Rode NT1a vs Audio Technica AT2020 - Probably the Best First/Budget Microphones To Be Honest

[@AudioHaze]

Hi friends! If your lifelong quest to find the perfect microphone was finally satiated by this video, these two amazon affiliate links give me a small percentage of the sale, its a really great way to support the channel. If not, I wish you well on your continued quest towards audio bliss. Amazon: NT1a - amzn.to/3sojfoY AT2020 - amzn.to/3tRMYXA Sweetwater: NT1a - imp.i114863.net/EaYv22 AT2020 - imp.i114863.net/yRxQW3

[@geniussnake497]

Audio bliss? * Laughs in audiophile *

[@Mamarentiana]

I wish she would also record with the Neat King Bee II. There is no raw female voice with it on KZbin.

[@NetsuGhost]

Thanks for this video ! I was planning on getting a AT2020 for a long time now, but seeing so much singers and producer using the NT1a made me hesitating to pick both at the same time. Your video made me prefer the AT2020, much cleaner and with less low (I have a deep voice so no need for too much low mid) and less "room". The NT1a is definitely more sensitive and with more definition, but its not what I'm looking for, so thank you for clarifying my choice x) ! Great Video !

[@AudioHaze]

Glad I could help you make your decision! Yeah I was genuinely surprised when I heard the AT2020, super super good microphone and hits way above a lot of its competitors :)

[@eros6421]

all my nt1 did was pick up background noise!

[@Tuhnytte]

Ok

[@jasonbodden8816]

Both of these mics are superb budget mics and bat way above their price range. I do think that generally the NT1a edges it out slightly with its warmth because of the more forward low end to the sound. I kind of like that the AT2020 doesn't have that much of a bass file as I think it'd be easier to EQ, starting from more of a blank canvas. It has less "color" to its sound. But if one didn't have the extra $130 for the NT1a, with minimal EQ-ing I think you can get the AT2020 to sound very close or identical to it. I bought the AT2020 but not too long ago gave it to my teenage godson (19) who has a really small home studio setup and wanted to upgrade from recording with dynamics to a condenser. Before even knowing that I owned one, he mentioned that he was thinking about getting the AT2020. I pulled mine out and said "Merry Christmas, bud." He was beyond thrilled, to say the least. And just the other day he told me he tried it and loves it :) All in all, for me, the NT1a has a slightly better sound but anyone, especially if you're now starting out, would fare just as well with the AT2020 :)

[@_Summer.]

That song/voice was GORGEOUS.

[@AudioHaze]

I'll let her know!

[@casscars3405]

My AT2020 just came in. I was afraid a made a mistake and it wouldn't sound good vocally but this video definitely gave me more confidence in it! Hahah excited to try:)

[@AaronCarrington]

I can certainly vouch for the Rode NT1A, it was my go to for years recording vox and acoustic guitars. Certainly a brilliant first mic 👍

[@AudioHaze]

Absolutely! So many people here use it at uni here, its the go to for most students :)

[@chinor3999]

How is it for drum overheads

[@specialkcitizen6263]

I would like to suggest you treat the vocals with some compression and EQ (but not for talking). We all compress and EQ vocal recordings and the treatment will also bring out the DNA of the mics sound so that we can hear them in a real world situation.

[@matthewhoey3058]

my final verdict, at2020. simply put, i went to the vocal test, closed my eyes, and i couldn't tell a difference. i thought it maybe was going to be 1 mic full song, then the other. when i open my eyes i was shocked to see the microphones were switching xD (btw i almost fell asleep with that beautiful singing)

[@Davide_LP]

same happened to me with the guitar test :)

[@AudioHaze]

Haha glad I could help you make the decision!

[@AlexPavlovic]

It's quite audible that Rode NT1a has more mids, which in my opinion makes it sound a bit boxy, mids are way up in front of other frequencies... so the blind test was quite easy

[@AudioHaze]

I think the mids in the NT1 is exactly what I like about it personally

[@joshuaharrover3205]

I love the AT-2020, I just recently purchased one from Amazon, it is an amazing mic. Also, I didn't have enough money for the Rode NT-1, so that $99 price for the AT-2020 really is a magic number for me, it helps.

[@AudioHaze]

Its a great mic! Enjoy it, definitely good bang for you buck :)

[@hoangchip143]

Hey man what interface did you buy ?

[@HarvinderSingh-yy8th]

Upgrade later.

[@DevKumar-kn1wm]

I purchased AT2020 usb- after few months (Dec-June) it started giving electronic burning smell.

