XE (kzbin.info/www/bejne/eGGbdKluhcdspKs) PSU - Corsair RM Shift Series 1000X Shift (kzbin.info/www/bejne/r5LJk353qt6hqtk) Cables - Corsair Premium sleeved cable kit type 5 (go.corsair.com/Vm6MJJ) Lighting - Corsair LC100 lighting panels (kzbin.info/www/bejne/rHWyamidnaaFgKc) GPU - Gigabyte RTX 4070 Ti 12g OC kzbin.info/www/bejne/lV7FpmmnedaYjaM GPU Anti Sag Bracket (go.corsair.com/jrO9Nb)

[@maxabillon]

Very nice detailed Guide, How's the pump when running, totally silent, No buzzing/hum ?

[@advancemoment301]

Corsair should provide Mag lev fans for this cost at least..

[@BrunoSilva-nh5og]

Thanks for this guide really helped me connecting the fans and cooler was a fckin headache to get it running

[@fannypack7705]

can this be installed in the lian li 216 rgb?

[@TesGon]

Yesterday, I assembled my PC ( first time in a lifetime) in Corsair 5000t case with FULL icue RGB fans and AIO based on this sole video that i rewatched 10 times. Insane good video. Thank you. P.S. Not only this video helped me assemble my PC but many others from THIS channel!

[@TheProvokedPrawn]

Glad to help

[@Deathwish699]

quick question do i need to buy the cable kit from corshair if am going with 7 fans and icue radiator ?

[@TesGon]

@Deathwish699 no additional cables were required. I had 2x boxes of 3 in 1 kit of QX120 RGB coolers + 1 single box of QX120 cooler + QX120 radiator( 3 fans) on top of the case. No any additional cables were needed. These boxes have it all. Very clean but expensive build!

[@luiscaraballo1891]

Bro, im doing that right now, how i can connect the controller to power ?

[@jacobwoodley8405]

Just wanted to say thank you. I wasn’t getting power to the fans on the radiator on my H170i. I couldn’t figure it out because the directions weren’t clear on looping a cable from the end of the radiator to the side/top of the radiator. Seeing you do that instantly fixed the problem and ended my woes. I didn’t see the port on the side/top when I installed the radiator so was clueless to its existence. Thank you!

[@TheProvokedPrawn]

Glad to help!

[@mascot4950]

Same here, although the suspiciously short length of some of the cables had me hunting for a guide a lot earlier in the process. When I found this video my first thought was "how the heck is that not in the manual?" So I went back and checked. I wish I could paste an image here, because it's so dumb. It's angled from above the fan, so you see the connection to the controller, and a cable going off the bottom of the image. If you look closely enough, you'll see a few millimeters of it looping back up and disappearing behind the edge of the fan. That's it. The actual connector is not visible whatsoever, and nowhere else in the manual is the connector on the side of the fan shown. Someone decided these were clear enough instructions. Sheesh.

[@blowfishes]

Have watched this video several times and each time missed the looping back of that short cable. Thank goodness I read the comments section 😅

[@willimajoebob1764]

thank you you saved me and my friend so much time and energy, he bought this and I had no idea how to install it. eventually we ran into your video , your video is the perfect video that we needed. Thank you for the video, I will like and subscribe because of this.

[@TheProvokedPrawn]

Glad to help William! Enjoy

[@albakaz2345]

Thank you, I finished building my first high powered PC thanks to two of your videos, both assembly level and selected parts

[@TheProvokedPrawn]

Glad I could help. Hope you appreciated enough to subscribe 🦐

[@albakaz2345]

Hello, I have a problem with my icue link h170i. I have an Asus rog maximus hero motherboard and when I start the PC I get a message: CPU error fan. The operating system is not yet installed. Could you help me?@@TheProvokedPrawn

[@DidYouReadEULA]

Thank you for all the help!! Got all my goodies in, the white EVO XL, seven white Corsair iCue QX fans, and the white H150i LCD AIO. Without your help I would have never finished it. It looks gorgeous and performs great!!

