Rode PodMic USB Review with Comparisons - MV7, SM7B, Profile, XDM100

[@Laszlo-Szabo]

In my use the PodMic beats the MV7. I also like its USB-C a lot more. I am happy for Rode pushing the envelope because Shure - despite being the industry standard, is not delivering what I expect from them.

[@dwilson1usa]

I am just starting out as content creator/reviewer and really appreciated the information provided. I have purchased 2 Rode PodMic as my starting microphones with the RodeCaster Duo so I feel I have the complete setup for in-studio and remote locations when using my computer. It was great to see all the mics compared along with the top of the line Shure SM7B. Maybe when I get better in production I will move up to the SM7B.

[@adrianomoreira1341]

Excellent comparison, as always. I have a Shure Mv7 and I think that, of the microphones presented, it really competes directly with the PodMic USB. The sound is similar, the functions, the size. The Mv7 has some small advantages such as the layout of the command buttons (volume, headphone volume), the simplicity of the software, etc. But these are aspects that are not critical for use, things that are compensated by the excellent price of the PodMic USB. If I didn't have the Mv7 I would absolutely buy the Rode. A great option for what it offers. Now I need to mention: I was surprised by the quality of the Rode Videomic Go II. I had already watched some tests of it, but all with it being used as a shotgun (on top of the camera, for video). And yes, in this function it is good for the price (much better than recording with the camera microphone, of course). But I found the quality surprising when used for voiceover or broadcast. A full-bodied sound, without sibilance. Thank you and a hug from Brazil!

[@semiprotech]

Thank you! I totally agree, the MV7 has some advantages with the physical controls and ability to use both outputs. I'm not a huge fan of the processing options in the MOTIV app though where I find all the processing except for the noise gate to improve the sound of the PodMic when used sparingly. The GO II definitely was a surprise to me! I figured I would throw it in there in case anyone was looking for an option that could be used off-screen and I was shocked by how nice it sounds up close. It was maybe a tad boomy at a distance of 4-5 inches but I think 6-8 inches away and it could definitely be used for voiceover segments in addition to general overhead booming.

[@faubourglincoln]

The command buttons are definitely not an advantage for the mv7.

[@simonhuegly]

Same here! And I instantly thought, why would I buy such a bulky PodMic, when the VideoMic Go II sounds sooo good, while being much more portable for outdoor use, too. Well, I understand it totally depends on the use case. The integrated DSP capabilities of the PodMic could be game changer for everyone who concentrates totally on Podcasting indoors. I am just starting to do some outdoor Video as a hobby photographer and wanted something also for indoor voice over. VideoMic Go II might be a good allrounder??

[@simonhuegly]

@@semiprotech could I get the VideoMic Go II sound as crystal as the PodMic USB easily via the Rode software? Or is this a definitive plus of the PodMic?

[@VaibhavAgain]

@@simonhuegly you can not get it sound the same but after applying some filters, you can make it sound good enough.

[@hellolau]

Wow, what a great review! This will become the comparison reference that people are going to look for regarding this mic. You are even faster than the already good Tom Buck 😊

[@semiprotech]

Wow, thank you so much! I enjoy Tom's channel a lot. Appreciate it!

[@gnorb]

Fantastic comparison. I love the structure and clarity of this. Thank you! I’m using this for work, and debating between this PodMic, the MV7, the ATR-2100x, and the Blue Yeti. (I also run a YT channel and I’m thinking double use, but a dedicated ATR-2100x is tempting, as is having the mic off screen. That internal DSP, though…) I’ll be doing my own testing to figure out my needs, but again, this was huge, so thank you!

[@mb-watches]

Thanks for this great comparison. The one thing i like on the MV7 is the gain control and the mute button. That side, the sound of the Podmic usb is great and for travel and studios work it is a very versatile mic. It’s going to be the Shure MV7 or the Podmic USB, will check them out both but this review at least narrowed my choice down quite a bit.

[@semiprotech]

Thanks! I'm glad it was helpful!

[@PaulsMedia2024]

Interestingly, I liked the dearest and the cheapest mics. Overall, however my favourite is the RØDE NT-USB+

[@nahkanukke]

Thanks for the video. I did get the USB version for gaming.

