Longer Lasers Ray 5 & B1 Compared

In this video, we're going to compare the Longer brand lasers. The Ray 5 and the B1 lasers. We'll talk about the differences between these two lasers and see which one is the best for you!
If you're looking for a laser, then the Longer brand laser is definitely worth checking out. We'll compare the Longer Ray 5 and the B1 lasers and see which one is the best for you. We'll also talk about the benefits of each laser and the best ways to use them!
Where to get one of these lasers: s.zbanx.com/r/CxVWkVFhcFWw
Accessories: s.zbanx.com/r/diVNi3556JSa
The above links are affiliate links and I do receive a small commission if you purchase. However, this does not increase your cost.
Link to mounts and risers for the Ray 5:
Basic mounts: moonshinecrafts.com/product/l...
Riser mounts & risers: moonshinecrafts.com/product/l...
Cable support loop: moonshinecrafts.com/product/g...

[@angelvazquez288]

thanks Roger i love your videos

[@mrgrinch61]

Nice thanks

[@okin8949]

Hi Roger, greetings from austria. I have a Longer B1 and the one thing 1 hate is the screw for adjusting the z-axis. Now there is no alternative for the B1 but i found a adjustable plate for the Ray 5. Are the screws on the module backside identical? If so, i could order the Ray 5 Adjuster.

[@rogersshop]

No, they are not. I agree with it not being in the best spot to get your fingers on.

[@okin8949]

Thank you - i hope some better solution comes up soon.

[@victorsimerson1095]

I have ray 5 10 w where would I get a 20 or 30 watt head and do I have to change plug in

[@rogersshop]

Upgrade heads are sold as a kit with necessary cables, upgraded power supply, limits, etc.: kzbin.info? s.zbanx.com/r/diVNi3556JSa

[@allanmclellan2807]

Good day. Pls delete if not allowed. I have a Ortur LM3 and its not cutting correctly. A circle size on X and Y axis differs by 0.02mm but diagonal differs by 0.5mm. Any way I can fix it, only got my laser about 2 weeks, so titak newby. Thanks

[@rogersshop]

Check that eccentrics on rollers is set correctly. Tight, but not so tight that there is resistance when moving. Check belt tension as well. Both of these can contribute to the problems you have described.