[@TheProvokedPrawn]

Excellent. Glad to help

[@YouBeeBeeWhy]

I think Corsair realized that not including the mini cable with the single fan was a bad move. I just purchased the AIO, 3 fans, and a single fan -- and the single fan came with the cable in the box.

[@Equilion]

Hmm... 2 weeks ago I bought 3 single fans and in every box was a cable included. Maybe they switched to delivering that recently.

[@edizzyzantua2416]

This is 1 of the best tutorial ive watched before I buy my own iCue link bundle. Huge Thanks bro! More power!

[@TheProvokedPrawn]

Thank you. Hope you liked it enough to sub

[@edizzyzantua2416]

I did

[@PowderMonkeyJack]

Very articulate, thorough, yet consicise. Was easy to follow and refer back when needed. Replicating based on this saved me so much time and frustration. As far as voice quality, if you did audio book narratives, I could listen for hours. Thanks for putting this together and sharing.

[@TheProvokedPrawn]

Glad it helped!

[@travismorabito8253]

Thank you so much for this video. From it I found that the fans needed to be connected to the radiator hub. The corsair guide didn’t make sense but this video saved me from pulling more hair out! Cheers!

[@TheProvokedPrawn]

Glad it helped

[@noobiplays8539]

Just a personal thanks, i built my first pc at 32 y.o. never had the money finally saved and went full amd/corsair. Your videos got me to boot screen/installing windows. Cheers 🍻

[@TheProvokedPrawn]

Glad I could help!

[@Xuses]

Would love to see you make this build but in a Corsair 7000D airflow white. I would like to know if it's possible to set 4 fans in the front, 4 in the side, 1 in the rear and then the 3 AIO fans up top without any issues.

[@ericgraham23]

The part where you plugged the single fan into the AIO fans is the moment I decided to buy all this stuff for my next build. This was made for me, I hate routing fan cables lol

[@vgouveiaaa]

It's not a good video! It's an excellent video! From the perfect rhythm of the video, the clear and serene voice, the detail of the information, the quality of the image and sound... The content is an asset for anyone who wants to build their own PC. You've gained a new subscriber! Congratulations and thank you!

[@TheProvokedPrawn]

Glad you enjoyed it!

[@graffix3001]

Great video. The Icue Link system really makes cable management much cleaner. Your build looks really nice as well.

[@TheProvokedPrawn]

Thanks! Hope you enjoyed enough to sub

[@kamxam1384]

Just got most of my parts for my new build and am going with this link set-up. Going to go with the H150i Link AIO, then replace the two 120mm fans on my GPU Radiator with the Link fans, then link to two more 140mm QX fans on the bottom of the case. And Finally connect the rear QX fan to the AIO or the bottom fans. (Have to see the space situation first) As a FYI, Corsair is now selling the Link AIO Radiators with the LCD display. (Also has the standalone LCD you can replace the old one with but it's on back-order atm) Many thanks for the video! Knew the basics for this already, but this video makes it a lot easier to understand.

[@TheProvokedPrawn]

Yeah I'm hoping to get the LCD cooler sooner

[@davidhwang4221]

Thank you so much. My Corsair h150 RGB just died and was dreading cable management. I am now planning to upgrade to the same setup you described but had questions re installation and extra exhaust fan options. So much cleaner and easier.

[@djsalamat]

Thank you so much for this video. This is the best AIO on the market and the quietest (both fan and pump). However, I couldn't install it without watching this video because the factory manual wasn't very clear.

[@TheProvokedPrawn]

You're welcome!

[@Photoshopuzr]

you got the same number of fans as me, I just found out about this system after revising what's new with Asus ROG so I knew Corsair had to had there's also. IMO when it comes to RGB corsair rules, I just ordered this before checking the video I will need that last cable for the back fan to daisy chain it. Thanks man.