[@jim-huntercelestin8893]

The zoom zdm1 stood its ground. Such a great mic.

[@semiprotech]

Agree it's a great value for the price!

[@TransplantHelper]

Yes, I have both and the zoom sounds great. It’s only con is handling noise of you bump your desk. Great Mic

[@joseluisruiz3789]

I personally thought the Rode NT-USB+ sounded the best. To me it had more lower end and somewhat of a broadcast sound to it over the PodMic USB. So i think ill be getting the NT-USB+ mic for my PC setup. Thank you for the wonderful and very detailed video. Thumbs up.

[@semiprotech]

Glad it was helpful! And I agree that the NT-USB+ has a very nice sound!

[@TPMUniversity]

So prefer usb+ over both usb and XLR takes with pod mic?

[@vanceshepherd1618]

Honestly, the ZDM-1 is probably the best bang for the buck. Especially since these can be picked up open box for $30. Yep, they have handling noise, but a cheap shock mount tones that down.

[@rafapucpr]

Your reviews are as high quality as the Podcastage channel I watch, please continue doing more microphone reviews if possible. 👏👏

[@semiprotech]

Thank you so much!

[@StephenCarterStressExpert]

This is a nicely done, thorough review of the new Rode PodMic. The comparisons were useful, although I believe one of the comparison mics was a condenser. Nicely done, thanks for posting this resource.

[@semiprotech]

Thank you so much!

[@purposedcomposition]

Great video. I think the MV7 sounded a little better than the podmic USB. I'm in the market for the podmic USB just to stick with the rode ecosystem but maybe I'll save a few more coins to get the MV7. IDK

[@CreativeStudiosFM]

Excellent comparison. You can tell when processing is on the shore sm7b sounds the best. Understandable why it's highest price. The podmic sounds great on usb only or processed. Just a small step below the Shure. I'm really not sure why the others exist

[@nicksonyap]

Awesome video! The range of comparison really allows us to appreciate the differences of the PodMic over the others

[@semiprotech]

Thank you!

[@denttime]

Nobody is talking BOUT why it doesn't work going straight into an iPhone 15. Specifically if you use it to do voiceovers for capcut. Sound is too low even using with the app.

[@vrab.]

Has this been resolved? I’m debating between the podmic usb and the senheiser profile.

[@Astronaut_FX]

Another microphone you might like is the Tula microphone.

[@matthewcarmody2283]

For gaming and live-streaming would you recommend the Podmic USB over Shure mv7?

[@benjiang9789]

I think your voice sounds great through any mic. Voice matters. SM7B non-processed sounds most pleasing to my ears.

[@MrMoeJo]

I really appreciated diving into your video comparison of microphones. It's clear you've put a ton of work into it, and honestly, the sound quality from the PodMic USB blew me away. But there's a catch for me - the software that comes with these mics is for Windows only, and I'm a Mac user. I'm curious about the gain levels, like does powering the mic through USB affect its gain, or is XLR the way to go for enough juice? Here's where I'm coming from: I ended up with a Yeti X mic, not realizing it was a condenser instead of dynamic. I've heard from a few folks that dynamic mics are usually the go-to, especially when you're tweaking the sound with an EQ. They also said the Yeti X rocks in a soundproofed space and Vocal booth, which got me thinking since I record in my home office and am still trying to nail the perfect setup to cut down on echo reverb. What's your take on this? Should I think about selling my Yeti X for a dynamic mic? I'd really value your insight, especially since I'm still learning the ropes here.

[@hanyunseung]

I'm going to buy for the narration of the review video. SM7B is said to have a warm voice, but I think you can feel stuffy in the review video. I know it's a matter of personal judgment. However, I ask you because you are a KZbinr who is filming a review video. 1. I know we need to replace the pop filter for MV7. Since RODE PODMIC is a built-in pop filter, is it no problem to use it without a separate pop filter? 2. RODE PODMIC VS M7X What do you think is the right microphone for the narration of the review video?

[@Astronaut_FX]

Great job on this video! Very well done. Tip - it looks like you’re using On-Stage quick release connectors. They’re inexpensive and they work - until they don’t. The spring loaded mechanism is fully sealed meaning you can’t inspect it for wear. And they do wear, but you won’t have any notice, until it fails and your expensive microphone hits the floor. I guess technically at that point it is “On Stage.” Do yourself a favor and upgrade to some quick release connectors with a better design.

