Rough Drain Pipe Plumbing For Two Story House - Design And Fitting Assembly Examples Part 3

[@chadrobinson3504]

It would be great to see a follow-up on ganging the vents before they go through the roof. With so much solar going on roofs these days, and the time and cost of even simple fittings like roof vents/flashing, I'm having trouble wrapping my head around why so many homes still have so many roof penetrations just for vents, especially when they're very close together.

[@MrMac5150]

Good One thumbs up.

[@gregvancom]

Thanks for liking

[@claytonkeeney8911]

How do you typicaly trim those exterior cleanouts in the siding?

[@gregvancom]

With a round hole, maybe about 1/8 of an inch larger and then fill gap around clean out with an approved sealant or caulking.

[@marjanoviccc]

Niceee! Very smart! Take care

[@gregvancom]

Thank you, I will

[@ahiyahysrayl3007]

I like that your videos are so intuitive!

[@gregvancom]

I appreciate that!

[@BradSchafer-k2k]

Great Videos! I will two levels with 2 bathrooms in my cabin as well as laundry and one kitchen sink. With all 8 fixtures being separate 1.5 inch dry vents, can I combine into one vent for going through the roof, and if so, should this roof vent be 2 or 3 inch? I am in cold northern Minnesota

[@jimclark7185]

Great Video Can I get a list of items used in here with the name of details information on the pipe fittings

[@realkbts]

Let’s say kitchen sink with a laundry room right above it on the second floor, can the wash drain go down to the sink drain, with the vent going to the roof solely from the wash drain? Or do they need separate vents?

[@jorgenorman8715]

⁠ so if I have a two story townhouse and the 2nd floor bathroom is wet vented through a 4in stack, can I add a 1st floor washing machine standpipe to that same 4in stack? I was planing on buying a 4x4x2in Tee and add P trap and the standpipe.

[@bethanyanderson1745]

Why couldn't the bay house both the bathtub/shower combo valve and the vent? Too many holes in the bottom plate? Not necessary to provide details on the pipe fittings again. However, it would have been great if you'd listed the link to that video in your description.

[@erasmusosei4229]

Nice

[@gregvancom]

Thanks

[@dukati3499]

Name it please

[@MrMac5150]

The 4in clean out with pitch angel 38 bucks Home Depot found expensive.

[@gregvancom]

That's probably going to be a good price in a few years when they are 748 dollars:)

[@claytonkeeney8911]

1st

[@gregvancom]

And winner is, YOU!!!

[@MrRoss2003]

Sorry. Fat fingers. I really like your videos. I would like to see the pipe dimensions. Thanks.