Robot for Kids | Learn how to make DIY Otto Robot | Ut Go

[@Shiv91126]

Very nice video sir❤. Waiting for Bluetooth controlled otto robot video 😊. Thank you so much sir

[@UtGoTech]

Sure I will make the Bluetooth Controlled Otto.

[@OttoDIY]

great video!

[@UtGoTech]

Thanks

[@juanitoeldronero]

Una consulta, si agrego algo nuevo que haga el robot, pierde lo que tenia anteriormente? quiero uno pero no se como se usa, quiero que baile al son de las canciones ¿se puede con ese mismo Robot? :) que "escuche musica y empiece a bailar o asi, si si se puede saben donde puedo mirar como se hace :O, muchas gracias

[@UtGoTech]

If you replace the code then definitely it will lose previous moves but if you modify the code I have used and add the moves you want then uploading the code will retain the old moves also.

[@icezone3822]

Where to get this material please tell i have the cardboard body which breaked down while joining the pieces

[@UtGoTech]

You can get it online in Amazon

[@UtGoTech]

We are trying to provide parts in India. If anyone from India wants to get the parts then contact me.

[@alaincaris6436]

Merci. Mais je ne n'ai pas la même tête que ce modèle, mais excellente explications.

[@UtGoTech]

Thanks 👍

[@srihari1992]

Good 👍

[@UtGoTech]

Thanks🎉

[@srihari1992]

​@@UtGoTechplease sir make solar flower project with LDR& ardino

[@UtGoTech]

Do you have any design suggestions? Please share with us through Instagram.

[@mcduffchannel]

Really clever, I love it!

[@UtGoTech]

Thanks ❤️

[@manishaher5350]

this is a great project. Can you pl share the auto center code for servo pl. also pl share link to download all the codes and do we have to make any change to the code or upload it as it is? thanks and appreciate

[@UtGoTech]

Yes, sure🤖 drive.google.com/drive/folders/1B1gTeydaGb0U7vTGabXF_w1qiffc97PI?usp=sharing You can also get it from video description.

[@abirzebiri4347]

OMG THANK YOU SOOOOOOO MUCH I did my examen and i get 189/189 !

[@UtGoTech]

Great👍

[@abirzebiri4347]

Thx !😊

[@abirzebiri4347]

i tested, its working !

[@UtGoTech]

Nice👍

[@abirzebiri4347]

Bro i recommented this Channel 🎉🎉 im sub and i like 👍

[@UtGoTech]

Thank you so much👍

[@Neil_123]

Lithium polymer battery Should be of what capacity In Volts ,Mah Please Reply

[@UtGoTech]

You will need 2S Lithium polymer battery Pack. Minimum capacity of 2000mAh

[@abirzebiri4347]

Its working if me have a piezo buzzer and a Mini toggle switch?

[@UtGoTech]

What you want to add?

[@abirzebiri4347]

Piezo electric buzzer and a mini toggle switch ON - OFF

[@UtGoTech]

I have added both in this project

[@abirzebiri4347]

Yes? 😅

[@romelinedelacruz172]

Can you give me the file for 3D printed parts of the robot, i cannot order it from Amazon

[@UtGoTech]

It's easily available on the internet and on the official Otto website.

[@manishaher5350]

bro, this is a lovely project, i did everything exactly what u mentioned, just that im using 9Vold battery. i could even upload the code, but when i start the otto does not move at all!. can u help me

[@UtGoTech]

Check battery voltage

[@manishaher5350]

@@UtGoTech how much should be the ideal voltage?

[@UtGoTech]

I suggest you to use 5 volt to 6 volt

[@UtGoTech]

I suggest you to use 5 volt to 6 volt

[@batStelko]

Can i download the 3d model printer stl files from somewhere? Regards

[@UtGoTech]

Yes you can. It is easily available on the internet.

[@SharminAkter.]

Can i Change the 3d model design of outside?

[@UtGoTech]

It's easily available on the internet.

[@SharminAkter.]

I unloaded the auto center code but it says error,failed

[@UtGoTech]

Yes

[@UtGoTech]

Check upload settings

[@SharminAkter.]

​@@UtGoTechi kept them outside..I'll try but wilk the prblm solve

[@chinmay-arts7800]

Sir please make otto robot with the use of animated oled display like emo robot and give code for programing in pin comment

[@UtGoTech]

Ok I will make one.