[@travisshaw3866]

I already own an AT2020 so the mic question is a moot point for me, but I wanted to say I liked the song you all performed! Your guitar sounded good, and I like the chord progression you played. The lyrics are nice, especially that last line, "what if this world were made for two, just not for us?"

[@michaelrice6620]

Trust me the nt1a is a much better mic than the at2020! Not that the at2020 is a horrible mic if i was doing a podcast or videos like hes doing i would use it cause its cheap and sounds decent but if were talking music it just sounds thin and has this metallic sound that i always say cheap Chinese mics have. Kind of like this tin like sound in the highs thats hard to get out and if your voice. The nt1a isnt perfect but for the price with a little eq you can get a great sound that will cut through the mix.

[@lionelwatkins]

Well said. I was dealing with that on my AT2020 but now I use a MXL 4000

[@bernardopessoa5132]

You're right, i have the at2020, and my vocals have an artificial sound to them. It gets quite obvious when i apply compression.

[@namede6210]

When it comes to vocals, I kinda think that the AT2020 sounds a little compressed while the NT1a sounds more open and airy. But when it comes to guitar, the NT1a seems to be a little more sensitive and able to pick up the warm sound when hitting the bass strings, while AT2020 sounds a little more clear with less "warmness". Both are great mics. Both sounds really good. I don't actually prefer one over another between these 2, but as someone who has just started to make song covers on KZbin, I really can't decide whether should I spend an extra $130 just to get some subtle differences.

[@AudioHaze]

Compressed is a good way to describe it, really solid midrange too. You're right, simply a matter of taste I think :)

[@G.Man-]

I preferred the AT2020 on vocals & NT1a on guitar. What did you end up getting?

[@namede6210]

@@G.Man- I end up getting the AT2020. It's a great mic overall in its price range but can sound a little harsh if the high end is not properly taken care of. I would say if you have the budget, go for the NT1a. The NT1a is a quieter mic and sounds better in most cases.

[@G.Man-]

@@namede6210 Thanks for your insight, i can't handle harsh sounds these days, i've heard a hell of lot more harsher mics than the AT2020 though... If it was still available, i would've gone with the Oktava MK-012 Stereo Pair full set.

[@jasonbodden8816]

@@namede6210 Both of these mics are superb budget mics and bat way above their price range. I do think that generally the NT1a edges it out slightly for the reason you stated but if one didn't have the extra $130 for the NT1a, with slight EQ-ing I think you can get the AT2020 to sound very close or identical to it. I bought the AT2020 but gave it to my godson who has a really small home studio setup and wanted to upgrade from recording with dynamics to a condenser and just the other day he told me he tried it and loves it :)

[@ijigloo7747]

I hear the difference but it’s not enough for me to spend the extra $130 the at2020 comes with everything in a bundle under $110 it’s a reasonable first microphone

[@AudioHaze]

Its true, and the AT2020 is one hell of a mic in the first place :)

[@heatheranne9657]

I can hear the difference with the thicket capsule on the Rhode

[@HarvinderSingh-yy8th]

NTIa bundle is best. You get everything. Think again. Moreover NT1a is mic with bright and deep vocals.

[@samrt-boro]

Nope , the rode is much clearer and it picks up the low bass much better.

[@michaelrice6620]

Trust me the nt1a is a much better mic than the at2020! Not that the at2020 is a horrible mic if i was doing a podcast or videos like hes doing i would use it cause its cheap and sounds decent but if were talking music it just sounds thin and has this metallic sound that i always say cheap Chinese mics have. Kind of like this tin like sound in the highs thats hard to get out and if your voice. The nt1a isnt perfect but for the price with a little eq you can get a great sound that will cut through the mix.

[@mira.almuti]

You did an amazing comparison, tbh I thought your account had 100k subs minimum. Your videos are amazing and very informative, THANK YOU!

[@AudioHaze]

Ah thank you so much!! Means a lot :)

[@Firstinversion899]

Excellent job! Better comparison than many of the others. Well-presented, too.

[@AudioHaze]

Thank you so much for saying that!

[@Kevin-nr9lj]

Thanks for the video. I think I'll go for the Audio Technica AT2020

[@AudioHaze]

Enjoy it dude :)

[@kelp2115]

istg when I have been watching your vids in the past two days, I thought ur some KZbinr with around a couple thousand subs, damn you have very well made vids for a channel with 300 subs, u deserve more subs, and your gonna get them lol

[@AudioHaze]

Aw thank you so much!!! That means a lot, with enough work hopefully I will :)

[@udensiukaoma2686]

@@AudioHaze yeah man you’re really underrated taking into consideration the quality of your content. Keep it up!!!!

