ROLLING FENDERS: How-To & Don'ts by A Professional

[@Tapport]

Just found the channel and have been watching all the 350 videos. I want to say that I seriously appreciate that you show us your cars and bring the viewer along for the ride without being super fake and over hyped like a ton of vloggers. Some of us don't need or want to be treated like kindergartners while we watch a car channel so it's really refreshing to find that. Keep up the content and you'll be up in the hundreds of thousands of subs in no time.

[@austinXonXfire]

I like that this guy said “malleable”, good professional word choice.

[@marcov9808]

wat

[@__Natur222]

Yes

[@fallengamingtv6945]

Agree

[@Darknamja]

Without a doubt the "Word of the Day".

[@juangaribo4831]

Such a common word lol??

[@emilierichard2008]

I love it when they show you how to do something but they're not showing you the final result

[@blazarchzagnatz7506]

For those who are curious about the fender temperature: From the Eastwood Fender Roller manual: 7. Use a heat gun to gently warm the paint to about 120°F in the area to be rolled (to prevent cracking). I also read that an infrared (IR) thermometer can/should be used to measure the temperature. Good luck!

[@bn880]

I'd probably shoot for 120C :D

[@kovid5274]

thats crazy im back to watching your videos... i watched this when it came out 5 years ago when i was still 13-14 writing up lists of car parts for the car i "was planning on buying in 3 years" which none of that happened but your videos still inspired me and got me really deep into cars and i actually bought a 300zx not a 350z like you made me want but i love my Z and i remember lots from your videos on this build specifically and man can i say i love you and your channel! i was just looking up how to roll the fenders on my car and this popped up and i was like nooooo way im finally in deep enough to where this video is helpful and not just a 13 year-old watching with dreams to be able to do this stuff LOL

[@misterbulger]

Its always good to watch people do things the right way after I just did it the wrong way. I just went to town with a 28oz framing hammer and rolled it out almost two inches to fit some tiny 14s. It looks pretty good! I cant believe those tires fit now. Look at you guys all professional... This car normally has 12" wheels so I dont know if your tool would even fit in that tiny wheel well lol. I also cut that lip a bit so it would bend back easier. Unfortunately I do have paint flakage but it just matches the rest of the bad paint now. I doubt you could roll it that far without paint flakage.

[@KamIsFam]

Don't forget to clean out inside of the lip with a rag! Dirt and other shit gets stuck up there and can mess up your clean roll.

[@SSAVAGEPICS]

I absolutely love the way your 350z is coming out, and am totally inspired by your passion of making videos! I have started a KZbin channel of my own! Keep up the good work man!

[@micahstull2521]

Your Edits are DOPE!

[@yeetskeetledeet8184]

*uses acronyms to describe his mods* Me: “yeah totally, I know what a akdgdnshd pressure sensor super emissions container delete is” 😂

[@Wrought_Iron_Wolf]

Nice to have good AZ contacts for these types of modifications. Keep up the work, great vids man!

[@kuatay17]

Know anyone in Tucson Az who can roll mine?

[@BPoweredLove]

@@kuatay17 Check your local Craigslist.

[@josemitchell-reyes3598]

@@kuatay17 hey bro did you find any I just moved out to Tucson.

[@unsaltedcracker2866]

thx for this vid i just rolled mine turned out great took 5 hours tho bc i didn’t know wtf i was doing

[@kylecrumbaker328]

yo im gonna roll my fenders for the first time like tomor. do u got any advice for i dont fuck up the paint

[@YoungGearHeads]

Nice video, I got cracks and i used heat. More heat? Cracks in the paint just on the bend.

[@M471K]

The wheels still looking good

[@ali.3is125]

4:36 buddy said gnarly wheel setup I am in. Subscribed ✌️🤣

[@zoofkush23]

How long should you heat the fender before beginning the rolling process?

[@codybitterman9387]

Till the paint has softened up but not burning

[@jeff_the_panda9034]

Put the top of your hand near the metal and it should feel hot or really warm

[@joshXnovak1]

Revisiting this video because I’m about to put some wide boiz on the 300zx I submitted for review a while back. Thanks for sharing your experience and knowledge with us, Cameron! Congratulations on the play button!

