RODE VideoMic GO II

[@curtisjudd]

One thing I didn't get to cover in detail but is really nice for podcasters: In the RODE Connect app in combination with the VideoMic GO II, you can use the same processing you can use on the RODECaster Pro. That includes the noise gate, compressor, big bottom, and aural exciter. Pretty impressive for a $99 microphone.

[@paulbutterworthbillericay]

Excellent review, I purchased the NTG and was an excellent mic apart from a static type noise which was such a shame, I even uploaded the latest software but the noise was still auditable, I use a Samsung android phone with a trrs 3.5 cable so I take it I will have to purchase an additional cable?, At present, I use a micro shotgun mic, which does a great job, but I want more reach really for interviews and capturing events. Thanks

[@curtisjudd]

@@paulbutterworthbillericay Yes, often cables are the weak point and either pick up interference or have problems with or near their connectors. So yes, I'd try a different cable.

[@RT365]

Where can i fing the mini tripod you are using on the LUIMIX? THX

[@pergunnareriksson]

It looks a lot like the Rode Tripod 2 Camera and Accessory Mount

[@curtisjudd]

I used two in this video. One was the RODE tripod which is linked in the description (click on the VideoMic GO II link). The other is a much beefier tripod from iFootage called the Cobra 2, also linked in the description.

[@GaryStockton]

Sounds like a great microphone to add to my kit, the price and features are impressive. I recently purchased the NTG5 to use as an overhead boom, and very impressed with it. I have actually started recording videos without lavalier microphones and getting much better audio.

[@ahriik]

The NTG-5 is absolutely excellent. Sounds great, and extremely lightweight. Not quite as a good at rejecting ambient noises as say a 416, but in about 85% of situations where I'm using a shotgun, I go for the NTG-5 instead of the other mics I have simply due to how light it is.

[@curtisjudd]

Yes! That NTG5 is such a good value to price microphone. It sounds great.

[@mrheng562]

Wifey at the end had me dying!!! Keep up the good work, Curtis. The only con that I really didn’t like was that the settings on the Rode Central app isn’t saved. The mic is hot on my Panasonic S5. It’s not the mic’s fault, but it could be a nice firmware update.

[@curtisjudd]

Thanks, Mr. Heng!

[@skakdosmer]

I just received the Røde WS-12 furry windscreen for this microphone, and with it was a little rubber-ring to cover the output you’re not using: If you use the USB, it can cover the mini-jack socket, if you use the mini-jack, it can cover the USB port. And this might be quite important. Robert Rozak (I hope I spell his name correctly) from Juiced Link had a very interesting video on his now closed KZbin channel where he blew on a microphone through a straw and showed how any crack on the surface of the mic was a potential source of wind noise. His trick was to cover every crack and crevice with tape.

[@curtisjudd]

Thanks for sharing, Lau.

[@ryszardm9477]

I do not know enough English to write efficiently and I have to use a google translator. Unfortunately. :(. I watch these acoustics lectures with interest. I am grateful to admit that I have supplemented my knowledge of acoustics, sound processing and recording techniques a lot. You can say that I absorb this knowledge like a sponge with water. For 40 years I have been dealing with electronics related to sound, and for 10 years still image, recording and editing films. I must admit that I was pleased because there is a channel in which I can (at no additional cost) draw from the sources of well-prepared knowledge in your performance. You can hear that in the background someone (a woman ) watches over the funds, I know it :) I hope the translation is understandable. Thank you Curtis.

[@curtisjudd]

Thank you Ryszard. I know it is not easy to have to use Google Translate so I am very happy that you made the effort. Best wishes and happy recording!

[@ovi.1000]

Hi Curtis, I return again, asking your advice. I need a budget microphone, cardioid or supercardioid, for dialog / v-log, that I can use indoor in acoustically untreated room. A lavaliere mic would pick too much noise coming from outdoor/windows as this room sited in busy city-centre. Another limitation is, I need to be 3.5 mm jack (no phantom power). After searching through many videos you have, I think I may find some options. You have two videos, one is about "RODE VideoMic GO II" and another one is about "DEITY V-Mic D4". Now, I have few questions: 1. Do you think such kind of microphones will work well for above described situation? 2. (I prefer Rode for my subjective reasons) - How did you find the output of Rode? Does it have enough gain in term not to raise too much the gain on a camera as Sony A7III? - Supposing I use the app, can I change the gain for the Rode microphone (to preset it) or this is exclusively for USB use? 3. Do you have any other better recommended microphone under €300 or around it? Many thanks!

[@capturethisfilms]

Always love your reviews Curtis! One thing I've been trying to find out is when using the custom settings through the RODE app, it appears to only be applicable to the USB-C connection into your mobile device or computer. It does not appear to carry the settings over when you use it with your 3.5mm jack to your camera. The ability to adjust these settings to be used on your mirrorless camera would make it more powerful and it would be disappointing to know if it did not have that ability. Given that the Wireless Go ii can carry these settings over and and onto a 3.5mm output, I don't see a reason why it would be an issue as well other than a firmware update. Perhaps using a USB-C from Videomic Go ii to 3.5mm into camera would work?