[@ClassicalRomance]

I nailed the guitar blind test. AT2020 absorbs less low frequency from the shockwave of strum. The test that I was looking for.

[@AvisBoone]

The singer is superb! Beautiful voice! Oh, and great video...hahaha...No, I appreciate the depth of the comparison.

[@AudioHaze]

Thank you so much! I try my best :)

[@urbnctrl]

I have both, and I have a Neumann. Honestly when recording with most clients I use the AT2020! However, the noise leveling on the NT1A is AMAZING! Why choose when you can spend your hard earned life savings on both?!

[@audiosounddoctor5834]

which neumann you have?

[@urbnctrl]

@@audiosounddoctor5834 TLM103

[@bf4lvr]

If I wanted to mix vocals like this, which one do you think would be better? kzbin.info/www/bejne/hqrFfp6dqbyNrqc

[@audiosounddoctor5834]

@@bf4lvr This video is not available

[@bf4lvr]

@@audiosounddoctor5834 oh my bad, well the name of the song is “ice queen” by “baekhyun”, im sure it will come up on youtube if you search it

[@DanStormVO]

Thanks for this comparison. I currently have the AT2020 and was considering upgrading to the Rode, but seeing this it seems like more of a sidegrade. The Rode certainly sounds warmer because of the bass boost, but I currently compensate for the 2020's lacking bass in post. Anyone got any recommendations for a substantial upgrade that won't completely break the bank?

[@AudioHaze]

If you're looking for bass, this may not be a good recommendation, but the Lewitt 440 Pure is my favorite mic in this price range, its brilliant (but very bright)

[@p4493]

different mics are not gonna give you a big upgrade unless you go to big prices... you should have in mind that preamps have the same (or even more) importance than microphones.

[@aaawwweeee]

AT2020 is slightly muddy and grainy, but the difference is so small and for the price it's incredible.

[@thirdthirteenstudio]

Hey, I like the blind test. Bcs what i really need is the sound, not what brand it is or how muh price it is. So now I go for AT2020! Tq bro

[@AudioHaze]

Glad I could help!!

[@okystazz]

I use at2020 too.. For me the at2020 is more sibilance frequency then other entry level mic with same cost. But sometimes this mic really good with singer who have a deep/bass vocal sound.

[@AudioHaze]

It does do well for lower voices I agree

[@ekoprabowo8493]

yes. i have deep voice. i use at2020. this mic amazing for recording my voice. they said my voice vibrating their bodies.

[@CUBEoneVX]

The Rode captures more echo from the room.

[@AudioHaze]

I think its all the high frequencies the rode has

[@Mohit-gg2vd]

Leave aside the mics , What a beautiful voice and music of the female singer... . I am feeling happy 😊😊😊

[@AudioHaze]

I'll let her know!

[@stephydae]

Nice singing, beautiful voice... i was in a different window, when she started singing, i quickly switched and watched her singing.. 😍

[@AudioHaze]

Thats so nice!! I'll let her know :)

[@ShawnWilkieMusic]

Awesome Video.. I was on the fence about a purchase regarding microphones,and your video sealed the deal for me..

[@AudioHaze]

Glad I could help!

[@_karla._]

immediately subbed. everything about this video is just great.

[@AudioHaze]

Thanks so much!

[@arrianacorr]

I personally hate the Nt1a on my voice because to me it is too tinny heavy on the high end and airy and I have to EQ it out which ends up damaging the natural air in my voice. I think it has more clarity which is nice but it annoys me for some reason.

[@AudioHaze]

I think that can happen sometimes! It's always so hard because it varies from person to person. One person's high end sounds great while another doesn't. I'm sorry its not for you! You'll find your mic eventually :)

[@shyshyalt]

try speaking closer to the mic or use de-esser

[@matvii_orchestra]

Thanks. I was looking for a mic for voiceacting, because my fifine 669k is really bad for screaming. You got a like from me!

[@eliotball655]

beautiful sounds that you have!!

[@AudioHaze]

I try my best :')

[@singwithaifamily2039]

@@AudioHaze sir super explain thank you

[@jdhd999]

Just scooped a NT1-A because it was on sale for 199$ CDN and I already owned a AT2020. I also own the AT2050 and honestly all these mics sound very much the same with no processing on them. (AT2050 being a smidge better control wise with switches on the microphone.) A microphone is only as good as the tools it's connecting to. If you don't have studio equipment or software/DAW plugins to match the microphone. You're never going to get that sound for live feedback. A lot of quality comes down to sound processing and not so much the microphone itself.