[@semiprotech]

Thank you! I am indeed using on-stage quick releases. Do you have a recommendation for a more sturdy option?

[@Astronaut_FX]

@@semiprotech I use and really like the Gator Frameworks quick release connectors. GFW-MIC-QRTOP

[@semiprotech]

@@Astronaut_FX Thanks! I'll check them out.

[@Bmovox]

I have both Mv7+ and Podmic and the Mv7+ sounds far more soothing. The Podmic sounds a bit hollow but tinny. I also think Podmic is better for bright vocals

[@Daxverse]

Hey, What do you think about xdm 100, is it any better than podmic usb and mv7 plus?

[@tonyantoine5823]

Great review! The shure seems to have a natural bottom that sits in a very comfortable space. The Podmic is very close, just a tad higher pitch. The winner is both. The average listener would not be able to tell the difference.

[@Kateydid18]

Which shure?

[@garlandquek]

Awesome production, and very helpful information and comparison, thanks so much. Any thoughts on the newly released Shure MV7+ vs the Rode? Seems like a more direct competitor.

[@RaddyDev]

I can't believe how good the VideoMic GO 2 sounds. I get a lot of reverb when I use mine, and I had to get a dynamic mic - MV7x

[@semiprotech]

The Go 2 sounds much better than I expected at close range as well. It also sounds notably different to me when connected over USB compared to using the 3.5mm output into a camera. It must be something different about the USB (5v) circuitry vs the 3.5mm (2.5v plug-in power) circuitry. The MV7x was a great choice though if you were trying to minimize room echo, that should definitely do the job for you!

[@jackcapella2707]

With regard to the XDM-100 it’s not just yours, I sent my first purchase back because of the monitoring white noise… Using a ground loop isolator I was able to significantly reduce it but who wants that thing hanging out of the mic. The second mic I received was still noisy but less than the first, I could reduce the noise with just the cable extender so decided to keep the mic because I love the sound I can get with the mic and it comes with everything you need. This is, however, a very disappointing at this price point and completely unexpected from Rode. Great review!

[@semiprotech]

Thanks for sharing! I agree it's very strange and disappointing coming from Rode that many of the XDM100 units would have excessive noise in the headphone output. Seems like something they definitely should have addressed prior to release for a product in that price range.

[@andrewwilliss6500]

PODMIC USB sound the best, so I bought one!

[@Gadoora]

Awesome review , woul you recommend it for recording hip-hop vocals?

[@romari2706]

All the comparison microphones including the SM7b sound muffled compared to the PodMic USB. Weird. It makes comparisons difficult.

[@californiadreams9408]

I think PodMic is little bit louder than MV7, but summary MV7 is more softly sound, but PodMic beats all mics before MV7

[@SAPIENSPARABELLUM]

Very helpful, thank you 🙏

[@merlin9244]

Well done, thank you very much. Cheers, Armin

[@kompoo2164]

Great videos as always ! Does the rode podmic usb has a mute button on the mic? Or we need to mute the mic via software?

[@luifenutricion]

I am one of those that is in between the Shure MV7 and the Podmic USB. I think de Podmic USB wins in price and ease of use. Both are great in sound but I love the Shure MV7 because of looks. I am looking for a dynamic microphone to use in Zoom calls and on Short Form videos. What do you think?

[@semiprotech]

That is a tough choice! One other thing to keep in mind is that the windscreen that comes on the MV7 is not great at stopping plosives, so a lot of people will replace it with a different one that might change the look a bit. I've heard if you buy a replacement windscreen for the SM7B it works better and still looks pretty good. I personally like the processing options on the PodMic USB better than the MV7, although the noise gate is a bit finicky. I'm not a huge fan of the capacitive volume control on the MV7 but you can control both the mic gain and the headphone volume with that control - the PodMic only allows you to control headphone volume with the dial on the back, the gain has to be adjusted in software over USB. They are both great options for meetings and video content though so you can't go wrong!