[@curtisjudd]

I'd contact RODE support to confirm and provide feedback. They need to hear from you!

[@dankelly]

Seems like the HUGE difference between this and the NTG is the gain control when connected directly to a camera. NTG had it; Go II doesn't at all. I was hoping you could use the app to set the gain and it'd be saved to the mic itself.

[@curtisjudd]

That gain control is really helpful on the NTG.

[@dankelly]

@@curtisjudd I went with the Deity D3 Pro because it's $110 cheaper than the NTG and only $30 more than the Go II , but I do like what the NTG offers... Just don't need it at this stage.

[@ScottJWaldron]

Any idea if this would work with the Atomos Ninja V by powering it through a USB power adapter while using the 3.5mm jack for the actual audio output? (after watching the video I'd say yes with maybe line level output?) The Ninja V doesn't supply power through the 3.5mm input so I've been looking for solutions I can leave plugged in. Right now I use a Takstar SGC-598 microphone with an AA to USB power adapter so I don't have to replace/charge a battery.

[@LiraeNoir]

That's a really good question, I'm curious as to the answer too now.

[@curtisjudd]

RODE responded that it would work to another question below, but I'd check with their support to confirm for the exact setup you're using.

[@ScottJWaldron]

@@curtisjudd I see, thanks for the info!

[@brettsherman7810]

Nice review. I was on the fence about adding this to my camera kit because I already have the VideoMic NTG. But the fact that I can plug it into my Wireless Go II transmitters and I can use it in a pinch when I, um, don't charge my VideoMic NTG has sold me on it. Rode keeps knocking it out of the park. At this price point it's worth just having it in the bag.

[@curtisjudd]

Handy tool, for sure.

[@skakdosmer]

Sadly this mic doesn't come with a case. But I've found that the inexpensive Røde ZP2 works well enough. It'll fit the mic with the furry WS-12 windscreen (and the rubber ring) on it, mounted on the shock mount, plus the foam windscreen and a couple of cables, and with a bit of thought and care you can even place it so that the fur doesn't get caught in the zipper.

[@curtisjudd]

Thanks for the tip.

[@AllThingsFilm1]

I recently picked up this nice little mic. One thing I like about it, is that because you can slide the mount back and forth on the hot shoe mount, I was able to clip a Wireless GO transmitter on the area where the mount slides. Thereby, creating a boom mic that transmitted audio wirelessly. Of course, it works perfectly with the Wireless GO being a Rode product. Personally, I am very impressed with this mic and very glad I picked it up.

[@curtisjudd]

Thanks for sharing your experience!

[@1ytcommenter]

I like these RODEs. Good value for the money. Have you tried those small RODE VideoMic Me that attach to the mobile phone?

[@curtisjudd]

Yes: kzbin.info/www/bejne/i3nJoaiOgMyLbLc

[@Tmaxar]

I got the best out of this mic when I connected it to my Zoom H1n….got the best sound that way.

[@curtisjudd]

👍

[@Dracomies]

This USB microphone is amazing at that $99 pricepoint. I'm convinced it's the best sounding USB microphone out there in the market. Doesn't sound like most typical USB microphones.

[@ezrarichardson279]

Yeah, at the price point but the vidéo ici NTG sounds even better (but it costs a lot more lol)!

[@curtisjudd]

👍 🎙

[@Mani-aX]

Can that mic pick up the lens focus motor vibration? like a built in mic to an DSLR does? looking for something that wont pick up lens movement.

[@curtisjudd]

The shock mount will isolate most lens movement/vibration, but if the lens also makes noise, any mic will pick up some of that.

[@Abror.Akromov]

Rode videomic Go 2 and Sennheiser mke 400. Which of these two microphones is better to use for ASMR videos? Some bloggers claim that the Sennheiser mke 400 microphone has relatively strong 'self noise', is that true?

[@curtisjudd]

That was my experience, yes

[@tomaszlawrence]

Hey, Ive been looking for a mic to boom under $200 but have been struggling to find whats best for an indoor untreated room. Just wondering if you had any suggestions? Would the audio technica 875r be good? Great Video!