[@generaljustinian1082]

Thank you so much for this video, the instructions mention nothing of the fans and I thought I was crazy when I didn't see the messy wires

[@TheProvokedPrawn]

Glad I could help!

[@LETRODE]

thank you so much i ordered like the newer generation of the aio but almost the same and i didnt understand anything you really were a life saver

[@TheProvokedPrawn]

Glad to help!

[@efrainSRT]

This looks much easier than my current fans and lot less cables gonna need to upgrade soon.

[@bean420man]

It sure does. I just finished transplanting everything from my old case into the 5000D Airlfow and am using 6 corsair fans with the commander core XT. At first I thought I was going to be able to make everything neat and tidy but I soon realized that I was still going to end up with cable salad back there. In the front of my case everything looks great but the back is a nightmare.

[@yoobollo420]

Just bought the aio and a a 3 pack and a separyone by it self. The 3 pack now comes with 2 cables even though the box says just one. So they learned they need to give a extra one

[@markybgxxx2066]

Still not OK. for my setup i need 3 cables

[@yoobollo420]

@@markybgxxx2066 I requested some free one from their reddit. Two more came in free through the mail. If you live in socal you can have mine

[@Marcelhamster]

I only speak a little English but the video helped me a lot. Everything was explained well. 1+ with asterisk! Thanks!

[@TheProvokedPrawn]

Glad you liked it!

[@DavyXJones]

Update For anyone watching this video since being released, single fans also include the wires in the box now, and the tripple 120 and double 140 kits come with multiple different wires both 90 and straight cables and also come with a hub 🙂

[@TheProvokedPrawn]

👍🏼👍🏼

[@darkhound222]

So buying the single fan will automatically work with the link? dont need to buy a icue link cable anymore?

[@raw0302]

​@@darkhound222 yes!

[@MrVoayer]

Corsair improved on Lian Li ideas and came out with some nice solutions. But with some ugly rip offs, as well ! Anyway, this video is a helpful tutorial for future owners ! Nicely done !

[@YesThatDigs]

Appreciate the heads up on the cable link -- new build on the way and did not anticipate needing the extra cable!

[@TheProvokedPrawn]

Apparently it's no longer an issue as they've updated it to include the cable.

[@tiziano4302]

Hi guys, I didn't remove the plastic on minute 9:18, it's a big deal? Pls this stupid thing is driving me crazy and i alreasy installed it so idk if it's worth to do it again. Ty ❤

[@TheProvokedPrawn]

It helps keep it attached to the motherboard but if it's not loose you should be fine

[@bradmoye4286]

Wow. So much easier than the Commander and Commander Pro and the link nodes. Cables are just everywhere with those. Fan control cable, RGB control cable, multiple commander nodes, etc. just makes it one big mess with trying to wire manage it. I am seriously looking at going this route with the new link system.

[@markkravontka6065]

Your video helped a ton on a new build. It's been a while so your video was a life saver. Thank you!

[@TheProvokedPrawn]

Glad to be of assistance. Hope you enjoyed enough to subscribe 🦐

[@BestMods168]

Yeah. Microcenter prebuilt didnt have the rear fan. Almost didnt find a plug for that extra fan. These will come in handy next time around.

[@ThatAngryBrit]

Having just had to rebuild my system with 6 of the old fans I would just like to say "THANK GOD".

[@NecroMoz]

Step one: remortgage your house.

[@TheProvokedPrawn]

ha

[@Sapper29]

That entire setup is like $500. Not that much.

[@advancemoment301]

​@@Sapper29Hmm corsair should provide mag lev fans at least but it rips off more pathetically than apple

[@ae86luy]

@@Sapper29depends what case you get

[@stercan]

Im in shock, and we thoughed Noctua fans where crazy

[@tomRX4878]

Just to let you know: I bought a iCUE Link QX120 RGB Expansion Kit (single Fan) and I had an extra cable in it. I just did a full 10 Fan 5000D Case build and I didn't needed any additional cable. (2x 3fan expansion kits, 1x 1fan expansion kit and 1x H150i RGB kit) - The only thing that worries me, is the motherboard cable behind the fan/radiador. They are mega tight.

