Roland TM 2 - How Do We Record Triggers With It?

[@lcd4349]

Great tutorial. I have been thinking on using this method for live applications. Thanks for laying it out in Black and white 🤘

[@CameronFleury]

Not a problem! Thanks for watching!

[@ZaxDrumsGolfandMore]

It is cool all the stuff you can do with triggers!! Cool video Cameron!!

[@CameronFleury]

It sure is! Thanks for watching! 🙏

[@dadmetal6856]

Was havin an issue with my files being in 24 bit accidentally. Your vid was a way easier solution (16bit) than any manual. Thanks for bein sick dude!

[@CameronFleury]

You're welcome!

[@kadenfletcher9814]

Hi Cam. Can you please explain more in depth how to get the trigger signal the daw? Do you have to use FX or can you simply use the chsnnel imput mono? Thanks brother.

[@Jfowl561]

How do I remove the metadata from the samples? I got the wavfile but it’s still coming up at 48khz and 24 BPS

[@SuperMaky15]

Hi, could you advise me where to get samples ? :]

[@redlightclinicdrummer]

Yo I can just take the on trigger, plug them into my interface, plug in headphones and hear them right? No module is actually needed? Do they have built in sounds?

[@boydagust9179]

hi can you tell what kind of preamp are you using? and what brand? thanks

[@PatRock1983]

are these samples still available?

[@facebookpersonal]

Bro, just a question!!! Where can I find those sounds?

[@mincemeat9830]

Where do you get the sound samples from?

[@pamujigesang1845]

hello, can tm 2 be commanded with midi input from the keyboard? thanks

[@blastbeats5000]

No midi to daw? That's what im lookin for but i assume its the same. Thanks for the vid!!

[@elyamzon]

Thanks for sharing. Where can I get good sounding kick and snare samples? Thanks in advance

[@GG-gr2px]

So, this thing is just ON/OFF triggering of sounds? No velocity variations? No dynamics? I guess they are only good for loud drumming, not slow or sensitive parts, right ?

[@JoeH1538]

Thank you! This was a major help for me. Clear explanation. Subscribed!

[@CameronFleury]

Thank's Joe! Glad I could be of any help.

[@MeggeraBand]

Hi man! Thanks for the video! When you record the kick drum and trigger signal together, does there be a phase problem?

[@paulsabong]

Where did you get your kick samples? Or how you edit your kick samples? Can you make a video tutorial for it?

[@CameronFleury]

A lot of the samples are from an old module and from the Tm-2. You can edit them inside any DAW, you just need to make sure you export them at the proper bit rate.

[@Metalordband]

Hi man ! Thx for the video ! I use footblaster too... what kind of pad (type pad) did you chose in the roland tm2 option ? Did change something ? Thx !

[@joaberios]

Great video! Can I add an entire song in the SD Card and use it as a guiding track for drum covers?

[@a.r.7124]

yes you can.

[@HeavyFoot88]

just wan to ask if i use the foot blaster van i use the cable that out from both kick trigger but eng to one input only will it work or not...

[@CameronFleury]

Can't say I've ever tried it! It would be much easier to just buy a second cable.

[@HeavyFoot88]

@@CameronFleury alright thanks man

[@overduemedia7508]

Hallo bro,nice content,can u please recommend an edrum module,that supports saving ur performance in midi on an SD card..?thanks in advance

[@johnnycastrocastropardo7606]

Amigo burn dia..puedes hader el tuturial nas despacio

[@gastonjabaly]

Awesome man thank you i just got this unit new and because it alouds uploading custom samples its a hard piece to come by on the used market because it never gets obsolete like the alesis or yamaha modules thanks again ill be uploadi g my own sounds and one day will play like you lol

[@CameronFleury]

You're very welcome! Keep at it, and check out my free mini courses if you want to improve your drumming: academy.cameronfleury.com

[@giannispan8129]

Can the Roland TD17 be connected to the Roland tm 2 with a midi out cable so I can have the sounds of the TD17 on the tm2 directly with a midi out cable?

[@CameronFleury]

That I'm unsure of! I've never tried it myself.

[@giannispan8129]

@@CameronFleury Knows how I can put new sounds (Tom 1 2 3 4) in tm 2?

[@CameronFleury]

@@giannispan8129 check the manual that came with your tm 2. You may have to address specific midi notes for each drum.

[@horner1641]

Said SD card error.. i hate technology lol. Any idea why it would reject and SD card?

[@CameronFleury]

Did you reformat the SD card?