[@californiadreams9408]

Aliexpress sells pop filters similar to those of the SM7B for 3-5 euros that can be put on the MV7

[@The31st]

Really debating between the sennheiser and the podmic usb. I prefer USB right now just cos it's easier but I like the idea of being able to upgrade my set up to XLR without needing to invest in a whole new mic. The profile is cheaper though and sounds really good! My issue is just a terrible recording environment and I'm worried that a condenser is just going to pick all of it up. Any thoughts?

[@VaibhavAgain]

You can make it not pickup the background sounds by using some filters. Profile doesn't come with a software so you will need to use obs or some other platform to apply those filters. But the noise removal comes at the cost of quality. So prefer some dynamic mic instead of condenser ones.

[@schnozfart]

Im so stuck between the rode podmic usb sm7b and q9u. I care a lot about the handling sound which makes me lean more away from q9u, but the sm7b price is really steep especially having to get an interface for it. I ended up getting the podmic usb because of this but im not sure if I like how my voice sounds on it. Choosing between mics has been a headache.

[@DavidWaldrip]

Great video! Awesome of you to do such an extensive comparison. I currently have the Elgato Wave 3. When I listen to your comparison I don't noticed much of a difference. Might be slightly better with the Rode. I use my microphone setup on the road mainly. Any suggestions on sticking with Wave 3 or adding the new Rode mic? Thx!

[@semiprotech]

Thanks! It would depend on which of these factors you care most about and/or would use the most: - PodMic USB has convenience of retaining the DSP settings in the mic, no software is required to add processing. - PodMic USB is definitely more robust/durable, BUT also a lot heavier in a bag. - PodMic requires a separate stand - Wave 3 has the desk stand included. - The Wave 3 is going to probably be a little more forgiving on all voices - the PodMic tends to sound great on some voices and less so on others (it's a bit mid-forward so a nasally voice might have that amplified a little). - Wave 3 has better on-mic physical controls. The PodMic doesn't have any physical control over the monitor mix/blend or the mic gain. - PodMic USB should be a little bit better at isolating voice vs. background noise - in my testing my room was quiet and has some sound treatment, but in a space with appliance noise, outside noises, etc. the Wave 3 will likely pick those up a little bit more. - Wave 3 has a slightly better headphone output - it had the cleanest headphone output of all the mics I tested in the video. PodMic USB is definitely usable for recording & playback, but I could actually listen to casual audio through the Wave 3 without being bothered by any hiss noise. - And of course the PodMic has the XLR connection there if you ever need it. If you at some point get an XLR recorder or interface to travel with or need to plug into someone else's', there's no need for a different mic. If none of those things tip the scales in the direction of the PodMic for you, then keep rockin' the Wave 3 because it's a great mic!

[@DavidWaldrip]

@@semiprotech I appreciate all this information so very much! Thank you! You make really honest points. I like lots about the RodeMic but my El Gato is rockin right along. I like the way the pop filter attaches to my el gato. Make it look better. I personally think the rode filter makes it look less good but it’s the sound that matters. Thanks a million. Keep making great content!

[@vigamortezadventures7972]

Sennheiser low profile and atr2100x was great on your voice ..

[@OKRAinu]

Yeah you can't output XLR and USB at the same time is a big bummer for me! That's the only reason I'm looking for a XLR/USB microphone. My usuage is about plugging XLR to my PC interface for streaming and to use the USB output to my PS5 for voice chat. Anyway, it's a nice review man!

[@semiprotech]

Thanks! It's a shame they didn't do dual-output because I know that will be a dealbreaker for some!

[@yahtnichols]

@@semiprotech Do you think Rode can enable that feature with a firmware update?

[@dougmacmillan1712]

I liked the sound from the PodMic slightly more than the MV7.

[@TheTimeProphet]

I find the quality of the Podmic is good, but it picks up too much background sound for a dynamic mic

[@DarrellChat]

Please tell me how you get this professional gain level!! lol I’m on iPhone 15 pro using the rode central camera app. I literally have to turn it all off the way up

[@RonaldPostelmans]

Nice video, Are you able to connect the podmic usb to Rodecaster pro 2 with XLR? (you only mentioned USB) Qua sound, i really did not hear any difference from all the mics, looks all the same.

[@FERCONECTA]

Thanks for the comparison I was looking for something like this can I barrow one for review hheh ; p

[@universootn]

Me encantó tu video. Excellent video!