[@byungna2566]

Thanks! Very useful and thorough for DIY PC Builders.

[@TheProvokedPrawn]

Thanks for watching. I've got a new and improved guide here with more information - kzbin.info/www/bejne/Y5vIf2SjadJpY7c

[@Max.Drl2t]

Thx you are the first proper tuto I found. 👍

[@TheProvokedPrawn]

Thanks for watching

[@MaddJakd]

The cable thing isn't that bad. Just installed a QX140 starter kit. Then after confirming the other fan sizes, ordered another single QX140. Both the kit AND the single come with a short right-angle cable. Not sure if it's an update or not, but unless one is trying to connect something way across the case, or a straight plug is either ideal or a must for "perfection," you're set.

[@georgegn6534]

Made a new build with the old wire style and ended up with like 30 cables in the back to manage. Now this comes up in my feed

[@lutrox612]

Hello, nice video 👌🏼 I have a question: i Got the msi b650 project zero motherboard and the corsair titan 360 x and also gave that rgb controller. What is that small cable at 10:14 for ? Besause I nothing changed when I installed it.

[@RaiseDennis]

This is insanely nice and cool. I am quite fond of your videos they are nicely made! Thanks!

[@TheProvokedPrawn]

Thank you very much!

[@Megatrance9000]

Thank you. Much better explanation than what Corsair did.

[@TheProvokedPrawn]

Glad it helped!

[@Megatrance9000]

@@TheProvokedPrawn I really like the daisy chaining. I'm planning on eventually replacing all my fans with the RMX ones. Much cleaner setup than with a commander core.

[@jasonjtg21]

Love the new way to connect and daisy chain. I really wished there was a backwards compatibility. Some sort of add on box or something. t

[@Theogwill]

Super thanks! Since there wasn’t any instruction manual nor a video from Corsair this was perfect!

[@TheProvokedPrawn]

Glad it helped!

[@JohnJohn83UK]

Thank you very much for this, built my new system with a ique link h100i aio but my fans weren't lighting up or spinning, I had the short hub cable going from hub to radiator not fans to radiator. I wondered why it was so short. Thanks to your video I was able to work out what I done wrong.

[@rmorenberg]

I just used this video to connect my system correctly. thanks again

[@TheProvokedPrawn]

Glad it helped

[@snogard106]

Dude I love your voice! You sound just like another channel I watch for Final Fantasy 14 news, Meoni lol. Anyways, really helpful video that I will be coming back to in a few months once I get all the parts for my new PC build!

[@TheProvokedPrawn]

I've heard that a lot. Hopefully they hear they sound like me one day.

[@auraflood6810]

Just wanted to ask the guide was really good but I got stuck on connected my 6 psei into a power supply my pc doesn’t have any other than SATA connectors and my cpu power also a 8 psei adapter wanted to see if I could any help if not thank you amazing video

[@BlakeBake]

Your video was a big help. Just grabbed an h100i plus two QX120s for a Plex server. Thanks 🍻

[@TheProvokedPrawn]

Glad to help!

[@marksmales2204]

I just purchased all of this, only need 6 black qx120 icue link fans next. I ended up buying 2 white qx120 icue link fans to test...I was wondering how the rear fan connects to the iCUE link hub..but after watching your video. Thank You.

[@kinglydota]

I believe they changed the cables you get because I did this exact setup a couple of days ago and had enough to link the rear fan to the top fans without buying another cable set

[@mrtomhallett]

You sir have helped me solve my problem, you have the same fan setup as me and near enough the same case as me, i needed help with how to connect the single rear fan..because i originally had it on its own socket in the system hub and the others all on the second hub, i felt like thats why i was getting a notification about the brightness being reduced due to system hub limitations even though i was sure one hub could manage the LCD screen,3 rad fans and 3 front fans equaling 7 for one socket

[@TheProvokedPrawn]

Glad to help.