[@horner1641]

@@CameronFleury No but i'll try that, didn't think of that but i'm used to having it in a gopro alot thinking about it. Thanks 🙏

[@griffstix]

How to I reformat the Wav files? I have the samples I want but I'm not sure how to get the file to 44.1 htz and 16 bits

[@CameronFleury]

You can reformat inside the tm 2. Just make sure you don't have any files on the SD card thst you need.

[@MasQueVencedorEnCristo]

Just subscribed this is the closest I’ve seen how to wire the foot blasters to my module

[@M4RCM0NT31R0]

Where do you get your kick samples?

[@CameronFleury]

Take a look in the description of this video!

[@M4RCM0NT31R0]

@@CameronFleury Cool! Thank you!

[@MarkBayfieldvillageidiot]

Agree with valent666, great informative video, i love the intro tune dude

[@CameronFleury]

Thank's mark glad ya dig it!

[@lucasmellodrums3580]

Very good explanation! Could you share your samples? Im new to tm2 and those type of electronic things on drums.. thank you for the video

[@simcajon9445]

hi, I have recently got the TM2 and I wanted to know if it is possible to use the effects (delay, reverb, distortion, etc.) with the trigger alone without selecting any sound

[@CameronFleury]

From what I understand, those effects can only be applied to a sound that is already being triggered. Don't quote me on that, though.

[@mellowtron214]

This was very helpful, I’m considering buying the exact gear in this video (foot blasters/Rol Td2) but not to record, to listen to as I drum on a mesh head kit. Do I need anything besides the triggers themselves, a cable to run from trig to module, and the Td2 mod? Oh and headphones to listen. Does the Td2 have any decent bass drum trigger sounds? So I don’t have to import anything

[@CameronFleury]

Just a 1/4 cable for each trigger you use. Headphones of course, and the samples on there are alright to get you started!

[@anilbarad2374]

And how to take it into storage

[@dimmanj9555]

Thanks for great video. Do I need to always have the sd card inserted or can I save my wav kick in the tm2?

[@CameronFleury]

That I'm unsure of. I've just purchased an SD card that lives in the tm2.

[@supermariodrumflow]

Dope. Thx Cam 🤘🏼🎧🤘🏼

[@CameronFleury]

You're welcome! Thank you 🤘🥁

[@Sony4UW]

Hey, can you load your sounds here?

[@CameronFleury]

Send me a message with your email and I can send them over!

[@lcd4349]

@@CameronFleury dang dude, thats super generous! I would gladly paypal you a few bucks for them! I am currently in a pinch with no ability to capture good audio samples.

[@CameronFleury]

@@lcd4349 send me an email: [e-mail]

CAPO MUCHAS GRACIAS

[@valent666]

Great informative video, TM2 .wav's aren't plug and play..Can you make samples wav's and share em? Greatly Appreciated

[@CameronFleury]

Of course you can! As long as they're 26 bit at 44.1khz. Unless of course you're asking for my samples?

[@elyamzon]

@@CameronFleury do you sell your samples? I would be interested

[@lloydhider4584]

Hey my dude, very comprehensive video, but I can't seem to get my DAW to register any signal from my module. Do you have any ideas on what I could be missing? I'm super new at this, just reaching out for some help!

[@CameronFleury]

Good question. Are you sure the routing into your DAW is correct? Is your module output level high enough? Could be anything in that signal path.

[@lloydhider4584]

@@CameronFleury thanks for getting back to me man. i've played around with it a bit more, and i can now receive a signal (but no sound) so I have to add my own effects to the signals. is there an easy way to simply record the sound the module produces? I use reaper through a focusrite 18i20 if that helps at all. (would you even recommend a different daw?)

[@FerristotheBueller]

​@@lloydhider4584The TM2 is only able to connect through midi.

[@FerristotheBueller]

This module would of been awesome if it could be added to to DAW through mixer by simply connecting to input.

[@mapex75]

Subbed🤘

[@bsounds3485]

U the best man

[@suriellorenzo329]

friend give me samples Kits for bass drum

[@ClarkStar866]

kendall was the goat for that pack

[@richie7782]

Man it’s 2021 you think we’d be able to do everything with an iPad, module and drums but no!!! we still need a laptop or home computer to upload drum programs!!!

[@SauceGod666]

I have question/issue, when I export the kick sample wav file on on to my sd card and turn on my TM-2 the exported file shows on my module and ill get the kick sample in on 1 but 2 has a different sample but its all under sample by name

[@CameronFleury]

So, both input 1 and 2 have the same sample name addressed to them? You need to go back through the manual to make sure 2 things are in order. You need to make sure that your samples are the correct bit rate, and you need to make sure that your settings are properly setup. If you don't have a manual then follow this link for a digital version: www.roland.com/ca/support/by_product/tm-2/owners_manuals/