RPM Built ZR1 on the Streets of Mexico | RPM S4 E34

[@jplperformance9073]

My favorite/DREAM CAR of all the RPM cars I've seen on this channel. This car right bf Fran sold it was is my favorite of all!!!!!!

[@donls1sscme]

It's for sale in houston

[@TheRealDarthVadar]

We need a RPM vs LMR race 😂 my money is on RPM 💪

[@huckilt]

Hahaha I loved the Mexico boarder crossing clip!!! That was top notch editing work. I love you guys keep up the killer work:)

[@johnlukach4091]

Its so refreshing to see someone that can drive a stick like that! No driver mod complaints lol

[@GHOSTJERKER]

Super impressed with Fran's no lift 2-3 shift in the ZR1. I haven't mastered the 2-3 shift in my stock 09 ZR1 smh, I miss 3rd sometimes.

[@bjcock9786]

BITCH U NEVER HAD A ZR1 STOP THE FLEX

[@michaelsites1498]

That’s cute.... I remember my first time shifting 2-3.... 😉

[@iLLinFiniTiG35]

It's honestly just as fast as my lifting. That was in a bolton cam ls3 car though. I could kill no lift shifts significantly quicker than that lol.

[@Q_IXIX]

Not gonna lie I used to try it my wife's cruze

[@eddielee4421]

I like that Fran "opened up" with what he drives and what's in it.

[@TheFi1thyCasual]

Those sounds from that ZR1 are wicked.

[@proracer6922]

Mother of GOD, when you pass that car at 15:07

[@billd722]

Wow, badass pulls. Very impressed by frans shifts! Love the clip of "entering Mexico" lol

[@paulhewett303]

Awesome work guys. Unreal ZR1. My man Fran, you rock brother, big fan of yours down here in Florida. 2013 Z06 LS7 owner.

[@RaceProvenMotorsports]

Thanks man

[@DTBLS1]

Nice vid! Fran’s ZR1 is the perfect street car imo.

[@ztwntyn8]

Since I don’t have a cam installation tool I bolted the timing chain gear on the cam and that helps control the cam a lot for that last bearing or two.

[@juliusrowe9374]

Fran's ZR1 is sick! I'm loving his setup!

[@scadieee]

Been waiting on Fran’s car coverage for the longeeeeeeeest. Next we need his red vette, truck & whatever toys he has

[@markwh668]

Fran’s Z is smokin! Top notch video.

[@idenalgiburi6639]

These videos keep getting better and better

[@leafywatson249]

Me&wifey will call this vlog a lovely family moment yes we will guys

[@TeddyWestside412]

I love the phone in the cup holder how it flies back during the pull then goes back to the front when he lets off.

[@jpman9795]

Lovin the no-lift shifting. Definitely OG!

[@robertcarper5572]

Bad ass ZR1! What tires do you have on it? Looking to buy a sticky tire for the street for 800+ rwhp.

[@midnightc6664]

I love how his phone shot forward in the cup holder after he left off the gas 😂

[@killbilly069]

Love the music selections, so tired of the elevator crap everyone else uses

[@almostthereone]

I don’t know if I missed it, but is this still on the stock ZR1 mufflers? I have the LG 1 7/8 headers and cat less mid section into the B&B Fusion on my HCI C6Z, and even with the valves closed it’s crazy loud. Would love to run this same exhaust setup. Thanks is advance!

[@jonesy0619]

frans the man showing big guys can bang them gears

[@madeinatlanta--3]

Cant wait for the call out..

[@carllarsen2769]

What's with the rear wheels during the dyno pulls?

[@leecwilkin]

what happens to all the parts you change? heads cams ect?

[@9frankg]

The blower wine is really nice on the zr1. Dam

[@tonyfranco516]

Best intro yet! Those shifts sound like Paul Walker and his eclipse at dodgers stadium

[@smokinace8977]

We have GOT to have more rides or ride alongs. Some Mexican street action only adds to the experience

[@joejoecamel9106]

Sweet rides guys! Keep going BIG! Life goes Fast Drive FASTER!!

[@hallwayz1]

Nice vid. See you guys at the callout.

[@thegonz7833]

All around GREAT video !

[@downsouthtv4616]

How does your stage 3 heads/cam c6z respond to boost? And how much boost is too much for the 7.0s

[@brettrobinson1430]

Is the no lift shift something that the car is setup to do or was he just doing that to try it. Sorry hope that makes sense

[@HighlightReel15]

How long does it take Eric or Tyler to install a cam and all it’s goodies? Springs etc.