[@farawaykin]

Great video! I'm trying to pick a mic right now, and it's so frustrating! After this vid I'm definitely liking the sound of the NT1A more, but also it currently costs more than twice the price of AT2020.Why:( It's not like it's better more than twice, maybe like 1.5 times max!! And I'm now totally lost... Help.......

[@AudioHaze]

Hahaha well if you like the sound of the NT1a, you could always try the used market! the Lewitt LCT 240 Pure also has a similar sound and maybe be more affordable in your area :)

[@solei5678]

AT 2020 sounds warmer to me, the NT1a has a clarity to it that I really love in vocals specifically.

[@LapisDemon]

Hello, great comparison, I like the "deeper fullness" of the AT, but also the "clarity" of the NT1A.. wish they'd have a baby ;) As for the Audio Interface: 2014, I bought the sE Electronics USB2200a, a USB/XLR-hybrid condenser microphone that harmonizes very well with my voice - it was hard for me to find a mic that sounds good for my voice. However, it's only "Plug & Play" on Windows 7 and below, not on Windows 10 anymore.. no driver support, hence I've got to buy an audio interface. - Any recommendations which audio interface sound well with female voices? Majorly voiceover, but also sometimes singing. Thank you very much in advance! Meri

[@AudioHaze]

Hey Meri! In my experience audio interfaces all tend to be pretty transparent, so they don't have to much of a tonal characteristic on the input except if you were to put an emulation on it (like the UA interfaces do). So, for me I always value interfaces with plenty of clean gain. For voiceover, Audient has been a go to for many of my colleagues. Give those a try, Mike from Booth Junkies swears by them!

[@DWHarper62]

They are both bright but the AT2020 high freq. are harsher than the NT1A, with some sibilance definitely coming through on the AT mic... Can you not move the mic stand along with the mic to get proper placement of the AT mic? Doesn't make sense... I called the correct mic on the test... Listening through Audient ID14 interface with Kali LP-6 monitors (room corrected)... And get the Rode NT1 if you are looking... warmer and better all around than the NT1A...

[@JoshuaHarrover]

I love the AT-2020, I use that and an SM57, and I couldn't be happier.

[@biggerthanhiphop7641]

I never knew how bad my at2020 was until I got a Nt1 ... The difference might sound little on youtube videos .. but when u get your hands on a nt1 u can tell the difference immediately

[@AudioHaze]

I think it depends, there's definitely a quality jump but the AT2020 honestly can sound really good for broadcast and spoken word.

[@44slowmou.]

Could you make a video comparing the at2020 vs at2035? Im about to buy an at 2035 but now I saw you comparing the at2020 with the rode Nt1a. The thing is the 2020 is like 70 dollars cheaper than the 2035 in my country. Which one would you recommend to me? (Sadly the rode is over budget)

[@44slowmou.]

I want the mic mainly for (rap/trap) vocals

[@AudioHaze]

I would just go with the AT2020, they have very similar sound profiles, you're just missing a low cut and a pad which isn't really necessary when you're just starting out :) if you're interested, I have another video on the channel comparing the NT1 vs the AT2035, maybe you could open both vids in two tabs and compare the AT2020 sounds and the AT2035 sounds? I can make a comparison but it wouldn't be for a couple weeks unfortunately!

[@44slowmou.]

@@AudioHaze Thanks for answering bro!!! I like your videos, and I already watched the at2035 vs rode nt1 hehehe. Incredibly the At2035 sold out here, so and taking into consideration your opinion I think my destiny is to buy a at2020. Thanks again and keep doing what you do, pretty helpful content and you're funny.

[@44slowmou.]

@@AudioHaze although and just out of curiosity, at2020 or behringer b1? and at2020 or behringer b2 pro? hehehe

[@AudioHaze]

@@44slowmou. AT2020 all the way, I have my issues with Behringer although their products are solid. But yes, AT2020 1000% :) and glad you like the vids dude! I hope they're helpful at least a little

[@Eren-O]

thanks for this video, you made it clear for me to buy the rode instead of the at2020. the at sounds more for a podcast compared to this rode. thanks again!!!

[@capecrusader5389]

Nice test on this 2 mics...for my taste they actually sound THE SAME...from scale of 1-10 ,..rode is 10 and AT is 9..so for me its a wise choice to choose the lesser priced mic for an equally sounding performance against pricey mic like the Rode... atleast to my ears..the female vocalist can tell it is really sound the same.....in eyes closed....

