Rogue folding squat rack

[@Max-fh6ht]

I have the same rack and it’s great! I noticed the rack doesn’t actually touch your floor. If you lowered the whole thing down an inch you’d be able to place way more weight onto the rack as the weight would go down into the floor instead of hang off the wall. It’ll also make the rack much more stable. The rack won’t scrape the floor as you move it either as it’s designed to be lifted up and moved, then placed flat on the ground when it’s in position. Hope that helps

[@dougcoleburn1579]

So do you have one? That was my thought on the height of the rack extensions. Also I need to Mount to cinder block. Was thinking of mounting into wood mounted on the wall first. Thanks.

[@edwardzabala9053]

I love it! Thank you for showing the fold-up. That was the biggest question I had!

[@285runt]

Great video.

[@brickfilmsproductions6453]

Question....you have this in a garage with a cement floor. Could I put this in a basement with a carpet - or on top of a pad over a carpet? Would sliding it open an closed wear tracks on my carpet? Or does it just sit on top and barely graze over?

[@crunchyblack2224]

Great video, thanks for sharing. 👍💪

[@MrBCurtis]

Nice Job. I’m sold.

[@akatsukilove8884]

Which exercise is king of all exercise?

[@bull5919]

good video keep them coming

[@piratecap11]

Thank you I’m thinking about purchasing one

[@davidwest973]

Is there anyway to measure the rack width wise when is setup(off the wall) to also laying flat against the wall? Reviews and description from website are hard to determine. Just trying to make sure it will fit in my garage before I purchase it. Seems like a great rack!

[@futbol1972]

Man iam debating between yours and the RML-90SLIM The 90SLIM will fit right between my wall and garage door rails. If I get the foldable one like yours I have to cut like 7" off one of the uprights so I can open it and fold it. Also the slim is only $320 compare to yours or the PRX short 73" which I like too. The only difference I see between yours and slim is that it folds, comes in color with numbering on uprigjts and has 21" bs 15" of space between wall and rack... I don't plan on folding it ether. Don't know what to do been thinking and doing research on these 3 racks for a month, the RML-3WC, the 73" PRX and the RML-90SLIM.

[@Invis_Space]

I’ve just ordered one of these. They are not suppose to touch the ground?

[@futbol1972]

Iam debating between this and the 2x3 foldable and a full rack...will foldable racks take as many accessories as the full rack and does the 3x3 has more acessories than the 3x2 foldable rack?

[@shabblabbat]

thanks for folding it. I'm still trying to find one where they fold both inward!

[@parmanduke]

Look at the Ethos sold at Dick's Sporting Goods

[@KevyoKAJ]

Do you have a pic or can you show the 41.5 depth folded onto itself? Finding a pic of someone who has folded the deeper setup seems to be the hardest thing to find online. Their website says there's a slight overlap, but I'd like to see what that looks like. Thanks in advance if you can.

[@cjhenry0101]

Agreed I’d like to see the same pic. I’m looking at the Full model as it folds inward, has 4 uprights plus it comes with safety straps.

[@KevyoKAJ]

cjhenry0101 I was able to go on Reddit and ask the same question. One of the guys who owns the 41.5 took some pics. It’s not great compared to the flush mount that the 21.5 does, but it’ll work. Take a look here: www.reddit.com/r/crossfit/comments/gy1q7z/rogue_wall_mounted_rig_vs_power_rack/?

[@cjhenry0101]

Kevin Jones thank you so much. You saved me a ton of time. The overlap isn’t too bad. Why they wouldn’t have a pic of that on their website is beyond me. I’m torn between the 41.5” RML-3WC and the RML-3FULLW. For me the difference in price shipped is $1,053 (including 2.0 safety spotter arms) versus the Full shipped at $1,506. $453 difference

[@KevyoKAJ]

cjhenry0101 that is quite the difference. I ended up ordering the RML-3W since I can do my squats and bench on the outside part rather than the inside. The depth was important to me because of my height (6’2”) and need for space for things like kipping pull-ups and toe to bars. I know you can order the other type of spotters on the RML-3w. Maybe compare the price of those spotters against the ones you’d add to the FULL. I guess it comes down to where you want your spotters (inside more like a rack cage, or external on the outside uprights.)

