Roller Speargun How to make Load Assist

nautilusspearf...
Hope this helps some of you guys out there!

[@rvierra7235]

Excellent tutorial on rigging this type of system. Thank you.

[@warriorrootsbullies]

Self-constricting knot? Sheet bend?

[@saidhamad9772]

Thank you for this video I’m really interested ❤️ May God protect you❤️

[@over1498]

If you could do a video on how to rig the line on this type of Salvimar roller (same one on a few of their guns), I'd be eternally grateful. Their instructions are less than worthless.

[@fidodidoz]

Hey Andrew if you can show us a method how to measure bands for different guns length as well ass thickness and best setups that includes shafts .thx

[@mimcan70]

Hello.Thanks for all your intros.What should be the length of 3.2cm dyneema underneath between trigger and elastic bands for best performance? For salvi metal 95 roller..thanks bro.

[@Dilly_Diver]

Thanks for the video, would you say there’s a noticeable noise increase with the roller assist or is that why you went with a thicker dyneema line for it? Thanks

[@over1498]

There's actually less noise on a roller gun, it sort of accelerates the shaft out the muzzle more gradually, rather than BOOMing it out the muzzle, if that makes sense.

[@Dilly_Diver]

That makes perfect sense. I was curious if having that extra 6 inches of dyneema(the load assist) cutting through the water when your shoot would make any noticeable sounds, since a roller is inherently quiet but it seems like it doesn’t. Thanks for getting back!

[@over1498]

@@Dilly_Diver Oh, the roller ASSIST, I misread, sorry. And I don't know, but I think I'm going to try this out!

[@machetesulaco]

what is your opinion on this rifle? im about to buy it

[@samartkansisiad3941]

Thank you Bro

[@francistein21]

Hello there. What are your thoughts on putting a roller muzzle into the salvimar v pro 75?.

[@навигаторд]

Добрый вечер подскажите пожалуйста чем лучше роллер от обычного

[@gih9416]

I decide to buy salvimar roller. Thank u. How can i make 2 bend roller system?

[@sparcousa]

Can you do a review of the Salvimar Roller pls?

[@NautilusSpearfishing]

Its comin

[@leowania1852]

hi can I have the link for the roller kit.

[@ISMACGREYSUB]

crazy friend..always like andrew..hahahaah!!!"

[@robertgebken7675]

still no review on the sal metal roller though

[@NautilusSpearfishing]

We have some here... not sure if they are on the site

[@simon1234567ful]

Looking to buy a salvimar hero they offer a roller what do you think about the salvimar rollers?

[@NautilusSpearfishing]

they are nice :)

[@simon1234567ful]

@@NautilusSpearfishing ok great thanks :) do you stock the salvimar hero 115 and the roller head? And is the standard muzzle easily removed from the hero? Id like to be able to use the normal version as well as the roller version.

[@NautilusSpearfishing]

@@simon1234567ful We do stock them normally, the muzzle shouldn't be to much of an issue to remove with a bit of tough love ;)

[@simon1234567ful]

@@NautilusSpearfishing ok so the muzzle is only held in place by a screw and the o rings and not glued or anything? If thats the case ill stop by and have a look and then gun and'll probably pick it up 😃 That way i wont have to choose between roller or standard but can switch it up depending on what i want 😃

[@sparcousa]

Hey man, I recently got myself a salvimar roller + reel however to my surprise after shooting/shaft disengaged, the gun does not float. Unlike my Salvimar Hero/Metal. Do you face the same problem? Is the gun too heavy? Any reviews from yourself or any of your customers?

[@NautilusSpearfishing]

You prob got a short speargun? Reel also helps add weight to it if it is 85cm or shorter will prob sink.... Not enough air inside the tube. :O

[@sparcousa]

@@NautilusSpearfishing ahhhh perhaps you're correct. Gun is short 85cm. Thanks bud. You're the man!

[@BacardiBreezer23]

Hey Andrew! I was wondering if it would be a good idea to put a MVD Roller System on the Salvimar Metal Atlantis 115cm...would the trigger mech hold strong? What is your opinion between the MVD Roller Pro G2 Dual System, MVD Roller Compact G2 Dual System or the plain MVD Roller Pro G2 Ball Bearings vs Salvimar roller on your video? I'm planning on buying either the Salvimar Metal Atlantis 115cm or the Seac Sub Guun 30 Makaira 115cm and putting a roller system on it.. but I am undecided..

[@NautilusSpearfishing]

Why not just make one out of a carbon barrel? :o We have em for around $90...... either way the G2 pro bearing is the better one, but they all work well in the end. The Salvi metal trigger will hold no problem at all..... the Salvi is a better speargun than the Seac ;x

[@BacardiBreezer23]

I have thought about that! It's just that I am not State-side right now and won't be until around Spring time.. It's not easy to get parts over here in the Azores as everything is shipped and takes a Long time to arrive.. How about the Pro G2 Dual System? is it better than the Pro G2 ball bearing? I am def leaning for the Salvimar for sure! And more so right now thanks to You! :) Plus, I've got an amazing offer for the Salvimar Metal Atlantis...$150+shipping any length from 115cm to 145cm... I'm leaning for the 115 or 125cm as I mostly go for the rocks and down to 60ft clear blue water... We get huge AJ's and Wahoo over here...115 or 125cm with the roller setup would be perfect I believe, would you agree?

[@NautilusSpearfishing]

I think so :o

[@firefightergarcia]

More importantly what's the status of your truck is it finished yet?

[@NautilusSpearfishing]

Haha not yet.... -___- almost

[@honyeechou818]

I m looking forward for your teview

[@GodlikeNelsoN]

nice :)

[@iwanwan7249]

Verygood...... Next

[@uaisub]

and write on my channel😎