[@AudioHaze]

If they sound similar for sure go with the cheaper option!

[@abrahamliu2471]

My voice is much closer to baritone and bass, rather than tenor. NT1a, NT2a, AT2020, which one will you recommend? Besides, I sometimes record guitar as well, for recording guitar which one do you think is best one?

[@AudioHaze]

Well, of these three I think the AT2020 would definitely accentuate that low bass more, if thats what you're trying to accomplish :)

[@abrahamliu2471]

@@AudioHaze Dear AudioHaze, thank you. However, if I would like to record whisper, which one would you recommend?

[@AudioHaze]

@@abrahamliu2471 hm, well they’ll all be pretty sensitive, but my gut is to say NT1a because of its high end response, it I’m really just shooting in the dark without testing it so

[@abrahamliu2471]

@@AudioHaze Thank you, I finally choose NT1a based on the same reason as yours.

[@dumdumbrown4225]

This is comparing apples to oranges, mate - the AT2020 isn’t even a large diaphragm mic - it really is meant for instruments or low-end applications but is sooo good at punching above its weight that some people use it for singing/vocals. To do this right, you’d need to compare the Rode NT1/NT1a with at least an Audiotechnica AT4033a, AT4040 or higher… also you *must* note that Rode’s self noise is measured in dB-A whereas Audiotechnica measures self noise in dB-SPL - you would need to subtract around 6 or 7 from the AT2020/2035/4033/4040’s number to compare it to any Rode NTxx numbers. Rodes are expensive because anything made in Australia is more expensive …even instant coffee 😂 although I do think all Rode equipment is pretty well made by us Aussies. That’s why we’re confident about a 10-yr warranty, for sure.

[@JohnDoe-tm1rv]

I clearly see the difference and AT2020 is little bit better for me

[@AudioHaze]

Nice! I think I’d agree for most recording scenarios

[@chrismengos8379]

Nice review and voice! I play violin , viola and harmonica. 1) Which one would you recommend between NT1a and AT2020 for my setup? 2) Some other thoughts are the AKG C214 and the Blue Spark. Between these four microphones, which one do you suggest for my setup (or if you have anything else to suggest)? Thank you

[@AudioHaze]

Actually the AKG 414 is famous for recording strings, and seeing as the 214 is its little brother, I would give that one a shot :)

[@chrismengos8379]

@@AudioHaze Τhanks! If I had to choose between the NT1a and AT2020, which one would you think will work better?

[@daliproductioneurope]

​@@chrismengos8379nt1 a

[@garrettwerdall7554]

Ayeee I’m the 1000th sub, thanks for this video it made me decide on a mic!

[@AudioHaze]

Garrett!! My dude you made my week!! I have a little video prepared for next week to celebrate and I'll mention you in it. Welcome to the channel man :)

[@garrettwerdall7554]

@@AudioHaze I’m glad man I’d be honored 🤙 and congrats

[@KittiyKyat]

Damn. I thought for sure I liked the AT2020 listening to you speak...I felt I heard way more echo in the room with the N1. But the singer's voice sounded better with the N1...I'm still torn. Looking for a VO mic.

[@IMANNO]

The Rode Nt1A is warmer, idk how to explain, and I'm living in Germany, the Rode cost 160€ & At2020 is 90€. As Rode box have useful accessories, i chose it, cause i have to pay 40€ extra money to work with At2020.

[@viltmusic7813]

Im a independent artist (rapper) and im in a budget which do u prefer rode nt1 or at 2035.

[@AudioHaze]

You won't be disappointed with either! I just checked out the song you've posted, I'm kind of shooting in the dark here, but I would probably try the NT1. I think it may suite your voice better, just a guess though!

[@priiigrover105]

hey! so I have a lot of mid and low end in my voice and less treble. I would say my voice is a lot like demi lovato, but a little less treble. Which one do you reccomend?? Please respond soon. thank you in advance!

[@AudioHaze]

Its never the easiest to recommend a mic without hearing your specific voice, but I tend to recommend the AT2020 for low/mid range voices, so I would give that a try :)

[@priiigrover105]

@@AudioHaze thank you so much. Also I have an sm58 and it makes me sound dull and the mid in my voice doesnt sound full. So like i was thinking of switching to a condenser that gives a brighter and fuller sound. hopefully AT2020 does the job. Thank you for repying!

