Morimoto XB Headlights Detailed Install | 2020+ Superduty

This is the most detailed, in depth installation video of the morimoto XB quad beam led headlights on a 2020+ Ford super duty.
XB Headlights
www.amazon.com/dp/B09CLTN8WN?...
Automatic wire stripper
amzn.to/3LtEMH2
Heat Shrink Butt Connectors w/ Solder
amzn.to/3xEuHl1
Check Out my amazon store for some of my favorite tools, gadgets and snowplowing accessories!
www.amazon.com/shop/snowplowlife
Contact Me:
[e-mail]
(Disclaimer) As an Amazon Associate, I earn a small commission from anything purchased in the amazon link(s) posted in this description. I use these funds to purchase new gear and reinvest into the channel. Thank you!

[@dewayneatwell7604]

REALLY a well done video and great installation! Glad I found this and look forward to seeing additional content from this channel. Thank you.

[@justinbeedle1034]

Great video. Love the detail

[@vtwinusa]

Good find on the brown wire. I’m installing XB hybrids in the next few days and there was no way I was going to make a hole in the fuse box or lid. I was planning to use an upfitter switch until I saw this video.

[@OldSoulMillennial]

Brown wire has worked flawlessly for me. No issues

[@superpeluso1]

Nice one on that wire you surely help all of us 😅. I’m getting those headlights for sure. I got a fifth wheel and my halogens made me nervous 😂👍🏻

[@OldSoulMillennial]

Nice 👍

[@jamierizzo1030]

Thank you for this video. I’m ordering my headlights right now if it wasn’t for you I would’ve never bought them. Thank you.

[@OldSoulMillennial]

Now if only I could get Morimoto to sponsor me!

[@CDeHeer97]

Without the stock Grey Connector Connected Does That Allow Fogs with Brights?

[@johndavidson9423]

I can confirm that my 2022 6.2L has the PTO supply wires bundled with the Upfitter wiring as in your video.

[@OldSoulMillennial]

Thank you for the confirmation. Im sure this will help someone out. Did you test for power when the truck ignition is on? By chance

[@johndavidson9423]

@@OldSoulMillennial Yes- tested at 14 volts when ignition is on. Proceeded with light install last weekend. Worked well. Thanks again for a great video. Now - let's see the video for adding / integrating Morimoto fog lamps!

[@Dcj01]

What type wire and did you solder?

[@scottlamadeleine2243]

I have these lights sitting in my shed for my 2020 and glad I watched this, I really didnt want to tap into my fuse box. Did you cut the fuse link off the wire they provided and then install your own fuse, I know you installed your own just wasnt sure if you cut theirs off

[@OldSoulMillennial]

Sorry, I don't recall. I think I may have left it in. That brown (pto wire) definitely has its own fuse somewhere. Your call on what you wanna do. Can't go wrong either way imo

[@milosusa]

I just installed them on my 2022 F 250, but with amber DRL , they are great in low beam, but not very impressed when running high beam no much difference from low beam . How are yours on high beam ?

[@OldSoulMillennial]

High beams have a very narrow throw. I can see strait ahead, but going around corners, leaves a lot to be desired. Low beams are 2 times brighter than the original halogen lights, but still could be a bit brighter.

[@jacqiekenj1197]

How did you wire the ground for the headlights or was that done for the lighted emblem?

[@OldSoulMillennial]

Ground is only needed for the emblem.

[@ToMang07]

Well, I was debating returning these lights because of that BJB fuse bullshit. I'll check to see if the Upfitter wire bundle on my 22 has the PTO wire as a KO source.... if it does you just saved my ass a lot of stress and time! Thanks!

[@OldSoulMillennial]

I was in the same boat, didn't want to cut the fuse box or install a half ass fuse tap. Brown pto wire is KEY

[@CDeHeer97]

Saved them a return on this end as well! @@OldSoulMillennial

[@g-man2228]

How are they doing, any issues since installing? Just ordered the Hybrids!

[@OldSoulMillennial]

No Issues! No Regrets!

[@thatguy5915]

How’s the brown wire working for the DRLs? I just got these and I’m going to try going that same route

[@OldSoulMillennial]

Perfect. Everything is working flawlessly.

[@thatguy5915]

@@OldSoulMillennial that’s good to hear. I just hooked mine up like that a few days ago and it’s working great so far

[@johndavidson9423]

@@OldSoulMillennial What size in-line wire did you use to hook up the brown wire? Thanks

[@Dcj01]

@@johndavidson9423yea what he said lol

[@jorgeramos1105]

I need help doing the install from upfitter box can you make another video explaining out you did the install

[@jorgeramos1105]

Which wire did you use under the upfitter relay I have a 2022 F-250

[@OldSoulMillennial]

Look at your up fitter wire harness under the hood. There is a label attached to the wires explaining which wire corresponds to which switch.

[@jorgeramos1105]

What wire gauge did you use and did you add a 10 amp fuse for the headlight and another for the putco emblem

[@OldSoulMillennial]

@@jorgeramos1105 I don't believe I added a fuse, as that brown pto wire is already fused. I don't recall what gauge I used. I would say that you should be safe with 12 gauge. Make sure you use pure copper stranded wire. Avoid Copper clad aluminum.

[@Wittswelding]

Need some strobes for the new truck

[@OldSoulMillennial]

Definitely, if I every decide to add a plow.

[@josehuertainsb]

The plastic grill is a little heavy😅😅😅😅😅😅😅😅

[@SeaDooEric]

$1750......uh no thanks

[@donearl6675]