[@ixman]

Excellent editing and information. Thanks!

[@TheProvokedPrawn]

Glad you liked it!

[@CrossK6]

You just saved my life ! Thank you very much for your excellent video 😁

[@nitygrity8463]

Hey thank you very much for your video I just installed the radiator and fan system in a new pc I'm building flawlessly all based on your video it worked great 👍😃

[@TheProvokedPrawn]

Glad I could help

[@ethan_gameryt4349]

Great video, I’m a bit confused on one thing though, what is the usb c cable on the radiator for?

[@TheProvokedPrawn]

You need that if you use the LCD screen upgade

[@WebGremlin]

It's important to note there's a limitation of 7 devices per connection side on the hub. That means if you have a Corsair 7000 case and want to mount 4 120mm fans on the front and 4 on the side, there's one fan that can't be part of the daisy chain and needs to be cabled separately. Likewise, in an AIO setup with a push/pull configuration, so 6 fans, and the rad itself counting as a device too, you're already maxed out. So you can't have your rear exhaust linked to the rad and would need to cable that separately as well. But the hub only has two connections for a maximum of 14 devices. So in a setup like that you're at 16 devices and thus you'll need two Link hubs to connect them all -- and long cables to loop all the way from one side of the case to another. Which might be a problem since the longest Link cable is only 600mm. The Link system would work decently well in a 5000 case, where you can 'only' have 6 intake fans on the front, bringing you down to 14 total devices. But still, if you have a push/pull AIO you're going to have to connect your rear fan all the way to the front fans because the AIO completely saturates one side. So I feel the system is really contradicting itself. The concept is great because you minimise cabling immensely when you have a large amount of fans - such as their cases *enable* you to have - yet the system doesn't work well if you do. Which could be remedied instantly if it would allow just one more device per side. A missed opportunity if you ask me.

[@David-nd4to]

well put

[@doinks6921]

I don’t get how u would cable one of your side/front fans separately they all want to connect already and there is nothing we can use to separate them from automatically connecting, do I have to just force apart because that looks ugly

[@snorkob]

Thanks for this video!!! I just wish I had seen it sooner since I need the hub to continue my build

[@TheProvokedPrawn]

Glad to help

[@MysticChrome4k]

Did a refresh on my pc and a new case and picked up these fans over a week ago and they look really nice. Just waiting on corsair to send me more cables so i can hook up my other fans lol

[@skeetmaster3731]

How loud are they?

[@MysticChrome4k]

To me they only become noticeably louder at 1700 rpms and above. Other than that they're pretty quiet.

[@crazydave2021]

Just to be sure, daisy-chaining all the fans + the liquid cooler together won't overload the motherboard or power supply in any way? I plan to do the AIO, 2 140's on the side, 2 140's on the bottom, and 1 120 on the back.

[@TheProvokedPrawn]

It's all powered through the controller but you can only have 7 things per port. So you couldn't do all that on one connection

[@crazydave2021]

@@TheProvokedPrawn First, thank you so much for the quick reply! This will be my first PC so I don't wanna goof it up. So if I ran, say, the AIO and 2 fans to one side of the controller and then the other 2 + 1 to the other side of the controller, should I be good?

[@robert3892]

Really love the presentation of this video. Highly recommended.

[@TheProvokedPrawn]

Glad you enjoyed it! Thanks for saying so and for subbing!

[@kiadarkley5381]

Ty for ur video and it helped me with my new set up but i noticed ur video card is sagging .are u looking to fix that at all or just let it go . ?

[@40kbolter]

Great professional guide and important information. Thank you! 10/10

[@TheProvokedPrawn]

Thank you. Hope you enjoyed enough to sub

[@civsully1740]

Are there any issues adding an additional set of Link fans to a 7000xRGB case which includes the pre-installed Commander XT? I would imagine that the two would be independent? If that is so is there any potential software conflicts running the pre-installed case fans off the Commander XT and the additional link fans off there own hub? Thx in advance!

