Honda Ruckus GY6 Engine install [Part 4] BUILD SERIES

[@kuyaevo5460]

thanks for uploading this kind of videos man your videos are really big help your big fan from the phillipines

[@donniefish6362]

That is turning out to be a very sweet ruckus I do like the brackets and the blinker you put on the back really nice looking bike can’t wait to your next video piece👍👍👍

[@RollingWrench]

Thanks again for the support 🙏 next episode is wiring 😛

[@mohicamotionless4445]

I love the series men, but like advice when you put the camera on the tripod you adjust the focus manually because the auto focus does strange things, which makes your head a little dizzy, and only uses the auto focus when you have the camera in your hand :D

[@RollingWrench]

Thanks for the tip, I’ll take that into consideration. I appreciate the support 🙏

[@KileyNewbold]

Is the current kit updated enough that there isn't grinding and dremmel etc required? Or still about the same?

[@anthonylawrencesnow]

Just curious as to why you wouldn't want to use the accelerator pump?

[@ericdoran4313]

From pictures I seen it shows the cvt hose connected to the valve cover breather hose? Is that correct or should I replicate what you've done?

[@orenchilson2079]

have you ever seen one with 2 beltsand a tork amp in it

[@konstantintasov7671]

Greetings from Bulgaria. I'm not a Rucus owner, but i like your videos a lot! Really you oil the air filters with WD-40? And it's work fine?

[@Geekinofflife]

i ordered the gy6 swap kit more or less piece by piece. i didnt see a bolt for the shock motor mount. do you use the stock one from the original motor or should there have been one with the kit?

[@christianrodelaonio3017]

Nice build owesome make me feel happy

[@RollingWrench]

😆 perfect 👌

[@eddiejohnson5540]

Can you run a sprocket off the rear hub for a four wheeler

[@Clasickoner]

I can’t seem to find Part 3 of this series?

[@imcoga]

Where can I get that engine mount stretch kit?????

[@phillipgreen-poisson7565]

Will any upgraded exhaust work with this kit?

[@RollingWrench]

No, it has to be for a wide tire

[@89vmaxx]

When will the motor mount be back in stock?

[@RollingWrench]

Never :-( they are out of biz! We have different styles though:-)

[@affishingadventure3991]

Kapan di Indonesia ada motor ini

[@henrytep3398]

What size were the nuts & bolts you used to mount that dwt wheel onto the hub?

[@originalgreek]

So can I use my two brothers exhaust with this kit?

[@Kahuna_550]

When will this kit be back in stock? Is there a wait list.

[@marvinesguerra8488]

Hi I have Honda ruckus but is not working the batery,fusesnd the two black thing I change hat everything but ruckus still not working the starter the signal light horn and the light and the front

[@jonwright1513]

Great video just bought a ruckus .:: maybe this is a dumb question but how do you know if you have the stock motor or it’s a y6 motor I got the bike and a box full of two motors ..

[@RollingWrench]

The stock motor will have radiator hoses. The GY6 will not

[@jonwright1513]

Rolling Wrench ok cool man thanks for the reply so fast just sub your channel yesterday I bindged a couple vids yesterday made my day .

[@bradcallander7789]

thanks you have just answered many questions for me great job

[@RollingWrench]

Thanks for the support

[@predparafina5537]

Hi from philippines what size a tire rear and tire front and mags front/rear!! Thank you so much

[@ericdoran4313]

Rear tires are usually 130/70 12 and front I run a 90/60 12 , 12 by 8 rear rim 12 by 4 front

[@mongoose0307]

Hey do you rent out equipment for tuning or do you only do tuning jobs hourly?

[@RollingWrench]

I don’t have any rental stuff at the moment. But that is a good idea 💡

[@bulentgenc8235]

Is there a quality crank brand that I will use with the compatible 61 mm piston for gy6?

[@401build]

Your a master in ruckus builds 🔥🔥

[@RollingWrench]

Thank you 🙏 it’s nice to have positive feedback. I appreciate the support!

[@Jake-fs3cx]

Can I use the stock engine mount for the gy6 swap?