[@9APECXD]

I like MV7

[@dmoka]

Awesome comparison, thank you for that! A question: does the Shure MV7 works well on Windows OS?

[@semiprotech]

Thanks! In my experience, the MV7 is stable on windows. My work computer is a windows laptop and I've never had a problem with it connected to a USB-A port on the dock (HP dock). I have experienced a few bugs with it connected to my iPhone via the camera adapter - sometimes the MOTIV app doesn't recognize it and I have to unplug and plug it back in, but on desktop, both mac and windows seem to be consistent and stable with it (with or without the MOTIV app open).

[@dmoka]

@@semiprotech Thank you, appreciate your detailed feedback! Just a quick question if you don't mind, you use Windows 11, right?

[@aquapixel0]

Thank you for the video. I would like to know what headphones you are using?

[@semiprotech]

They are Audio Technica ATH-M50x in the gunmetal color

[@aquapixel0]

thank you@@semiprotech

[@josiahmsantiago]

You mentioned that the MV7 Can record directly on your phone with the Shure app. Could you record with the Podmic USB on your phone using Voice Memos since the DSP saves anyways?

[@keskinselcuk]

Kanalınızı yeni keşfettim. Gerçekten benim için faydalı bir video oldu. Vermiş olduğunuz harika bilgiler için teşekkür ederim. Başarılar dilerim.

[@enkeierick]

Would you recommend this over the Videomic go II for an iPhone recording rig (mic 3-4 feet away)?

[@JayzBeerz]

They all sound exactly the same to me.

[@chalo2876]

Tnks this is useful ❤

[@saintwolfvision]

With the software can it sounds similar to the SM7b or just deeper and richer?

[@Vampvyr]

I own the Rode NT USB currently and although It's held up fairly well I'm considering switching. It's such a sensitive microphone, it picks up EVERYTHING. I want a USB mic for ease and convenience (I don't have the budget or the space for an XLR mic) and something good for streaming/gaming/recording KZbin vids (preferably something that won't pickup my keyboard and mouse, my air conditioner, the hum of my pc tower, and the cars on the road outside my house) I was wondering if anyone had any recommendations?

[@getwetsoon]

are podcasters recording directly into their computer? not to an external recording device like the zooms 4 or 6 anymore?

[@Marcin_Kubicki]

Given the scenario that the price does not matter at all, which of the models in the title is better suited for podcasts? PodMic USB or NT1 5th gen?

[@semiprotech]

The PodMic USB will be more forgiving in recording spaces that don’t have sound treatment or have some background noise. The NT1 5th gen is a fine choice for quiet spaces with some sound treatment. The NT1 is going to sound a little more neutral/natural but will require more tinkering in post (noise reduction) if the recording space has fair amount of reflections or ambient noise.

[@exMasterNQQB]

Hello. Thanks for the review. Can you tell me if the microphone can simultaneously output sound via USB and XLR ?

[@semiprotech]

Hi! Unfortunately no, the USB and XLR outputs cannot be used at the same time on the PodMic USB.

[@pangaea426]

Shure MV7 & ATR2100X can do so

[@rickygriffin7906]

Great job 🎉

[@soldadogears]

wow, thank you, nice video

[@semiprotech]

Thank you!

[@magicstone2218]

If I use Podmic usb to record the music sound from the speaker, do you think it is suitable, or do you have other recommendations

[@TheToroman61]

Thanks

[@daniolomper]

Hello, Can i buy this popfilter separately?

[@patrickspiegel]

awesome video!!

[@semiprotech]

Thank you!

[@patrickspiegel]

one question. If i dont have an xlr controller like the scarlet solo, is it worth getting the scarlet or is the sound quality not too different between XLR and USB. Thanks

[@semiprotech]

In my opinion the sound quality of the podmic USB is definitely good enough over the USB connection that you don't need to use it with an interface if you don't have any other reason to get one.

[@iammcmags6557]

just bought podmic usb. should i go xlr connection for a beginner?

[@semiprotech]

If you don't already have an audio interface, nothing wrong with using the USB output!

[@TransplantHelper]

Everything sounded better than the Rode

[@uguronlineShorts]

podmic usb mi maona pd400x mi ?