[@SuperDruckerpresse]

I also have the 7000x with the preinstalled fans and there aren't any software conflicts whatsoever

[@Researcher30473]

With your set up you leave 2 slots on the aio fan near the exhaust fan and you can plug this in there in one of the slots of that fan... I have the aio wires to the back of the case but it gives me only one slot on a fan because the aio pipes are in the way effectively stopping me from daisy chaining the exhaust to the aio fan.

[@Researcher30473]

So at 6.21 can you see the pipes blocking the slot for the exhaust fan..

[@Delphinus-Keya]

I have two older icue link control/comand moduals and neither came with the 4pin-2pin fan connector. Any idea where to get that wire from as I cannot find it online.

[@TheMrFred193]

Great informative video. I purchased the Corsair iCue system and your tutorial is very helpful. Thank you!

[@TheProvokedPrawn]

Glad it helped!

[@chris20001965]

Will be helping my son build his first PC soon. Any idea if the CPU cooler will come with an LCD screen at some stage?

[@TheProvokedPrawn]

Later this year apparently.

[@cuongtang9539]

super video, but i have a question. is there no need for like these plastic middle pieces (metal + metal = electrik short) ?

[@mjames7084]

I have a question, I have Corsairs RGB fans with the rectangular box and the AIO controller. Do the two link? Can you do a video on that?

[@mjames7084]

On a side note, Ive been building PCs for years but this is my first RGB build and not as easy as I thought. You do a great job explaining. Thank you

[@TheProvokedPrawn]

I have a newer video which is more indepth and updated with new things from Corsair including firmware updates. See that here - kzbin.info/www/bejne/Y5vIf2SjadJpY7c

[@nerx2583]

15:34 are you able to just plug the 3 front fans into the radiator, and then the the radiator into the controller? Or do they both need to connect to the controller?

[@rmorenberg]

always informative thank you for your tutorials

[@TheProvokedPrawn]

So nice of you

[@yosserh656]

Loved the vid - and well explained - you earned a sub and a like - I'll be checking out your vids from now on - loved it!

[@doyolee]

Thank You for the Guide. I bought an iCue Link H150i for cheap on ebay but there will be no pwm cable (the thin cable @10:23 on your video) do i need it or can I control pwm without it? If I need it where can i buy One can't find anyone who sell this cable?

[@nanobreaker1128]

i bought the h170i and im a first time builder everything went really well but im not sure where i should be plugging my tach cable into my cpu fan or into my pump fan? i have it plugged into cpu but should it be plugged into pump?

[@javi9059]

I have to upgrade my 4000X to your 5000D case or bigger cause the smallest cable on the Radiator prevents the glass panel going back on.

[@DryUrEyesMate]

I purchased this kit to see if it was any better than my commander pro and the answer is no hell, no the commander pro has so much potential. You can add any fan from any manufacturer you can add any temperature sensor any USB header any LED lights you’re not stuck to one brand like you are with the icue link kit.

[@Alden_347]

Is it possible to use a y splitter to connect the radiator and front fans to the controller? Im planning on buying a 240 aio along with 3 front fans for my build

[@matthewgarvin1165]

Thanks for this detailed description, it really help alot!

[@TheProvokedPrawn]

Glad it was helpful! Hope you enjoyed enough to subscribe 🦐

[@Josh-b5b]

Hi Mr Prawn, setting this up in my first pc build along with the corsair 850rme power supply. The including hub for the aio has the sata cable but the power supply doesn't have one that it can connect to. Any help would be appreciated

[@saltyprocrastinator]

Very thorough and very helpful, thank you!

[@TheProvokedPrawn]

You're very welcome!

[@RachelWilliams-l2x]

Hi these fans look amazing question I'm gonna mount 3 side fans to how would I link them also?