[@curtisjudd]

Yes, I’d opt for the AT 875r: kzbin.info/www/bejne/bn_On4GIrpeojrMfeature=shared

[@joelgrebinsilvestri]

i cant put the mic into a monopad i dont know how

[@ZoharGoldMine]

Hey, loved the video! What do you think about this microphone for filmmakers? (dialogue for short films, documentarys, etc)

[@curtisjudd]

Hmm, I’d look at the DEITY D4 kzbin.info/www/bejne/fIHaaGqnrK6afcU

[@IsaacFromHK]

Hi Curtis, can I use this VIdeoMic Go II shortgun mic with a boom placing in between 2 people (they sit very close to each other as a talking head video, just 2 persons), Do you think it would work? Otherwise I could also use the rode Wireless go II (with 2 lav mic, but since we are sitting very close to each other I was thinking maybe the VideoMic GO II shotgun mic would be a better choice)? Thanks.

[@curtisjudd]

You could, yes. Just need to tune the mic position.

[@adimology]

Hi Curtis, great video as always! quick question, VideoMic go 2 vs NT5 to the same field recorded : will the self noise level be the same?

[@curtisjudd]

Hmm, I haven't compared the two, but pretty close from memory.

[@chengolivier]

I heard this microphone is mono or dual mono through its jack output but stereo on its USB-C output, is this information correct? Also, I am using a MixPre-3 II and I cannot tell from the MixPre whether it's stereo or mono microphone, do you know how I can tell?

[@curtisjudd]

This is a mono microphone - it has only one microphone capsule. However, it may output the same audio on its left and right channels. You can tell on the MixPre buy setting inputs 2 and 3 to take the audio from the 3.5mm left and right channels respectively. (go into the channel menus and set the Input setting on channels 2 and 3 to Aux in 1 and Aux in 2).

[@JamesMusicCo]

Great review Curtis! How does this compare to the Samson C02s-especially given the $100 price point? I’ve been using the C02s for the past couple of years for instructional videos but I’m starting to look into recording directly into camera instead of syncing in post. I love the fact I got a pair with the C02s but I rarely use both unless I’m recording a guitar or drum set.

[@curtisjudd]

I prefer the sound of the RODE over the CO2s, but microphone position is super important for either.

[@SportFlow]

how would it compare to a Sony ECM-VG1 ? Thanks

[@curtisjudd]

Haven’t tried the Sony, unfortunately.

[@zogun]

Hi Curtis, awesome review as always. Please help me choose a microphone for indoor dialogue in an untreated room. Most probably I will use OBS to record. Rode Video Mic Go II vs budget pencil SDC like Se Electronics Se7 (Maybe Behringer or Samson or Rode M3) I'm using Zoom H5 & Audio Technica M40x, thanks 🙏

[@curtisjudd]

Of those, I’d probably choose the SE7.

[@zogun]

@@curtisjudd awesome, thanks a lot Curtis!

[@TheDanLovallo]

Great video. Would this work with iPhone 14 Pro Max? And where did you get lightening to usb adapter? Thank you.

[@ini-Vazquez]

I have the crazy idea of buy two and use them in field recording with an XY technique, is that a good idea for this mics?

[@curtisjudd]

Usually when recording stereo you want a wider polar pattern, but it should work ok.

[@Funitalianlessons]

Great review. Thank you. I use the NTG and don't like having to fuss with the gain control. Do you have any idea what gain setting on the NTG would be the same as the inbuilt output level of the VideoMic GO 2?

[@curtisjudd]

Good question, I don't know. Perhaps RODE support could answer that?

[@WayneRECs]

I have both the NTG and VideoMic GO II. I found that the output of the VideoMic GO II is about the same as if the NTG was set to 8.

[@Funitalianlessons]

@@WayneRECs thank you. That's very useful. I imagine the vide micro is even lower.

[@captainfuture9055]

I don’t like the the bulky headset which we have in the office. Is it possible to use the RODE Mic Video Go II in a noice office environment or will it pickup the sound keyboard, the phone conversation of my colleagues? Is it possible to configure a sort of notice cancellation?

[@curtisjudd]

It will pick up the noise, but zoom and others have pretty good noise reduction in 2024 just keep the mic as close as possible to your mouth, ideally within 10cm.

[@captainfuture9055]

@@curtisjudd Which mic would suite better in a office situation? Is a headmic the is wear around the neck the better option?

[@curtisjudd]

@@captainfuture9055 Sennheiser made a pretty good, not so bulky headset a while back which I liked, but that was about 6 years ago and I can't find the model number. I just use a RODE NT1 within about 4 inches of my mouth for my daily zoom calls.

[@TrueEssencePhotography]

I've been waiting on this!

[@curtisjudd]

Thanks for watching!

[@BeauHannamGuitars]

Thansk- how does it compare to the Deity D3 pro??

[@curtisjudd]

It should be compared to the D3 rather than the D3 Pro. But the main differences are that the GO II is a bit less directional and it has all of the USB features we covered here. So overall, it seems a fair bit more versatile. If you wanted to hear the difference, you can cue up my DEITY D3 Pro review in another browser tab and switch back and forth between the two to hear the difference: kzbin.info/www/bejne/jWq2lZhpmt5locU

[@betterworld7985]

Loved your video! I was wanting to know would you buy this or the comica vm30. I know their not the same price, but still curious which you find is the better sounding thanks :)

[@curtisjudd]

Haven’t used the Comica but have had issues with other Comica products.

