Rollsizer Automatic Decapper (RAD) Initial Review and Testing 1 of 3

[@chgofirefighter]

Wouldn't be nice to have a combo rollsize/decapper machine~ That would be a reloader's dream!

[@williambotha5864]

Both machines have stoppages - the roll sizer with upside down feed, 380/9mm imbeds etc and the decapper with bad primer holes (Norma cases) and broken decapper pins ... so, to connect the two simply doubles your micro stops for BOTH processes, it's much better to put the two in series and have a single operator run both machines. We actually had two decappers set up on a mobile bench - alongside the rollsizer ... Rollsizer produce absolutely fantastic products, robust, easy to set up, clean and maintain ... we run about 50,000 a month through the machines and no major failures.

[@Soulman6969]

For sale?

[@firearmconvention946]

Can you use any decapping die you want or you have to use the roll sizer decapper with its replacement pins ?

[@williambotha5864]

It comes with a solo decapper that is easy to set up with the cam-drive ...

[@steelshrapnel9900]

What’s a sorter?

[@williambotha5864]

Look up GS machines, he sells a great, high volume sorter that separates all the calibers automatically into buckets, about a 5gal bucket every 5-10 minutes dependent on the dirt in the range ammo. We narrowed the gap between the rollers to make the separation between 9mm and .223 a little more controllable ... and wash the cases and trommeled the grit off them before they went to sorting...