[@alanpoet183]

i have a Kraken but i want to switch to the Icue RX fans, how do i connect them to the control panel. I have 3 front fans already with it so there is another spot to connect them. But how will I be able to tell the new fans "hey you keep an eye on the cpu cooler"

[@marksmales2204]

Did you install the side fans and then place the cover back on, on the inside?... I'm debating to do same thing and buy the Corsair RGB 9 set of the triangle lights. 😊

[@LauraTakesTheKris]

Great video and very helpful. I purchased the 360mm radiator and 4 fans. Everything appeared to have installed fine and RGB is working and the pump header shows the default cooler temp display, however I don't appear to have any display settings within Icue to change the display of the pump header. Ive powered off and disconnected the PSU overnight and also disconnected and re connected all cables but still no option to change the display on the pump. I have also plugged direct into a USB header on MOBO rather that using the provided splitter. Have you come across this issue at all and if so how did you resolve it? TIA

[@justoxalyde9122]

I plan on building my pc sometime this year (getting parts peice by peice. This lighting just might be the play (eventhough it cost alot)

[@Phoenixbrady86]

Am I wrong in think that if you buy the starter kit, the h150i kit and a single fan you should have enough cables to connect it all up without buying an additional cable?

[@TheMightyZuko]

@ 16:51 for my evga psu, that cable is labeled VGA I don’t have any labeled pcie. Would this go where I power my gpu (vga) or where it’s labeled peripherals on the psu?

[@Carlos-b7s5v]

Same here vga, peripheral or sata what adapter is that I got a msi psu

[@gabrielgabriel9779]

It's a big step forward but we are not there yet. We need a joint effort to make the "connections" already at the case and a new plug in the motherboard that receive device ID, RGB, PWM and Tacometer and power out. At the case one single plug would plug at this new mobo plug where we control fan RPM/profile, RGB lights, pump, etc at a software level. System wide compatible with any fan/pump/etc using this new standard.

[@rudboy8359]

Hi i need your help, i have buy the watercooling h150i Lcd but i have a asus tuf gaming power supply. Where can i find the adapter for connect the watercooling plug to the power supply unit ? Thank you.

[@themendomethod7613]

Does the power cable and motherboard cable come with the kit or do you also have to buy that separately?

[@richardg6949]

What was the 3rd cable that gets connected into the hub? Is that a MB supplied cable? Its a 2 pin connector.

[@nazimiskandarshamaruddin1713]

can we just use a single cable connecting all the fans(lets say 10 fans) and just daisy-chain and then to the controller? plus on the h150i hub, is the usb connector necessary as if we already connect to the motherboard usb from the controller?

[@TheProvokedPrawn]

In theory yes

[@yapchagi]

so it's still connected with 4 screws making it hard to remove from the case or radiator for cleaning purpose.

[@mit1s]

Hello, thanks for the great video and explanation. Are the fans quit? Because i want a system with less noise.

[@TheProvokedPrawn]

That really depends on the case and how hot your system gets tbh. They can be quiet but not at full speed but that's the same with any system

[@therealforestelf]

can you install these fans on top of the radiator in a pull configuration or will they touch the top of the radiator then?

[@Ruiso7]

Hope they make a custom cable to power the controller directly from their PSU. Like I don't like using one of those cables that have a pair of 6+2, like the one shown in the video...

[@oliverpatchett7607]

What a great guide - thanks so much!

[@TheProvokedPrawn]

Glad it was helpful! Hope you enjoyed enough to subscribe 🦐

[@rmorenberg]

I'm going to do my build in a Antec P20c case I hope all the fan connectors fit in that case

[@timoteoheinrichs]

I was planning to get a Kraken elite 360 but change the fans to the QX120 fans, how do I do as you can't buy the little cable that goes to the cpu_fan header separately and therefore there wouldnt be a cable connected to the header

[@maciekwar]

small update, in my qx12 rgb starting kit I got one short 90 90 degree cable, and one long straight 90 degrees cable. so they listened to the feedback :)