[@HochstartHarry]

I just had to de-install my spacers 25mm (hubcentric k&w) because my fender dug so deep into my tire in a drift that it popped the tire

[@Aint1S]

Never seen your channel before and you completely changed my misconception of you... Stand-up kinda guy. 🤙🏼

[@demitrioushicks6777]

biggest fan out of AZ

[@doviangraciano4359]

Eastwood makes bats too lol

[@NiccoDiazDesigns]

Shout-out from Mesa!

[@lashlarue7924]

This here M’F’er knows how to roll! 😎

[@va2_lee]

So you can roll the fender with the bumper tab part without risk breaking it off? First time doing it so curious question...

[@RotchildFrancoisJr]

That STI sounds amazing!

[@mattdrifts]

a shame about the equal length headers the best part about the boxer engine is the rumble you get from unequal headers

[@BigBennettTV]

OMG cameron, I just rolled the fenders on my car but I used a baseball bat and a tellaphone book. I wish I would have seen this video befor I did that because not I have to use fenders flares.

[@RaymondSerafin]

A rare cloudy day in Phoenix

[@paddygall6797]

If your fenders need to rolled but aren’t would that cause like a clicking and clunking type noise ?

[@upinsmokeproductions6471]

Yeah, you'll be able to hear your tires hitting the fender almost every time you have to turn

[@HornyHamster]

@@upinsmokeproductions6471 ohh ok ok makes so much sense now

[@DR-jl2uy]

Great educational video thank you guys

[@gebot.]

New to the car scene. What size wheels and all those number should i get. My car is stock not lowered or anything. I just wanna buy some nice rays that will fit real nice on my Z

[@Leeoh949]

GE Bot 19” by 9.5”

[@JAKWEES]

The offset of the wheels is most important

[@kominy100]

@@JAKWEES an do you know what the off set should be on range of? I don't have too much knowledge on the mechanics of cars neither and also just got my hands on my own 250z!! trying to find out the do's an donts in general for the 350z

[@f3irty278]

I'm sure you won't listen, you'll have to wait and see yourself, but a nice set of aftermarket wheels with more aggressive offsets is NOT going to look nice if you're not lowered first. And saying "go 19x9.5" means nothing without offsets, offset determines how much your wheels will poke out from your hub (and ultimately fender). Lowering is by far the best bang for your buck upgrade, do it first. If you insist on not lowering though make sure to search for your pics of your car with aftermarket wheels on OEM suspension that you like and use those specs as a guide, if you follow someone's specs who is lowered it will look ridiculous on stock height, you need a meatier tire to help fill the gap, so 35-40 profile on a 19.

[@Tapport]

Go on some forums/galleries (I like Fitment Industries) and see what other people are running. There are literally hundreds of options, especially if you haven't modded your suspension in any way.

[@Madbooterz]

Yo just bought a Z yesterday, Nismo s tune exhaust, Nismo CAI, and blox plenum, love the inspiring content dude can’t wait for more

[@Madbooterz]

F.B.I 03

[@flux_core_fx]

Thanks bro, great video

[@michaelfarmer-fleming8684]

aye my boy jason is out in peroria. he deives a white st on gold chrome wheels and a carb fiber hood.. if you know him give him a shout out

[@Sam_Obi]

He's really good at it

[@JoseGonzalez-ew6zz]

In AZ you got to get tuned by Clark Turner. One of the best in the Biz

[@InToTheBackroads]

Yo I live in Phoenix how much dose he charge

[@Leyenda_Workz]

What do you suggest to repair a fender metal split from the inside?

[@rg_barrow]

He said Phoenix AZ and I subbed 😂

[@jonathanjr1894]

Same lmao 😂😂

[@domingodeanda233]

A toda Madre Mr. chingon

[@jacksonfire92]

Where can I get this done? I have never heard of this in my life but my car constantly eats tires due to rims

[@_IMNNO]

I can’t believe 2019 is already 5 years ago. 😵‍💫

[@kendrick_on_4s567]

How much does he charge to roll the fenders I'm out here in Phoenix Arizona to

[@quantumleap4023]

Hit him up on ig

[@tomascortez9799]

I dig the wheels bro!!