[@AudioHaze]

@@priiigrover105 Yeah any condenser will sound brighter! Some more than others, just watch for room reflections more with condensers :)

[@limo9402]

Yep the rode is a better mic between, these two mics no cap but the at2020 is not bad it's really really good for me these two are the best budget mics for vocals and music production that really, sounds good! Wow top 2 mics for me not talk about other mics

[@AudioHaze]

Nice! Yeah plus they just have super different sonic characteristics, so they can fill different niches :)

[@jimwally6121]

So clear thank you for the info

[@daksh6049]

wait so which one's better for a shrill voice (or towards the higher side) (for a rapper) (also I prefer a lil deeper output than what my voice actually produces so yea which one should I pick)

[@AudioHaze]

If you want to make a shrill voice sound a bit more solid, I would reach for the AT2020, but that is of course a generalization

[@MarcusV741]

I am so undecided.. I'm gonna use it with my vocals and acoustic guitar.. and I prefer At2020 on voice and Nt1a on acoustic guitar. But I can only buy one

[@AudioHaze]

Which do you care more about? Voice or guitar? I would imagine if you're singing you should prioritize voice!

[@MarcusV741]

@@AudioHaze I bought AT2020 and not happy with it. I have to up my gain to be able to cut thru my mix. Surprisingly I prefer the Focusrite mic than this. At least with my voice ..and I don't need to up my gain with the Focusrite mic. Same with the acoustic.. Although I am still not quite satisfied with the Focusrite.. I will return the AT2020 and try the NT1A and hopefully it will be the one.. thanks for the response..

[@paulhknight]

I thought the guitar mid-highs sounded more ringing with the 2020. I thought it was going to be the Nt1a, so I was pleasantly surprised when it was the 2020. I like a guitar that jangles. I could hear the extra airiness and warmth in the vocals, but its so marginal.

[@YungFrendi408]

Hey I just bought the rode nt1a & after reviewing comments about the rode nt1 I'm kind of curious whether or not I should return the microphone for the nt1 😭 i dont have the best of setups either

[@AudioHaze]

Hey! Whats the problem? Just don't like the tone? You'd get a more even, lower-mid range tone with the NT1

[@eros6421]

for sure return it mixing with the at2020 is easier than the nt1a way less deductive eqing in the mids/lows

[@bonbb3923]

Spl level doesn't mean that much as see it, my old mic which is Akg c3000 can supposedly take up to 150 db, but actually it reacts pretty badly to my loud singing (which doesn't come close to 150 db) and gets distorted. when at the same time the Neumann u87 spl limit is 127, but I'm sure it can take loud singing better than my c3000, although I haven't tried it yet. having a high spl limit doesn't nessecearily mean it will handle as much loudness as you would think, so it seems. it doesn't need to go, for example all the way to 144db(or close) to have unwanted distortion. also, my old Samson co1 has a spl of 136, so what, it means that it should react better to loudness than a U87? it's a terrible mic for any singing that isn't quite. it distortes too, too easily.

[@YoungSvyiQ]

Hello, between AKG P120 vs AT2020 vs Behringer TM1 / with a Focusrite Scarlett Solo 3rd Gen interface. - Which micro do you recommend?

[@AudioHaze]

I personally love the AT2020 :)

[@lostishere]

None of these are bad, I'd probably go with the P120 though

[@chickenicecream1942]

Hi, who is the vocalist? Do they have a channel?

[@SirSillyBumfluff]

I'd love to hear more of the singer and that song, I thought it was really nice

[@AudioHaze]

Maybe sometime in the future!

[@IMANNO]

Thanks for this useful video 🙏♥️

[@budgetkeyboardist]

I heard more air and crispness in the high frequencies in the Rhode.

[@dhrubapatgiri3986]

Little Crack or low voice which one will be best plz reply sir

[@AudioHaze]

I find the AT2020 is better for low voices :)

[@kylewilson4013]

Would the nt1-A be better for let’s say tenors (louder voices)?

[@zaimkarii1756]

Audio technica at2020 sound better than Lomo19a9 mic ?

[@AudioHaze]

not really sure! I've never tried a lomo mic, those are vintage aren't they?

[@zaimkarii1756]

@@AudioHaze Vintage soviet mic. Nirvana use lomo for drum I think

[@AudioHaze]

@@zaimkarii1756 nice dude, never heard it before but the design looks awesome

[@zaimkarii1756]

@@AudioHaze I love AT2020 but I want to try lomo19a9 just for fun.

[@dc37wwe2kmods]

Did you turn on the Air button on your Scarlett for this?