[@xeroeddie]

Quick question. I'm new to all of this and was wondering. For USB mics like ATR2100x or Sennheiser Profile with no software features, can you run it through OBS and apply filters/effects that way?

[@semiprotech]

Yes! You can apply effects in OBS that will be "burned in" to your live output/recording. If you're recording, I personally recommend applying your processing afterwards because you'll have more control. But for live use, it definitely can be helpful to apply a little bit of processing via OBS if you want to add a little compression, corrective EQ, etc.

[@ArtemioSilva]

In an untreated room, which one is better at rejecting reverberation?

[@semiprotech]

Out of all the microphones in the video, the best at reducing reflections would be the SM7B in my experience. The best mic that I've ever used at reducing the sound of reflections would be the ElectroVoice RE20. But for a USB mic, the XDM-100 does a very good job and the PodMic USB is also quite good especially if you can keep the mic fairly close in the 6" range.

[@ScreaminpirateEDC]

For 2+ years I've used the Rode GO II micrphones for youtube. I have the MV7 right now and It's...ok. Would the Podmic USB be a solid solution for KZbin recording?

[@semiprotech]

The PodMic USB has a little bit of a brighter tone than the MV7 to my ears. If you're looking for a little more clarity, you might enjoy the PodMic USB. I also prefer the DSP options in the PodMic over the MV7 but that is also subjective and wouldn't make a difference if you don't use the built-in DSP. The only thing I would say about the PodMic's sound is that it's a tad mid-forward, so if your voice has any nasal qualities it could amplify that a bit. But otherwise I would say it's a solid choice. Is there a specific quality about the MV7 that you're not liking?

[@ScreaminpirateEDC]

@semiprotech The application on desktop for the MV7 was..ok at best. Didn't really assist in any noticeable way for me. I now have a Focusrite solo, but the gain is up at around 90%. Also I noticed I sound much brighter and my Plosives are very noticeable. I know part of that is gain, but it's up that high because I use the microphone for work calls as well.

[@sirgigolo]

There were several that sounded better to me. Great mic though

[@NoxFatum]

Btw have u isolated ur room? Is there any way to digitally get rid of the voice resonating from empty walls...

[@semiprotech]

I use two main sound absorbers in my recording space and the floor is carpeted (disclaimer - affiliate links): 1. AudiMute sheets over the windows. They cover pretty much any size window nicely - not soundproof but definitely dampen the sound from outside and absorbs reflections inside. amzn.to/3Xn7RtS 2. Sound blankets hanging on stands. I use two of the 80x80 inch 10lb blankets from vocalboothtogo and hang them on light stands with a cross-bar. These have made the biggest difference for me in reducing room reflections. semiprotech.link/vocalboothtogo I also hang a heavy pair of curtains over the door while recording - any curtains, just double them up and hang from command hooks. On the software side there are de-reverb plugins available for most DAWs. I've only heard good results from two things personally though - the new Waves Clarity Vx DeReverb plugin ($29) www.waves.com/plugins/clarity-vx-dereverb and the Hush app for Mac ($49) hushaudioapp.com/. The hush app is only available for Mac currently and works as a separate app rather than a plugin but it works really well in my experience at reducing both background noise and reverb. Hope that helps!

[@tundranocaps]

The Podmic USB, especially when you turned on processing, sounded considerably harsher. I think you might've overdone it with some of the DSP settings. The low boost definitely helped.

[@semiprotech]

I did have the DSP settings turned up pretty high (higher than I would use) just to make sure it was more obvious when it was on vs off.

[@tundranocaps]

@@semiprotech I'd suggest avoiding that, except maybe for a small segment of comparison, as people use these videos to pick a microphone, and if the DSP sounds overbearing, it'll affect their choices. Can do a small segment with them "over the top," but then for actual testing, go with what you think sounds best.

[@MCD1031]

What arm or table do you have the rodecaster ?

[@semiprotech]

I have it mounted with the VESA attachment on this laptop arm: www.amazon.com/gp/product/B083S7JY78/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

[@zrezier413]

does XDM100 is dsp retained ?