[@betterworld7985]

@@curtisjudd thanks for taking your time to answer :)

[@sting9650]

Thank you for the video. Am I able to use this directly with the BMPCC4k? Thank you.

[@curtisjudd]

Should work, yes.

[@sting9650]

@@curtisjudd Thank you for your reply. What I negated to mention, and I’m not sure if you already know, the BMPCC4k (I think) has bias power (2 - 5v) so I’m not sure if this would be enough for the mic to output a high enough gain, as I know the BMPCC4k preamps require quite a lot of signal? Thanks again.

[@alifaisal]

Hello Curtis. I’d like to put this on a boom stand and get the mic close to the mouth but I record videos on my iPhone and have the SC15 usbc to lightening cable which is very short. Is there an extension cable or any way I can extend the reach of the mic?

[@LiraeNoir]

I never used Lightning, but I'm sure there longer cable that exist? Obviously not very long, those type of digital cables usually max out around 2 or 3 meters, but that should be quite enough for your application (or one can switch to a Active cable, but that's a whole different thing and the price explode up). And as always when pushing cable length, get a reputable brand, no need for digital to buy luxury or really expensive cable, but not the cheapest around either. Also, maybe there's a free solution too: don't you have some kind of hub or switch for either lightning or usb? You could put that in between your current cable, and a regular decent USB-C cable? So phone on the desk, short lightning cable into a USB switch (probably better if it's a powered one, that plug into wall power), then any decent USB-C cable from the switch to the mic along the boom arm? In theory that should work and you probable already have that hardware around?

[@curtisjudd]

The RODE VC1 should help. You might also need a TRS to TRRS adapter to get it to work with your phone.

[@alifaisal]

@@LiraeNoir hi Lirae many thanks for your detailed response. I think your suggestion is far too technical for me!!

[@LeaguePassFootball]

Is it possible to use this mic, as well as the wireless go ii receiver + 2 transmitters at the same time, all plugged into the camera?

[@curtisjudd]

Let me make sure I understand what you're asking: You want the VideoMic GO II plugged into one of the Wireless GO II transmitters and then the Wireless GO II receiver plugged into a camera? Yes, that should work fine.

[@LeaguePassFootball]

@@curtisjudd I want the two wireless go ii transmitters on one channel, and then the videomic go on another channel. The videomic go will stay on the camera, and the wireless go ii's will be placed away from the camera. I'll be using the splitter cable to plugin wireless go receiver and the videomic go into the camera. Since I can't have three channel audio in camera, I don't mind if the two transmitters are on one channel, and the videomic go on another channel. Hope that makes sense. Would this work?

[@aksoofficial]

Thanks a lot for the detailed video! I have a very specific use case that I hope you can assist with. I'm a DJ and I'm looking for a mic with which I could record some ambient/crowd noise that I can add to my mix recordings. Normally, I would turn up to a gig and there's a person on the decks before me. So, I am looking for something that is very easy to setup (in that circumstance) and also portable to transport. Turning up early to do a proper mic up is usually not really an option. The price point of this mic is very attractive, but one thing that makes me a bit nervous is the super-cardioid pick up pattern, which to my knowledge also picks up a bit of signal from the back of the mic. What are your thoughts on this? Any ideas that you could share would be highly appreciated!

[@curtisjudd]

Yes, it will pick up a bit from the back.

[@braydenfrost]

With the audio tests, were those with a treated room or untreated rooms?

[@curtisjudd]

Treated room.

[@cyklzycia8814]

Great work ty U

[@curtisjudd]

Thanks.

[@sosgds]

Great video! Is there an cable extension that you can like or can recommend to use this mic on a boom arm or a boom stand?

[@curtisjudd]

Yes, the RODE VC1.

[@sosgds]

@@curtisjudd thank you!

[@dylanj8676]

Not about this mic, but could you compare the VideoMic NTG to the Oktava MK-012 and maybe AT4053b for interiors? Maybe do an RF test or something with the VXLR+. I think a lot of people will consider the NTG cause it's within the same ballpark as the MK-012 film set's price. I'm thinking about getting a VideoMic NTG with the VXLR+ for scratch audio or something to carry for really quick recordings, I don't have transmitters to test it, I normally just stick the mics by laptops, phones, or other wireless devices to test it.

[@curtisjudd]

I don’t have the Oktava anymore, unfortunately.

[@silverlightphotoco]

Thank you for the time you spent on this review! One thing I have a question about, since I really like using certain mini shotguns with a wireless kit, is if both the Rode Wireless Go v1 and v2 provide plug-in power to power for mics like this (and perhaps the older VideoMicro) or if using a power bank to power it would work, if they don't??

