Ronin Factory 50 Caliber Bullet Antenna

[@SnakeDoctor303]

What's the best tool to use to remove this antenna?

[@JPIMPS2477]

I bought the Ronin antenna 50 cal. for my 2019 Ford F-150 through Amazon and saw I got two screws in the small plastic bag given to me. I matched one of the screws to my factory antenna and used the proper one. When I looked at the photos on amazon (Ronin company picture) it showed the red paint of the screw at the bottom of the 50 cal. antenna; in which I later learned that was wrong. Now the red paint part of the screw is inside my antenna holder on my truck and the top part of the screw (yellow paint of screw) is where the 50 cal antenna is screwed to. I later learned that the red paint should be inside the 50 cal. antenna. Is there anyway I can flip the yellow tip with the red? The screw inside my antenna won’t move. Also, the antenna isn’t properly secured and any person can remove it by hand. Any suggestions to my situation?

[@Sithari66]

How does this hold up in a car wash?

[@RogerJG21]

You said it comes with Anti-Theft thread locking compound great let say I can't hear the radio because the antenna its just to small how will get it off?

[@RoninFactory]

Just thread it in about 1 turn or less to make a connection and test the signal. If the reception suffers too much where you live, then just unscrew without any harm done to the antenna.

[@taylorrussell2812]

Wicked! Putting mine on in the morning! Thanks for the video

[@findo999]

I have installed this antenna The reception is not the good

[@RoninFactory]

Hi, Since it is a shorter antenna, in some locations it will not pick up AM/FM radio as well as the longer whip antenna. Most people do not experience a loss, but it really depends on your location. You can always use Bluetooth, XM or aux input still.

[@rontaviussnipes3021]

Just FYI make sure you don’t install the wrong bolt. I’m stupid and didn’t read the bolt will not come out and I had to order a replacement