[@George-o6u9m]

If the Shure MV7 and the Rode PodMic USB were the same price, which would you buy and why? Thank you

[@semiprotech]

I would buy the PodMic USB unless I needed to use both USB & XLR outputs at the same time, for these reasons: 1. I like the sound of the available processing (minus the noise gate) better than the options available in the MOTIV app. 2. The included windscreen works - the MV7 windscreen really needs to be replaced if you want something effective at stopping plosives. 3. The MV7 is still micro-USB and that annoys me. 4. PodMic USB works with Rode Connect and UNIFY which gives you free access to custom routing of your inputs and system audio. The MOTIV app is nice (and the mobile app is admittedly better than anything Rode has for smartphones) but doesn't give you the same level of control for multiple sources. From a sound quality standpoint, they don't sound the same but both are very good so it's pretty much a tie for me there. I also have so far found no significant difference in their handling of background noise - both perform well. The PodMic USB might pick up bumps of the boom arm a bit more than the MV7, and the MV7 also has more controls on the mic through the capacitive-touch input. I just don't personally use those controls a lot so it's not a huge selling point for me. A lot of that is personal preference and definitely subjective - the MV7 is still a great option, but for me it's the PodMic USB!

[@George-o6u9m]

Okay thank you very much! I’m more so focused on the sound qualities of the microphones as I’m not too bothered about Micro USB, I’m willing to get the RK345 replacement pop filter and I don’t have an audio interface. I appreciate with regard to the quality you gave it a tie due to it being down to preference however, so I think I may go for the Shure MV7 as I can buy the mic 2nd hand for a lower price and hopefully find one in good condition. Thank you for the reply, and great video. Keep it up!

[@JaredWilliamScott]

Can I connect the MV7 to my Mac (for work recording) while having it also connected to a rode caster duo (which is connected to my gaming pc) at the same time?

[@semiprotech]

Yes! I've been able to record through XLR into my Rodecaster Duo and into my MacBook over USB at the same time. The signal is sent to both outputs simultaneously.

[@ObakuZenCenter]

The Rode PodMic USB sounds flat, with no real depth, no bass presence. I wouldn't buy it even if it were half the present price.

[@m-zurowski]

Podmic beats the crap out of MV7 :D

[@orson091]

as an owner of the NTUSB, it is a piece of shit. when they are in a sound controlled room im sure it might be JUST ok, in a household environment they are shit, and even in a sound controlled room i still wouldnt even be happy with it if i spent half the price.

[@paulgee7513]

What did you end up getting instead?

[@hakansalihoglu]

I purchased the Rode wireless go 2 microphones and their sound quality was terrible. Then, when I went and installed lavaliver go microphones on it, the sound improved a little, but it was not professional at all. Then I put these microphones aside and bought the Rode nt USB + model and observed that the sound it gave was at very satisfactory levels. I'm thinking of buying a rode videomic ntg and a rode wireless pro to use in my outdoor video shooting. I want to move to a more professional level in my studio shooting. I'm thinking of buying microphones that I can use with my computer, mobile phone and camera. I am thinking of buying a boom microphone for the camera and a dynamic one and a rode nt1 5th generation for the computer. Or I can also connect the rode nt usb + model. I haven't made a clear decision yet. What are your suggestions for me in this regard ? Since I am Turkish, I wrote it by translating it from Turkish. Türk olduğum için türkçe dilinden çeviri yaparak yazdım. Rode wireless go 2 mikrofonları satın aldım ve ses kaliteleri çok kötüydü. Sonra gidip üzerine lavaliver go mikrofonları takınca ses bir nebze düzelmişti ama asla profesyonel değildi. Sonra bu mikrofonları kenara kaldırıp rode nt usb + modelini aldım ve verdiği ses gayet tatminkar seviyelerde olduğunu gözlemledim. Ben dış çekim video çekimlerimde kullanmak üzere rode videomic ntg almayı ve rode wireless pro almayı düşünüyorum. Stüdyo çekimlerimde ise daha profesyonel seviyeye geçmek istiyorum. Bilgisayar cep telefonu ve kamera ile kullanabileceğim mikrofonlar almayı düşünüyorum. Kamera için boom mikrofon bilgisayar için ise 1 tane dinamik 1 tane de rode nt1 5th generation alma düşüncelerim var. Yada rode nt usb + modelini de bağlayabilirim. Henüz net karar vermedim. Sizin bana bu doğrultuda önerileriniz nelerdir ?

[@Stewie741]

7:07 8:23