[@MattParkerStayTuned]

That was a very nice road trip to Mexico lol. Got some good results just from cams, ported blower, custom headers boosted motor that car hulls on the streets of Mexico 🇲🇽💯🔥 I enjoy watching your videos guys keep up the good work keep them coming.

[@robertwilbert1317]

The mexico boarder clip was funny as hell...awesome vid...

[@Resistolitin]

What do you guys use to wrap the front end of the cars while working on them?

[@jpprind]

Fran's ZR-1 hauls ass. Always like the C6 body style. Then again the C7Z is nothing but amazing too! Keep the awesome content coming. These videos have me drooling to buy some American horsepower. Looks like the most fun you can have with your clothes on.

[@dirtydracing4254]

Dam that Zr1 puts in work ! Man that thing is a beast. So now its time for fran to build a 440 cid short block then throw on that ls9 top end . Then you will be 120p-1300 rwhp . And that would be bad ass.

[@snoopergnar3719]

StreetSpeed717 never made me want a Corvette, but finding this channel through him did.

[@samsalman8344]

Bro what's the maximum Coolant temperature your corvette reaches in a hot day? I have corvette C6 2006 LS2 Stock with only filter and Z06 mufflers My temperature reaches 225F - 235F when the AC is on and when I switch the AC off it comes down all the way to 210-215F is it normal?

[@adams733]

I hate when it gets crowded in Mexico. Awesome work guys.

[@aarongentile7232]

what kind of air intake is that? doesn't look like a varararum (sp?) one to me but def. looks cool!! also, what's cost on the one u have & HP increase expected from one?. thanks.

[@RaceProvenMotorsports]

custom we say all the mods in the video

[@aarongentile7232]

Thanks for the response and sorry, I asked as soon as I saw it, now that I'm watching the rest of it I just heard it's a custom intake .. it looks really FN cool! ..did u @ RPM make it?

[@RaceProvenMotorsports]

AJ Gentile yes it was made in house

[@thekylewaters]

Great episode. Love Frans zr1

[@vincelindataylor4168]

That was a badass 2-3 shift ok really that was a badass 1-2-3 shift.

[@Fwp71]

Lol it wouldn’t be a shop if there was no ball busting going on . I work for Cummins . Nice to see other engine techs just as organized . Looking forward to my 5th gen coming here

[@air4ce96]

“Is this really turning you on Steve? You’re really looking at me funny” LOL

[@wadenator420]

Whats up with the rear wheel wobble on the dyno? Is that because of the geometry because its so low?

[@Bsaint]

wadenator420 they mentioned it in the comments the tire just needs to be balanced

[@That1Fox]

Man I love this channel.

[@DJA1599]

Didn’t know Fran was such a baller at grabbing gears! Fuck yeah. Love the vids! Mike sent me, but this has quickly become one of my favorite channels.

[@Z06-viper]

Man Fran can shift!!

[@wearethetraffic]

Love the flames, Fran rows those gears... He does more than just tune cars and be sexy LOL!

[@petercarey9771]

Another enjoyable vid. Appreciate the summary of what's been done to Fran's ZR1. Is it possible a "For Sale" might be put up on it in the future? If not, any more mods planned? Save the Wave.

[@RaceProvenMotorsports]

Everything is for sale :)

[@petercarey9771]

lol, spoken like a true salesman.

[@jsmith1210]

Hello Fran, what's the pulley set-up on your ZR1?

[@BentlyBo4]

That no lift shift is too cool.

[@LuisLopez-lr7ub]

hey brother where are u guys located? and what's ballpark rang to stage II LS engines

[@vt2704]

I know it's not the best of idea's but rolling with papa Fran today was 😎

[@venomws6]

Another Great episode keep'em coming guys . What cooling mods does Fran have in his ZR1? Heat Exchanger? Bigger Expansion tank?

[@RaceProvenMotorsports]

Edelbrock HX, Ice tank In back and LPE pump

[@CMurda85Z28]

is Fran still running the stock bottom end on his ZR1? with the nitrous?

[@CMurda85Z28]

and what intake is that???

[@RaceProvenMotorsports]

Yes it’s stock bottom end. We custom made the air intake

[@oscarmurillo8472]

Why does the zr1 shoot flames exactly? I’ve heard if it does. The car is running to rich or something Is this always true? Jst wondering

[@oldbuddyben]

Does Fran have stock suspension on this car? (I'm going to do some Googling after this as well).

[@RaceProvenMotorsports]

Yes bone stock

[@texastrill5473]

After seeing what the Blowers in ZR1s can push out ported it really intrigues me what a 4.0 Whipple would make vs my F1X. I think I still prefer a Centrifugal. The car just seems to not like too much torque down low.