[@CharlesVincentJr]

Had same Q…

[@silverlightphotoco]

@@CharlesVincentJr Curtis is super helpful with answering comments, and I know he'll get back to us, but I don't want him to rush because I know he's pretty busy.

[@curtisjudd]

I haven't tested it first hand, but yes, the Wireless GO I and II both supply power via their 3.5mm jacks. I don't know whether they supply enough but will check next time I get a chance.

[@silverlightphotoco]

@@curtisjudd I'm thankful for the helpful videos, so whatever you have the time for is great!

[@bite-my-shinny-metal-ass]

Only thing that would have been even more useful in the review would be an audio comparison between the two mics. Great content, as always

[@mrheng562]

I did that in my video and the NTG does sound richer. :)

[@bite-my-shinny-metal-ass]

@@mrheng562 thanks, that was useful.

[@mrheng562]

@@bite-my-shinny-metal-ass , I took it out and vlogged with the two mic side by side. I’ll make another video with both mics out in the real world and switch between the two. Just from reading the meters, the VideoMic Go ii comes in hot my Panasonic S5. It probably just my camera. I’ll test it on my GoPro too since my channel’s more about actioncams.

[@curtisjudd]

You can always pull up my VideoMic NTG in another tab and play back and forth between the two: kzbin.info/www/bejne/mWWzpmpof5p1iKc

[@skakdosmer]

Yeah, how many microphones do you have, Curtis? 100? 200? 500? Just curious. (I have a mere 55 - including this one)

[@curtisjudd]

Not sure. Probably around 100.

[@WesCrockettCA]

I'm considering this mic for Discord and conference call (webex, zoom, teams, etc) use with it mounted above my monitor. Currently, i'm using my webcam (logitech) mic for meetings. I assume this would be a massive upgrade for that. Do you think it would also be an acceptable alternative to an Antlion Mod Mic (which I use for Discord now)? Also, for PC use, does it need the Rode USB Cable or would a normal USB-A to USB-C cable work fine?

[@curtisjudd]

I haven't used those microphones but yes, I would expect this mic to sound better. Not sure about a "massive upgrade". The closer you can get to the mic, the better the sound will be (up to 3 inches or so). I don't know whether it needs the RODE cable but that is what I used for this review.

[@CraigHollabaugh]

Bought it with your sweetwater afflink. Thanks Chris, you're my goto AV guy.

[@curtisjudd]

I hope it works well for you, Craig. Happy recording! 🎙

[@timgalletas3856]

Hi Curtis. I bought this mic for my Sony ZV-E10 but compared to my other non powered mics, the audio being captured with the GO II is extremely low. Even after setting the camera gain all the way up, I’m not able to bump the gain on this mic. For comparison, the Rode micro does not have this issue. Rode said it’s probably the pre-amps on my camera, but I’ve seen other videos with the same mic and camera and they don’t have that problem. Do you have an idea why this could be happening? However, I don’t have an issue if I connect it via usb to the iPhone. Thanks.

[@curtisjudd]

Possibly an issue with the 3.5mm cable?

[@ridermobilenotary5377]

Great video, thank you! Its a gift for my son. What table stand would you recommend for this microphone?

[@curtisjudd]

Thanks. 🙏 I’d start with the included stand.

[@ridermobilenotary5377]

@@curtisjudd I didn't know one came with it. I just ordered this today because of your video. But you mentioned one over head, a arm moveable one, I thought 🤔

[@curtisjudd]

@@ridermobilenotary5377 Oh, that's a floor boom stand. Something like this can work for that case: kzbin.info/www/bejne/ioaonoR4j7CieNU

[@sporkaccione]

How well would this work for desktop streaming? Will it pick up all the keyboard strokes and mouse clicks if I were to put it behind the keyboard in front of the monitor even if it's pointed upwards towards my mouth? Thanks in advance! Amazing youtuber

[@curtisjudd]

Yes, it'll pick up all that vibration. If you put some foam under the stand that will help to isolate a bit of the keyboard and mouse vibration noise which transfers to the mic as rumble in addition to the higher frequency clicks.

[@armandlombard]

Hi Curtis. Thank so much for this. I have recently bought this microphone to pair with my canon R6, as my first shotgun mic. Not knowing any better and unfortunately up to this stage I have really not enjoyed the experience at all. The noise level or hiss from the Canon R6 pre-amps are terrible. I have treid different cables, and mics , all the same. This convinced me, its the cameras Pre-amps. I have already lowered the input volume on the camera itself, but the noise is still very prevalent. Is there any adjustments to make via the Rode Central app, to amplify the mics gain, to try and get rid of this terrible noise. Any advise will be greatly appreciated. Thank you

[@curtisjudd]

I think you'll want to look to a mix like the VideoMic NTG or DEITY D3 Pro instead of this mic.