[@RollingWrench]

No :-(

[@michaelwright9891]

Right on

[@michaelwright9891]

Does that mount work with my cheap Tao Tao ? I m doing a 150 swap and that is so tight!

[@RollingWrench]

No, unfortunately

[@jasperoneill6144]

Can you derestrict a 4 pin cdi on a Sinnis street

[@streetrossi7235]

Is that a single-sided swingarm if it is where did you get it from

[@RollingWrench]

The GY6 engine uses its engine case as a swing arm. It is single sided. Although there are some that are not. www.rollingwrenchdenver.com/products/gy6-150cc-long-case-engine-ruckus-metro-swap-motor

[@claudio67362]

Does anyone know for sure if you can replace a 1P157qmj cylinder head by a regular 157qmj head..There are differences in height..like 1.5 mm where the camshaft sits?Thanks

[@alexanderedades6531]

Alex Edades .shoutout maestroo...ive been watching your execellent gy6 stretch and all convertion job..perfect enough to start my own project budget gy6 bike..how can i get/buy a complete stretch gy6 kit..from you maestro.....is it possible to for me to order a complete strecth kit.....hoping you can help me maestroo...

[@RollingWrench]

Thanks for the support 🙏 Yes, we have the kit: www.rollingwrenchdenver.com/products/complete-honda-ruckus-gy6-swap-kit

[@daxecijan327]

How much

[@MattRiales]

Where the hell is part 3 of the GY6 swap/build?? I am planning to do this very soon and I'm trying to make sure i don't forget anything.

[@RollingWrench]

How to stretch a tire [Honda Ruckus GY6 swap] PART 3 kzbin.info/www/bejne/ZnjIZ5SepLxqZ5Y

[@ประสิทธิ์บุญมา-ต5ม]

อยากได้สักคันครับ

[@t-bone3657]

How much for you to do it all?

[@RollingWrench]

We don’t do customer work

[@roywalls5595]

Sorry i was late watching video Rolling Wrench!!

[@RollingWrench]

It’s all good, I’ll have plenty more vids coming soon 🤘🏻😛

[@deividejesustavarez3563]

Megusta ésa pasola

[@thusithanayanananda8205]

good

[@RollingWrench]

Thank you 🙏

[@friztjacobs3]

How much was this budget build?

[@RollingWrench]

Click the link in the description.

[@kennethbellmyer9241]

Nice placement...greasemonkey.,.

[@kennethbellmyer9241]

When you gonna figure out Ruckus's are dumb?...your better than that...bro bro.

[@enochlucky7315]

This lucky yu won firend I like work

[@harrywest8100]

On one of your other videos you was talking about the engine. This is the one I have is it a good one. I'm new to the scooter club. 157qmj*8a061515*.

[@RollingWrench]

Ya, that’s a a good one. GY6 150cc A motor

[@harrywest8100]

@@RollingWrench ok I was thinking about getting that spriket kit o your website. Would it work for me?

[@RollingWrench]

Gear up kit will work :-)

[@Luckypokemon1122]

hey bro need any part time help?

[@RollingWrench]

Not currently

[@roywalls5595]

I be doing same thing i going buy TKC it a clone honda ruckus upgrade engine to 150cc ! I be buying part from you Rolling Wrench!

[@RollingWrench]

Nice! I like the sound of that! I appreciate the support 🙏

[@daihuynh6820]

Gold

[@RollingWrench]

Thank you 🙏

[@maurovillagran3616]

Un saludo desde México

[@EbolaSquirrel]

Same

[@maurovillagran3616]

@@EbolaSquirrel en español por favor

[@YeKhine1986]

Gy6 engine and part. How much

[@RollingWrench]

The kit is $2299

[@kurtwan-uta1423]

เบียร์ช้าง

[@EbolaSquirrel]

same tbh

[@Dbdilly]

Sponsored by red locktight 😆

[@RollingWrench]

Lol True Story

[@dastinhofman2244]

👍👍👍👏👏👏

[@เสี่ยบินอิอิ]

คนไทยก้อมาว่ะ

[@the_middle_son90s7]

For full video your asking for money what a youtuber

[@RollingWrench]

It’s by biz brother. If you don’t want to support, just wait. They will be free.