Roland VersaCamm VS Series: Limit Initialization - All Graphic Supplies

In this tutorial video one of our Roland Certified technicians will instruct you on how to perform a Limit Position Initialize on the VersaCamm VS Series. During the procedure you may run into an 'Unrecoverable Limit Sensor' error. The cause of this is an unlocked head during the 'Setting Up the Limit' part of the procedure. When locking your head into it's capping position, wait for a single click and let go of the head. If the head is able to move to the left after this, it is still unlocked and you will not be able to proceed.
If the limit position is not correctly set, it may cause problems such as carriage lock and capping position errors. Also, if the cutting down position has not been properly set, you may have issues when performing a sheet cut. The Limit Initialization procedure can also remedy errors such as 0101 Limit Position Error and 0110 Linear Encoder Error. Only perform the Limit Position Initialize if you have been instructed to do so by a Roland Certified Technician.
All Graphic Supplies is dedicated to providing you with unlimited possibilities. That is why we are offering these free video tutorials on machine maintenance in order for you to keep your printers and printer/cutters in top shape for you and your customers.
We also can provide you with supplies such as digital media, inks, finishing tools, accessories and much more. For all of your support and servicing needs, visit www.allgraphics...
Subscribe to stay up to date with all of our new videos.
Follow us on Twitter: / agscare
Become a fan of All Graphic Supplies on Facebook
Visit the All Graphic Supplies Solutions Blog at AllGraphicSupplies.com/Blog for more tips, tutorials and up-to-date information on events and more.

[@DavidKing-cn5yh]

Help please, when i go to enter after it says setting up the limit then I click on the enter it keeps saying remove sheet?? There is no media on the platen.

[@Chris.-209]

how do you solve this? i have the same problem

[@Teknakill]

I followed the steps (even from the roland DIY pdf) and when I turn the machine on into service mode it always displays "SETUP SHEET". Any help would be appreciated. Thanks.

[@saidrambarran3974]

Roland vs300 when I power on the machine it shows service call 0004 . I try to push n hold the 3 arrows + power on but it still gives the same error any help pls

[@danarhenderson505]

what happens if your carriage is still attached to the head. I am not able to separate those 2. I'm getting service call 0101 on my roland sp300v

[@Teknakill]

How to set it up from the setup menu?

[@shahedahmed9737]

I had same issue about "remove sheet"? There was media? What sheet? Anyone?

[@hamidoumaiga7407]

Bondjour