[@supersabrosinho]

3:19 you scared the hell out of me. I thought you pulled out an angle grinder for a second lol

[@thewedge8823]

will this work on fiberglass fenders? I'm afraid to try it

[@Shaolin0871]

The Wedge just trim and sand fiberglass man.

[@cocorkiller2322]

How to roll fenders- buy a fender roller

[@_JoeMomma]

Step 2: roll fenders

[@cocorkiller2322]

@@_JoeMomma killing it!!! Almost like we know what were doing 😉 lmao

[@MichaelMartinez-ef2ry]

Noticed the D backs hat. Are you in AZ. I’m in mesa and need this done to my Altima

[@kawataufeek400]

How much that ? Can use to build the fender from the start?

[@Gumorisco11]

How much do they charge people who do fender rolling? I live in California I berly installed 18inch wheels on my IS 300 and my front wheels are hitting my fenders

[@mjspeedzone5532]

After ypu roll a fender is it still possible to mount a fender liner?

[@BrandonSalas-qm5vu]

I have an infared thermometer how hot are we talking with the heat gun?

[@ryandean5148]

I think like 125

[@powerupjorge]

How long do you heat your fenders with the heat gun ???

[@gdjohny]

hi guys. i know its old video but I want to roll front and back fenders on mu 2008 A5 and was wondering how much i can get them to come out .

[@utoobia]

How long did it take to roll that one fender?

[@oyattaakeem2875]

We’re are you guys located I need some fender work

[@loganvosburg1662]

Will this help with rubbing when turning

[@Thecody503]

Oh sweet! You have the bose wireless headphones

[@jeffm.8275]

The ELH definitely makes it sound like a race car instead of a street car. I love it lol.

[@alexlafreniere6573]

these vlogs are fire. Thanks for this

[@rjaybruhh]

*_This is an art. Fender rolling Is art_*

[@hunger993]

Eh thats a stretch.

[@dangerdude19]

What do you do about the front side reflector??

[@mredwardrandalljr]

Where is the guy located that did the fender roll

[@gabrielcordero8552]

How much would it cost for someone to do this?

[@Pinkielover]

how much does he charge? I live in Mesa Arizona I was thinking of buying the tool its like $60 online.. I'm mainly worried about the rear wheels I'm not sure why it rubbing , They are aftermarket wheels but they're only 18s the car seems to be sitting lower in the rear now could be because I carry some tools but still shouldn't sag that much maybe I should beef up the rear suspension.. I've carried for 500 pounds worth of stuff in the trunk before it would sit low but not like this maybe warn spring... Car is a Mazda six

[@manuelg7394]

BANGERS I TELL YA

[@МусаКавказ]

Мы скоро приедим

[@PerezDaily]

Where can i find center caps like tthat so my spindle doesnt hit?

[@TheQC92]

Go DBacks 🤙🏽 can’t wait for baseball

[@danielmunro1434]

THANK YOU FOR POSTING I WAS DYING FOR A NEW ONE, BTW UR THE REASON I GOT A 350z two days ago for my first car

[@Fullthrottlefilms720]

Daniel Munro do you like it

[@danielmunro1434]

ExpertFX yeah I love it

[@zbrack2271]

Link to the fender rolling tool??

[@hillsidesavage1413]

Do this work with mental fenders or just polyester?

[@derekdecamp1738]

I want to have the fenders rolled by him on my 350z , does he have contact info ?!

[@hhattingh]

Horror! Sheez! That moment you realize you've just destroyed your brand new tyres. No amount of crying, cheap beer, cheesy country songs, at any sketchy suicide truck stop bar can soothe that one away. It stays. I know that feeling and it was with both

[@eddie7780]

Whats the point of 500hp if you arnt going ti go raceing on the track?

[@andyskickz2102]

Will my 350z throw a check engine light if I put on DNA test pipes with a tomei and stock y pipe?