[@edjefferson9175]

Handy little mic. Camera mic inputs seem to be improving. When are we going to be able to use the USB-c port on the camera for audio input? A side note - The “gain” control on the NTG is NOT an input level control. It controls output level. Not preamp gain.

[@curtisjudd]

Thanks for the clarification Ed. No idea when we'll be able to use camera USB ports for audio input. In some cases, that will displace other features like external recording.

[@maciejlechpaczkowski8717]

GJ Rode !!! Thx ... Next micro pleas make for ASMR... I wait...☺️

[@curtisjudd]

Mmm, yes, good idea.

[@gelatofi6823]

Thanks for the review, Curtis! Just wondering if you think it would be possible to get a broadcast sound from this microphone with EQ adjustments in post?

[@curtisjudd]

Yes, in most cases.

[@DLPictures]

Hi, thanks for a great channel and review. I picked up one of these mics for their great versatility, and was very impressed with it overall. I have one big complaint that I do not find discussed in any reviews online, and that is the ability to cope with wind noise. I do a lot of filming in rural areas in Africa which gets quite windy, so I purchased the WS-12 windscreen. But even with it on, the mic clips when used in high wind, which causes small little dropouts on recorded audio. I considered returning the mic, but love the versatility, affordability and sound quality. My work around was to use medical 3m Transpore tape to cover the openings on the front and sides of the capsule, the tape being slightly porous, lets enough sound in for decent quality. Have you come across this issue, is there a more professional work around or a firmware update that could solve this problem?

[@curtisjudd]

In high wind, the best solution is usually a blimp style cover which is much larger.

[@afoeder]

Thank you for this video! What is the tripod we're seeing at e.g. 1:40? You've only listed the iFootage Cobra II in your description… thanks again!

[@curtisjudd]

That's the RODE Tripod 2 and I added a link to the description. Thanks for catching that!

[@michaelpoczynek]

Looks like a great deal for $99 USD. Have a nice day, Curtis. Well done as always.

[@curtisjudd]

Thanks, you too, Michael.

[@martindemanable]

My camera (bmpcc original) has terrible preamps. Does this mic send a loud signal compared to other non powered mics? And will the signal be amplified when powered trough usb?

[@curtisjudd]

USB doesn't make the output signal stronger than plugging in via 3.5mm if that is what you mean? I don't have other non-self-powered mics as a comparison but it worked fine with my Panasonic GH5.

Hi Curtis. Thanks for your always very helpful videos. Is there a chance to connect the Go II to a zoom F6? I do have the Rode VXLR + Adapter, but i think the Zoom can only provide 24 or 48 Watt Phantom-Power, but not the needed 3-5 Watt Plug in Power. Is there any solution to make this working or should i go with the NTG4+ instead? Thanks for your help!

[@curtisjudd]

Yes, but I’d probably look at XLR microphones to use with the F6. The NTG4 is not the greatest sounding microphone. I’d prefer the NTG5 or perhaps the DEITY S-Mic 2.

[@armando.visuals]

What small tripod was that? 01:43

[@curtisjudd]

That's the RODE tripod. Separate accessory as I recall.

[@taspts]

Practical noise floor sample, can that by done with DaVince fairligth? I got a new Videomic NTG and want to compare with my other mics.

[@curtisjudd]

Sure, there are analysis tools in Fairlight.

[@AJCoReTV]

tough call, but I chose the VM NTG since I'll be booming it more than using the other features.

[@curtisjudd]

Fine choice.

[@malan2099]

Its like boya mm1 plus

[@curtisjudd]

Sort of, yes.

[@marcyoung8549]

Hey Curtis this is Marcus thank you for all your help your videos and all the knowledge . Will you get a chance to do a video or und boxing or a how it works video of the zoom F3 and your thoughts of this product thanks again.

[@curtisjudd]

Yes, I have a Zoom F3 on pre-order and plan to make a video about it. I don't really do unboxing videos, but prefer to do more in-depth videos.

[@vaidehiarts]

That looks (and sounds) pretty good! We were waiting for your review. Tascam X8 next pretty please?

[@curtisjudd]

Thanks. Yes, just waiting for the X8 to arrive. No shipping info yet...

[@teaandtoast]

I think this video is now out of date. Rode don’t support the Go2 on the connect app.

[@curtisjudd]

Interesting. Are you certain?

[@teaandtoast]

@@curtisjudd Ive just bought a Go2. It just doesn’t work for me. This link mentions it works but doesn’t have an image of the Go2. I’d I’m sure, but it could just be an issue for me.

[@SunkaWicasa]

Does it comes with the usb cable?

[@curtisjudd]

No, just the 3.5mm TRS cable to connect it to a camera.

[@SunkaWicasa]

@@curtisjudd thanks for the reply im guessing this will work with any usb type c to usb type c cable ?