[@Skittlezz45]

What did you use to mount it to the concrete blocks??? Running into the same issue. 5 inch concrete block foundation in my garage and I cant get the beams bolted low enough (since 2inch holes) without interfering with spotter arm positioning.

[@nickshobbycorner]

Did you find a solution?

[@futbol1972]

We do a lot of peg band work, rack pulls etc, etc. Can I do these exercises on this foldable rack? .I'm debating between this one and the HR-2 half rack just because with the half rack I can attach bands to rack pegs to do workouts and also do rack pulls..well let me know. Thank

[@tino10k]

Looks like you can attach band pegs to the bottom bars for use if you squat inside the rack, if you squat outside of it you can tie the pegs around something like a set of heavier dumbbells.

[@Dober87g]

Is that the 40 inch or 20? Distance from wall I mean.

[@futbol1972]

Hello just talked to prx and they told me this rack does not offer west hole spacing (1")?? Been reading a lot and some people said they had to put something under bench to adjust their bench for benching because they dont have west hole spacing?? I have read this is one of the most important features of a rack?? Will it be an issue if I purchase one of this prx racks ?? I have a full rack right now with west hole spacing and I can see why is important when bemching

[@imatroll2428]

Nice. Is there a way you can silence the movement in the rack? I workout early and that will get me banned by the wife

[@eliasc.8631]

Does this scrape your floor?

[@idw85]

I noticed you had to ditch the 2nd rogue stringer for the bottom. You have a makeshift stringer. I have a concrete slab to where the top bolts would be in studs but the bottom would have to bolt into the concrete slab. I’m not even sure how or if it’s possible or if I have to return it for a refund. Any ideas?

[@Rampagejake2030]

I’m having the same problem, let me know what you did. Thanks.

[@MxPxRobbie]

He's got the Rogue stringer on the bottom.

[@squatch570]

@@Rampagejake2030 I have a concrete pad that sits 4 inches above the garage floor. I bought a Rogue RML-3W folding wall mount rack just over a month ago, set it up and have been using it since. Although Rogue has standard dimensions recommended in the installation instructions for their stringers, they can be raised as needed to accommodate the concrete pad height but you need to remember that the horizontal arms need to be mounted higher on the uprights to match. There are numerous holes for different height configurations so there should be no issue getting it all to line up and function. It also does not affect the stability or safety as long as you have the stringers properly and securely mounted to whatever type of wall structure you have. I have wooden 2×4 with drywall covering. Also, I was able to mount the top stringer at the standard height in the instructions and only moved the bottom up as necessary. Good luck and feel free to contact me if you need additional info. I can send some photos via PM if you want to see what it looks like with the modified height.

[@ashontayowens8010]

did you use any other type of bolt to screw into the concrete and how high did you mount the bottom stringer?

[@erichodges70]

I mounted pinewood to attach stringer to used same 8 screws and washer that came with set to drill in concrete

[@ashontayowens8010]

@@erichodges70 awesome thanks for the quick reply

[@jamesr8208]

@@erichodges70 would you mind emailing photos? I have a 4 inch slab at the bottom, but have considered moving the bottom stringer higher so I go all into wood.

[@jsanti8572]

What if your garage has a slight slope?

[@erichodges70]

The bottom can be raised to not even contact floor and still hold weight even

[@DJjosher]

That rack is installed wrong. You’re missing the footing that attaches to the bottom of the legs to help stabilize the frame. That rack is capable of much more weight.

[@erichodges70]

Thanks is the lower attachment a separate order I had no idea

[@DJjosher]

Actually, I apologize. The brand you have is different than the one I had in mind. Sometimes a footing mechanism clamps down and helps the footing stay in place. The one I’m referring to is the Ethos foldable wall rack.

[@joseluis7808]

How tall are you?

[@erichodges70]

6ft

[@joseluis7808]

@@erichodges70 Cool, Im 5'10 and I like to be off the ground abit when I do pullup so this will work just fine. thanks.

[@GCSalinas]

Too much work to fold away. The PRX folds up easy with one hand!