[@Bsanch95]

Marv Reckless yes it will

[@andyskickz2102]

Is there a way to bypass it?

[@asianprodigyproductions5477]

You’d have to get tuned and have the tuner turn it off, I’d suggest saving for motordyne art pipes, they make the most power and the bunges for the o2 sensors are far enough so you won’t get a check engine

[@victormoreno8701]

Save some money and buy art pipes man those dont throw a cel

[@ismileatdeath27]

How do you get the bottom corners

[@brandonfairbanks5764]

You don't have to go to the bottom corners. The tire doesn't make contact there. Only the top of the fenders is the issue.

[@elvergalarga3182]

Lol that's what's happening to me right now but don't want to roll my fenders.

[@mn1907]

I hate sound when it catch tyre I must do it

[@tommyle1703]

Can I roll a g37 with no lip to roll on the rear?

[@WASTED__POTENTIAL]

Thanks for taking the time to make this, but I can you get a cameraman without parkinson's or use a tripod for the close up detail shots? I was getting a headache right off the bat trying to see the damage to the tire.

[@dave5833]

Anyone know how “hot” you get the paint

[@WiseUpRiseUp42]

I live in Phoenix how else can I contact him? I don’t have a Instagram

[@PaleHROse]

Took the cutoff wheel and cut all that shit off. Painted it inside and done

[@TheCarBro]

What’s his exhaust setup 😦

[@laintrain14]

Denzel Vlogs Stock headers, aftermarket test pipes, stock Y pipe, Tomei catback titanium muffler

[@leocaves1]

In my STi; it’s invidia Catless DP, tomei catback exhaust, Perrin elh headers.

[@doe8939]

Can you roll an already warped (from rust) fender?

[@gav240z]

Not well...

[@Filthy_Goblin_44]

wow. cool.

[@ryanscanlan9875]

Jesus loves turbos!

[@iimsloth820]

I want to buy one of these does anyone know the name or a Canadian distributor

[@brandonfairbanks5764]

Dude they are all over Amazon. Just look for fender lip roller. There are a shit load of decent knock offs.

[@DARKWoLF52297]

So you have this problem cuz your car is lowered?

[@jimebe602]

Its because it is lower, with wide wheels and meaty tires.

[@frankrizzo1239]

What was the offset on the white rims?

[@matthewmelson06]

I think It's either a +12 or a +15

[@gordonbyrd7199]

I wish I could post a pic of my tires

[@h-townfishing1382]

someone fill me in here plz. whats the main purpose of fender rolling?

[@jasonnguyen3259]

If you have larger wheels then your stock ones it can hit ur fenders destroying the tires and fenders. Now if you have a slammed set up which is when u lower your vehicle on coilovers,springs, bags etc if you have wide wheels or even run stock in general it could hit ur fenders ruining wheels which is why people fender roll their fenders to open up more space allowing cars to get more lower or to prevent fender damages when driving on bumpy roads. But get a professional to do these things because one mistake can lead to paint cracks

[@snowplowin5937]

If you watch the video they explain why and what

[@nazmcnasty]

What if I don’t care about my paint (it’s chipping BAD) do I still need heat?

[@seanmuehlhauser9612]

Anyone using the roller on a 8 lug truck?

[@anagi6656]

Do u live in pheniox az

[@Mike-ie7ip]

Didn’t even show what the rolled fender looked like, seriously?

[@miguelibanez6858]

Or just get a 20mm spacer with coil overs and a 32mm offset and you goodddd

[@mikeyg8133]

Miguel Ibañez fuck a spacer just get a wheel with the proper offset

[@miguelibanez6858]

Mikey Gio in some cases the spacer is a must to get your perfect finish.

[@LightingHemi57]

Don’t stretch your tires won’t scratch lol

[@NickH-zr4zr]

I know this guy. Yummmaaa

[@lukesanderson2297]

You must get that pretty damn hot if you're changing the malleability of the steel!

[@logancapolupo3154]

Luke Sanderson not the steel. The paint. It doesn't nothing for the sheet metal it's just making the paint pliable so you can roll with out cracking it

[@jimebe602]

#LeoFenderRolls