[@curtisjudd]

@@SunkaWicasa Yes, I tried several and they all worked for me.

[@SunkaWicasa]

@@curtisjudd amazing thank you for the reply 👍

[@insanejughead]

Hahahahaha!! The voice of reason at the end, yo... Love it! (I hope you aren't known as Crazy Curtis by your family, haha.)

[@curtisjudd]

I am known as Mr. Microphone by my family. I have come to terms with that. 🙃

[@brunosancci]

Thank you very much Curtis! I was just comparing microphones to decide my equipment to teach. I'll stick with the NTG in this case. Greetings from Patagonia!

[@curtisjudd]

Thanks Bruno and happy recording!

[@champagj]

Great review, looks like a great budget buy. Would I be able to use this microphone with the Zoom Podtrack P4 using a 3.5 to xlr adaptor?

[@curtisjudd]

If you use an adapter which also converts phantom power to plugin power like the RODE VXLR+ or VXLR Pro.

[@craig4297]

Hi Curtis, have you tested this Rode mic with the new Tascam Portacapture X8 recorder?

[@curtisjudd]

No, I'm still waiting for the X8 to arrive.

[@camerajames]

Is there something proprietary in the RODE Lightning to USB-C cables? I’ve tried my official Apple cable and it can’t be found by my iOS device…. I assume that means the RODE brand cable is necessary for mobile recording? Any idea?

[@curtisjudd]

I don’t believe so, but not sure.

[@camerajames]

@@curtisjudd turns out it appears you DO need their specific RODE Lightning to USB-C in order for the app to see the mic.

[@LearnLightAndSoundSessions]

@@camerajames That's an odd choice. Thanks for confirming. I assume this is what RODE support confirmed?

[@camerajames]

@@LearnLightAndSoundSessions I haven’t heard back from them yet, but after testing and reaching out to others, that is what seems to be true

[@adobemastr]

Thanks, Curtis...I would say that with just a bit of post EQ processing, the sound out of this inexpensive mic would be great.

[@curtisjudd]

Agreed.

[@luisalcarazleal]

“Yeah, how many microphones do you have?” ... hahahaha G.A.S. is real.

[@curtisjudd]

😉

[@MagDag_]

Thank you, Curtis! Could you test the DJI mic and compare it with Rode wireless go II?

[@curtisjudd]

I cannot afford to but the DJI kit presently.

[@FrankSilverado]

The ending was hilarious hahaaa

[@curtisjudd]

🤪

[@yashiel]

As always, great content, waiting for this review. And the last part, I actually thought about that. hehehe

[@curtisjudd]

Thanks Yashi.

[@luis.craik]

Thank you, Curtis! Will it be crazy to record directly to a 32-bit float device like the F2/Track-E using this mic on top of a camera for vlogging?

[@curtisjudd]

Crazy enough that it is worth trying!

[@skymakai]

Yes, the Rode software is compatible with the Videomic NTG. Just tried it. 🙂 I’d been curious to hear a sound comparison between the two.

[@curtisjudd]

You can cue up this review in one tab and my VideoMic NTG review in another tab and go back and forth to hear a comparison: kzbin.info/www/bejne/mWWzpmpof5p1iKc

[@NeonsStyleHD]

Thank you Curtis. Ask and ye shall receive :)

[@curtisjudd]

👍

[@gdrriley420]

Given the D3 and D3 pro price drop how you do think this compares?

[@curtisjudd]

I haven't tried the D3 so not sure on that one. I prefer the sound of the D3 Pro a bit more than the GO II, but the GO II is really made for a different market - people who want simplicity over almost everything else.

[@petrub27]

Forget abou this one. Where's the tascam x8 review?

[@curtisjudd]

The real question is, where is the Tascam x8 so that I CAN review it? Still waiting for my pre-order to show up.

[@mitrihakkinen6498]

Thanks for the good video. Any idea if this Rode VideoMic Go II is much more directionality than the Rode VideoMicro? For the run and gun videos it would be nice if the mic would take audio from the sides as well.

[@curtisjudd]

My guess is that this is just slightly more directional than the Video Micro.

[@RobKristjansson]

Great review, Curtis! This mic might be perfect for our Parking Lot Reactions series. To Amazon!

[@curtisjudd]

Hahaha! 👍

[@RuXTaR]

So, between this and the Deity D3 (not the pro), sound wise, which is better?

[@curtisjudd]

Not sure, I haven't tried the DEITY D3, just the D3 Pro.

[@CoolBikeProjects]

Great review Curtis, i’m still confused as to whether or not it can take power from a cameras USB C port? Specifically could be used on a BMPCC 4k or 6K camera?