[@AudioHaze]

Hey! The Scarlett doesn't have an air button, it does have a pad and inst button for a couple inputs though

[@dc37wwe2kmods]

@@AudioHaze Thanks man!

[@richrhythms9179]

What's the best distance for vocals to keep from AT2020? Thanks!

[@AudioHaze]

Generally try to keep the microphone around 7-9 inches away from the vocalist on average :) closer for quieter parts, farther for loud parts

[@hiltonlavish7778]

Please can you tell me what's better Se electronics x1 a or Audio Technica at2020 I wanna see you some test cuz you're the one that I trust on KZbin

[@AudioHaze]

I don't have any experience with the SE electronics x1! But I just did a cool review with a bunch of microphones in my most recent video, and the AT2020 did extremely well, better than more expensive microphones did. They've proven themselves to be extremely good microphones

[@hiltonlavish7778]

@@AudioHaze thank you for your helpful answer, and surely I will watch this video keep up the good work

[@honestlygio7830]

Did you show how the RODE sounded beside with no vocals and quitar? If not that would be helpful. Telling the differences between the two mics helps though. Thx

[@AudioHaze]

What do you mean? Sorry I don't quite understand :/

[@itsallaboutlove9990]

Hello, can you recommend best studio microphone for a musician? Thank you

[@AudioHaze]

Its hard without knowing your voice and also your budget! It also depends on if you want a dynamic or a condenser. For lower end mics, try the AT2020, NT1a, and the Lewitt 240 Pro. For higher end mics try something like an Aston Spirit or the Neumann TLM 103. If you're looking at dynamics, I recommend the SM57 or affordable mics and the RE20 if you'd like to spend a little more. I really can't narrow it down without testing on your voice, but I love all the mics I just recommended :)

[@itsallaboutlove9990]

@@AudioHaze thank you so much. Actually, buying for someone and I wish to get something the artist would love and use, at the same time, not expensive. That's why I ask from you being more knowledgeable in this sector. Unfortunately, I don't know the different between condenser and dynamic. Thanks so much for responding

[@AudioHaze]

@@itsallaboutlove9990 A good rule to follow: If you're recording in a room without acoustic treatment: Dynamic If you're recording with acoustic treatment: Condenser. This is just a good rule to follow in general. Often times singers will prefer condensers though.

[@itsallaboutlove9990]

@@AudioHaze wow, thanks so much. Then I Will go for condenser please. Thank you so much for your kindness

[@ScrewballMcAdams]

Great video. Thanks!

[@AudioHaze]

Thanks for watching!

[@nagatouzumaki7265]

Hey, I'm actually very unsure about which mic I should get. I really want to get one to start recording but idk. Confused between rode and audiotechnica. I don't have a sound proof room, I have used rode nt1A in the past but I never felt like I could sing freely, even though I used that in the studio. I became very conscious and started to control my voice a lot. I couldn't try belting out or anything. My mom keeps telling me to get a good one no matter how expensive it is, but I want to be able to belt and sing freely...so is Audiotechnica the same in that matter?

[@AudioHaze]

If you want to belt in an untreated room, I think you need a dynamic microphone. A SM58 is a great cheap option, but if you're looking to spend some more money, I would check out the RE320 or the SM7b :) the dynamic mic won't pick up us much room reflections, and will be less sensitive to dynamic change, so you can go from regular singing to belted with less of a chance of clipping. I have a whole vid on Dynamics vs Condensers if you want to check it out! I also find I don't feel the need to control my voice as you mentioned on a dynamic

[@nagatouzumaki7265]

@@AudioHaze Thank you so much, it really means a lot!

[@cmalc8]

The Rode is great, if a little sibilant, but it's twice the price of the Audio Technica. I own the AT2020 because of it's remarkable neutrality. (and good price)

[@heathersky8218]

Hi! Thank you for a great comparison vid. May I ask, if I would like to upgrade from my Samson c01u pro, which one would u recommend. I use I to record vocal and make some cover on KZbin. Thank you

[@AudioHaze]

Hard to know without hearing your voice! For me, a deep voice, I would probably go with the AT2020, higher voice the NT1a

[@heathersky8218]

@@AudioHaze if I may, I would like to drop the link to my channel here, would love to hear ur thought. Thank you in advance

[@erciasico]

AT-2020, cheaper with great sound quality.

[@odiserv]

thnx I'll go for at 2020,

[@AudioHaze]

Enjoy dude!

[@boy6dragon7]

Thanks for sharing friend. I'm from Cambodia.