[@2muchBoost_]

What tires are used to handle 900hp in the ZR1?

[@turbot609]

Phone in the cup holder really felt those pulls

[@taxi615]

Fran shifts like a beast!!!

[@richs.7385]

That's some damn good shifting!

[@stevencurry4637]

@917 WHP & 872 Tq how much boost were you guys running on Fran's ZR1?

[@RaceProvenMotorsports]

19 psi or so on that setup

[@stevencurry4637]

@@RaceProvenMotorsports That's awesome! Love your channel! You guys are hilarious! Was the lower end all stock? What do you think caused the LS9 failure?

[@transam2002ws6]

Fran's car is nasty. Fran had driver mod engaged during that 40pull no lift shift. When he raised the Cadillac was he no lift shifting as well? Awesome video.

[@RaceProvenMotorsports]

I didn’t on the 2-3 but did on the 3-4

[@MikeMinervini]

is the exhaust in the video the stock zr1 exhaust with the dual mode?

[@RaceProvenMotorsports]

Yes

[@Nate_H.]

That CTS-V is bad ass.

[@tommyfromtheprojectsthemid9173]

I have a 2017 C7 Z06, would love to mod it, but afraid of voiding the warranty. What mods can be done that will increase speed, but NOT void warranty. I live near the 717 crew so not far away.

[@RaceProvenMotorsports]

Not a ton can be done. Exhaust, intake. GM also has to PROVE that any mods you did caused whatever to fail. But very rarely do these cars has issues with light mods

[@chrismelnik4072]

Best episode really enjoyed!!

[@backyardchevy328]

Doing heads on a zr1 as we speak...awesome car u got there👍

[@NsNationHQ]

no copyright issues with the music? sweet video!!

[@IMBruceECLECTIC]

ZR1 Looks Good

[@georgem.6136]

Frans ZR1 Rips, i cannot wait for warmer track day videos. Joeys V kept it close, Nick is in Trouble! Fran, do you know what series your racing this year? Must be nice having Mexico just down the street so you can test!

[@Teramydog]

This video is so awesome!!

[@thinbluelinemustang372]

Yeah the Mexico border clip was priceless!

[@5469supra]

Looks like Steve needs to get off the bmw ride and move into a Corvette. This is a sign that Fran is trying to give you Steve! Lol Awesome videos. Keep up the work on these badass videos.

[@yuniordopico7040]

Beautiful sound

[@_J_U_S_T_I_N_]

Those wheels on Frans ZR1 are fucking sick

[@xoi7803]

Why does Fran's wheel wobble so much on the dyno?

[@ryancottom6633]

What tires are on Fans car?

[@shawnmichael8801]

What tune is that, that starts at 3:15?

[@charlesbeans2398]

Was it just me or that rear driver side wheel on the white zr1 sorta spinning wierd?

[@davearmstrong5226]

something weird!! seen it to.

[@TopGunn700]

Saw that too

[@alexandernerito]

Thought I was the only one noticing that

[@RaceProvenMotorsports]

Charles Beans it's the tire, just needs to be balanced not a big deal.

[@charlesbeans2398]

RaceProvenMotorsports ah...good thing it's not a bent rim

[@seanclancey5284]

Awesome editing on the video one of your best tell Fran, to stop the texting while driving lol.

[@noahsandoval1390]

GREAT MUSIC!!! And great vid

[@speedchannel1778]

Danm That guy can drive, it’s probably mostly the car!

[@jasonjames513]

Been waiting on a video on the ZR1, so nasty!

[@clintmiller88]

God damn slamming dem gearssss

[@That_Corvette_Guy]

Another entertaining video 😎🤘. Liked the driving Q&A

[@Amateur-Driver]

Very nice video. I place this one up close to the top of some of your best work. But I’m very bias when I see racing down in Mexico 😁

[@built2jzlexus496]

What does Fran's ZR1 trap off spray?

[@built2jzlexus496]

WAIT!!!! 151-153 BOOST ONLY???

[@ITHINKYOULOST]

Pretty certain I saw you guys heading S/B while I was working in "Guadalajara-mont" yesterday lol

[@RustyZipper]

1:07 are those considered “Bolt ons” ?

[@ke0kie]

Mom: What are you watching talking about E and Meth?! Son: OMG Mom, it's just car stuff, gaaaaaaaaaaaw

[@bryanm6085]

BEAUTIFUL CAR!!!

[@josephalvarado7265]

Whts wrong with the wheels are the rear wheels bent look crazy under power