[@chinmay-arts7800]

Thank you sir

[@chinmay-arts7800]

Thank sir

[@chinmay-arts7800]

I doubt is here

[@chinmay-arts7800]

The doubt is I have 3v battery you use 3.7 v battery

[@boncukcolakel]

Hello, I built this robot as you described, I just installed normal batteries as batteries and loaded the codes, but the robot does not walk, it does not dance, its legs close on its own, it opens, it turns left and right, what can I do? Can you help me?

[@UtGoTech]

It seems that the microcontroller restarts due to voltage dips. The possible reason for the voltage dip is use of normal batteries. I suggest you use a lithium based battery.

[@boncukcolakel]

@@UtGoTech Actually, my friends did it with normal batteries. my problem was like in the codes. After I wrote the servo code you gave, it said the installation was completed, but then it gave an error but I didnt't care , then I uploaded the code Otto Blockly, after running it, it became like this. I wonder if this would happen again if I uploaded the codes to a new Arduino Nano. And I wasn't wearing a buzzer, it has nothing to do with that, right?

[@UtGoTech]

No issues not having a buzzer. Try calibrating the servo motors.

[@boncukcolakel]

I asked a lot of questions but how can I calibrate it?

[@UtGoTech]

You can use the example calibration sketch that comes with the library.

[@AKRAMMOHIUDDINF]

What type of programer is used in Arduino ide

[@UtGoTech]

Look for AVR MkII

[@vimukthiarosha5208]

bro while uploading codes in otto blocky thus error msg comming "Error: spawn C:\Windows\system32\cmd.exe ENOENT " what is the reason for that?? Bro i need a quick reply for this😔

[@UtGoTech]

DM me full error in Instagram

[@Codept1402]

Very nice Sir, Please tell rington name in 16:00

[@UtGoTech]

Mission impossible 🔥

[@abirzebiri4347]

🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥

[@UtGoTech]

🔥

[@_adhi_v3_x_22]

How many cost total

[@UtGoTech]

Around ₹1000

[@Neil_123]

instead of 16340 battery , 18650 battery can be use

[@Neil_123]

Please reply

[@UtGoTech]

I think the 18650 battery will not be accommodated.

[@Neil_123]

18650 , 16340 batteries are same to give same output, they are same

[@Neil_123]

Please reply

[@UtGoTech]

They are the same but with different sizes and capacities.

[@abirzebiri4347]

Cant you create a laptop with carboard ( thats working Pls )

[@UtGoTech]

😄😄😄

[@abirzebiri4347]

Yes or no i ame big fan to you maybe you cant make this one for me…😅

[@UtGoTech]

🤣

[@abirzebiri4347]

No…😢

[@UtGoTech]

@@abirzebiri4347 That will be too fragile.

[@Magestic_Flame__08]

I want to buy full kit can you help me to buy.... Pleaseeeeee

[@UtGoTech]

What help do you need?

[@Magestic_Flame__08]

@@UtGoTech I want to contact with you for this project

[@UtGoTech]

You can contact me through Instagram.

[@AyushFiction]

What is the voltage of the battery 🔋?

[@UtGoTech]

One lithium-ion battery of 3.7 volt is used in this robot along with a step up voltage regulator which increases the voltage to 5 volts.

[@AyushFiction]

@@UtGoTech Thank you!😄 Can we use 4 pcs 1.5 volt battery? The battery is in this video - kzbin.info/www/bejne/ap3OfZZ6nLuqiposi=D0eTXEtfVVhs36x8

[@UtGoTech]

No. 1.5 volt AA batteries will not work. You have to use Lithium based battery.

[@AyushFiction]

@@UtGoTech from where should I buy? is it available in Amazon

[@UtGoTech]

Yes, you can get it online store. Look for 16340 Lithium ion battery

[@Nakshvishwakarma1]

Sir where is code

[@UtGoTech]

You can find it in the example sketch of the Arduino IDE.

[@abirzebiri4347]

What its your buzzer ?

[@UtGoTech]

I have used 5 Volt Passive Buzzer.

[@megankoss]

P R O M O S M 😞

[@UtGoTech]

Sorry I didn't understand what you said

[@abirzebiri4347]

Me too 😅😅😅😅😅😅