[@AudioHaze]

Hope you enjoyed it!

[@boy6dragon7]

AudioHaze yes sure

[@Soundhealing940]

Great video my friend

[@AudioHaze]

Thanks!

[@YouTubeDoxedMyRealName]

Well a jet engine is 140 dBA soo that or maybe incoming artillery that's way to close for comfort... LOL

[@mychess5821]

Amazon has been selling fake Rode NT1A mics ie. counterfeit. Plzz advice us as to where to buy authentic mics.

[@AudioHaze]

Sweetwater is always an option!

[@mychess5821]

@@AudioHaze Authentic right?

[@williams.5158]

Forgot about the mic test and was just lost in her singing.

[@gemini4682]

thanks for this video

[@em8969]

Brilliant video

[@AudioHaze]

Thanks!

[@clasesfernandoandres]

Beautiful voice and song.

[@AudioHaze]

I'll let her know :)

[@Matt-li6gn]

Beautiful voice.

[@44slowmou.]

Heeey nice video!

[@williammusicman]

nt1 (not the nt1a) i believe is the quietest. 4.5 vs 5

[@AudioHaze]

Ah thats true, both are extremely quiet though :)

[@Thebrokastv]

Hello please btw at2020, beringer b2 pro and takstar sm 10d wish should I go for

[@AudioHaze]

Depends if you want brightness (NT1a) or midrange (at2020) the choice is yours!

[@jsmith1899]

what are they running it through?? did not say.... even a cheap $100 mixer would even things up a lot.

[@AudioHaze]

This was running through a Scarlett 18i20 :)

[@user-pf8jj1uu1f]

I am upset that this video has no conclusion . I cant understand the sound difference from the video. You could , and tell us which one is better.

[@zwib]

Thank you!

[@AudioHaze]

Happy to help!

[@sgtqiqiz]

Can u tell me what is the title of the song?

[@AudioHaze]

Its called Empty the House but its not out yet, here's her insta though, should be a demo of it on there: instagram.com/mielfrade/

[@kayjay4952]

I make regular rap music that doesn’t have that much auto tune, on chicago drill beats and sometimes songs to play like carts type beats. So sometimes i need to rap really loud, and other times i need the mic to be sensitive enough to hear fast words. which would you recommend?

[@AudioHaze]

Well, I think these will both have similar responses to dynamics, its more a matter of tone. I think the AT2020 is a much more solid, thick tone which may make your voice naturally more beefy and solid, while the NT1a provides more high end response which will make your voice brighter. If you want something that hands extreme dynamics better, a dynamic mic may be the way to go though.

[@hiltonlavish7778]

I wanna hear your opinion which should I go for in one of these recording vocals and rap?

[@AudioHaze]

I would say a good really to follow it to go with the AT2020 for lower voices, NT1a for higher ones. I'm really generalizing though, It depends a lot on your voice

[@hiltonlavish7778]

@@AudioHaze most of the time I record low raps like rnb and chill trap stuff like this you know so I think I need at2020 but it seems like everyone is saying rode is better overall for 10 year warranty and low noise

[@AudioHaze]

@@hiltonlavish7778 yeah that’s fair, quality wise I think the NT1 is better than the AT2020 BUT I think the NT1a might be about the same quality. Here check out this other video I made (not to self promo or anything) but I think it could really help decide: kzbin.info/www/bejne/boTSnYOlZ8aAfbc

[@hiltonlavish7778]

@@AudioHaze thank you bro for your helpful answers and I hope you do self promotion you're deserve it I swear you put too much effort I wish you all the good luck 🙏

[@AudioHaze]

@@hiltonlavish7778 Thanks so much dude! So far the growth has been good naturally, but maybe I'll do some promo in the future :)

[@VishalWankhedeMusic]

I just loved it

[@AudioHaze]

Thanks man :)

[@cavidhummatov4431]

It's hard to spot the difference listening to the female voice as these mics are famous with sounding better in low mid ranges.

[@ModManJam]

What audio interface are you using here? Ty

[@AudioHaze]

Scarlett 18i120 :)

[@SacWebDeveloper]

In my opinion, NT1A > AT2020, but NT1 > NT1A.

[@AudioHaze]

I would tend to agree, but there are circumstances where I would prefer the AT2020 actually :)

[@jzzz123]

@@AudioHaze like what kind of circumstances?

[@earjwee]

AT2020 smokes the Rode..

[@iAutodidact]

The joke’s on you, I’m using a dongle to plug my ATX50s into my phone!

[@AudioHaze]

Darn it!!