[@BradleyLayton7]

It can be used on either of those cameras with the included 3.5mm cable. Unsure if those cameras allow audio to be recorded to them via USB though

[@CoolBikeProjects]

@@BradleyLayton7 yes but can it pull power from the camera to run the mic? The mic needs power on a bmpcc

[@BradleyLayton7]

@@CoolBikeProjects the 3.5mm cable powers these small mics. The larger versions he mentions in the video usually have integrated batteries for power, and ones bigger than those are usually powered off of 48v XLR cables

[@rodemic]

Hey! Yes, the VideoMic GO II can take power from cameras with a USB port, but you can only record via USB with a camera that has a USB audio input (most current cameras like the BMPCC 4k or 6K have a USB data port only, so you will still need to use the 3.5mm output to record).

[@CoolBikeProjects]

@@rodemic thank you for the clarification!

[@GB-AK]

Do you think would work good with the Rode go to boom the mic and record a camera without wires?

[@curtisjudd]

I would think yes.

[@IMDABROWN]

Those last few seconds is what happens in my house whenever I buy gear.

[@curtisjudd]

Ha!

[@GlennVanderbeke]

Thanks for this in dept video 💪🏻 grtz from Belgium!

[@curtisjudd]

🙏

[@ExposurePictures]

Can I use usb c to usb c direct to the camera, like Sony A7S III?

[@curtisjudd]

No, not via USB, but you can just plug into the 3.5mm microphone input instead.

[@olegpopov3890]

Curtis, thanks, veru useful and professional

[@curtisjudd]

Thanks Oleg.

[@rapkaltech4624]

Finally I can see you review this mic. Been waiting long for you to review this mic

[@curtisjudd]

Just received it last week. Glad I did!

[@M0LLER75]

Thank you for all the tests you do. What do you think is the best professional on camera microphone today if you want it to be a bit directional and not so sensitive to hand noise from the camera. This is meant for brodcast audio, I am using MKH 416 today. I like it well but get light hand noise so I have to use an extra holder. Plus it is starting to get old so there is probably something better. Does not think Sony ECM 673 works well enough because it gets too wide. What are your tips?

[@curtisjudd]

Thanks Svend. I don't have first-hand experience with the Sony so I'm not sure about that one. For handling noise, I think that's more about the shock mount you use. Yes, some mics are more sensitive, but I've found the MKH416 to be pretty decent on that with a good shock mount (CineLa or Rycote).

[@M0LLER75]

@@curtisjudd thank you for your answer

[@philupwithfood]

Great breakdown! Didn't realise the mic was compatible with the rode connect software. I was considering this but instead I ordered the rode ai-micro so I can take advantage of the software with my video mic pro. Helpful vids every time. Thanks!

[@curtisjudd]

Thanks Philip and happy recording!

[@travisgillespie2819]

Very helpful, thanks for sharing 👍

[@curtisjudd]

👍🙏

[@scb2scb2]

so are we getting the answer how many mics do you have :)

[@curtisjudd]

It is an un-answerable question. 🙃

[@joelmulder]

So how much more is "a little bit more directional" when comparing the GO II to the VMic NTG

[@curtisjudd]

If you’re 2 meters from the sound source, you’ll pick up maybe 1 or 2dB less ambient noise.

[@joelmulder]

@@curtisjudd Thank you, that's a big help!

[@nickglover]

I am very curious how it compares to the Deity V-Mic D3, but it seems like everyone has forgotten about that mic lately.

[@curtisjudd]

When you say how it compares, I assume you mean how it sounds? You can cue up my D3 Pro review in another browser tab and A/B play them for comparison: kzbin.info/www/bejne/jWq2lZhpmt5locU As for features, the RODE’s USB features are far richer.

[@nickglover]

Sound, noise rejection, etc. But you are right, that gives a good enough idea. Thanks!

[@Sundevil0003]

Great video Curtis and very helpful. Any thoughts on if I boom this above me if I might be able to pull off zoom calls while using speakers instead of a headset? I’ve heard some people have had success with this, but others say it’d cause too much feedback.

[@curtisjudd]

It depends, there isn't a one-size-fits-all answer. Zoom does some active work to make sure that audio from other participants that makes its way into your mic doesn't end up back in the call. But it isn't perfect. It MIGHT work if you keep your speaker volume low and you position the microphone just right and your room doesn't reflect too much of the sound from the speakers, etc. In other words, it isn't guaranteed to work flawlessly.

[@Sundevil0003]

@@curtisjudd Thanks Curtis. I may give it a shot and if I have to add some sound deadening material in the room do so. I had been using airpods, but having to charge them every ~2 hrs is a major inconvenience. If I can pull off zoom, webex and facetime calls using this mic and have the added versatility to take it on the go would be a great tool to have and solve several problems. I appreciate the insights and I’ll see how it goes.

[@gcprost]

Thanks for doing this. You covered all the things I needed to know. I have three other shotguns but I needed a fourth to shoot a theatre-in-the-round with four cameras.

[@curtisjudd]

👍 Happy recording.