RR RACING CARBON FIBER INTAKE AND HEAT SHIELD INSTALL

[@NewShockerGuy]

Love how the intake tube looks, hate that they didn't integrate the two breather hoses into the intake tube. I dislike the separate hoses/filter. Probably going to go with the Tom's intake tube. Even though it's just for looks. Intake tubes on our cars don't do anything. But they are definitely much nicer looking than the plastic factory one.

[@BulletsGarage]

Yes toms is the one u would get if I did it again

[@hds8182]

The heat shield is an extreme pain in the ass to install. Holy shit

[@ljc1821]

When u mounted the horn on the other location, did u have to go underneath the car to add the bolt to fasten the horn or was it fastened from above just fine?

[@bwshort]

The carbon fiber looks like it belongs in the engine compartment. The smooth intake tube should allow for a little less suction resistance. Nice mod.

[@BulletsGarage]

Yea it fits in the engine bay real nice. Ur right it should have a little less air turbulence

[@bwshort]

4 week wait? Going on 4 months waiting on Tom’s. Gonna grab that heat shield though. Just saw it’s sold separately.

[@BulletsGarage]

Yup it’s sold separate

[@mrmica5.0]

Like the video bro but why didn't u show the install of the breather?

[@BulletsGarage]

I did in a earlier video

[@karambir87]

Vent tube for the valve covers. where did you buy that? Did you made a video for it?

[@BulletsGarage]

Rr racing yea I have a video it’s under installing k&n intake

[@karambir87]

@@BulletsGarage thanks Man! So basically I don't need air/oil separator if I install this or that is a separate line?

[@BulletsGarage]

That’s a separate line

[@The_Unsuitable]

Did the intake elbow and breather kit cause issues? On later videos the catch can and heat shield are installed but the elbow is replaced with the stock one.

[@BulletsGarage]

No issues. I just sold the elbow

[@BulliKid]

Didn’t u say u don’t want to void warentee?

[@BulletsGarage]

Don’t worry my service advisor is cool so she has my back covered. Not worried about that

[@luismendez0755]

Where did the 2 rubber lines go that are suppose to go on the intake tube? I know the RR Racing tune doesn’t have them, what do you do with them?

[@BulletsGarage]

Luis Mendez they get eliminated with the hoses that come with the kit

[@eddiegomez2115]

Love your car man! Will you ever do a video of all the mods you've put on it?

[@BulletsGarage]

Like an over view of all the mods ? I pro can do one.

[@eddiegomez2115]

Yeah! I’m thinking of getting one soon and want to get do all the mods you’ve done

[@BulletsGarage]

Well till I put the video out u can watch all my previous videos. I filmed everything I did to the car.

[@eddiegomez2115]

Will do!

[@cheist2230]

What happens to the valve covers vents? Do they just sit there or do you connect them w something

[@BulletsGarage]

They are fed to filter in back

[@djfrakis]

So noob question, what was the size of the hose you got to reroute the intake flapper, so it wouldn’t pinch?

[@BulletsGarage]

Not sure it came with the intake

[@bojangifier]

What benefit does it give besides looks?

[@BulletsGarage]

None

[@julianski09]

You still have the ctek connected to your battery?

[@BulletsGarage]

When the weather is bad and I know I’m not gonna drive the car for a few days yes I put it on cuz battery is 3 years old already and ppl have had their battery die out of no where

[@1276388]

Didn’t get the PCV hoses part... where it’s connected now?

[@BulletsGarage]

It’s vented into atmosphere

[@1276388]

Bullets Garage won’t it give a check engine light?

[@BulletsGarage]

No sir

[@simmyyin8040]

Hey brother. What do you think about "Tom's Racing" parts straight from Japan? I heard it was a great product. There's a few ppl on YT (one owns a LC500 and the other I think owns both lol LC500 and RC F). One guy I think it's called, "Diego GS F Tom's racing Mods". What do you think of Tom's Full Titanium exhaust system, Carbon suction pipe kit, Brake line (made of Telfon and stainless steel mesh), the Racing brake pads, Air filter Super Ram II, Racing suspension, Suspension member reinforce brace front/rear. Lol That total set-up is around $13,891 USD excluding labor unless you can do it yourself. I'm in the process of opening my business 1st qtr of next yr. If it goes well, I'm shooting for a LC 500 or RC F. Love your vids bro. Keep it up 👌👍✊

[@BulletsGarage]

Hey simmy yin. Yea I know Diego he is a buddy of mine. He has a beautiful toms gsf. Toms is an amazing high quality brand for Lexus. You cannot go wrong choosing toms. I definitely recommend them if you have the money for it.

[@simmyyin8040]

@@BulletsGarage Lol nice! It's a small world. I want the GS F because of yours and Diego, but my heart is set on the Coupes. Haha Keep posting more mods or anything new on your ride bro! 👍

[@BulletsGarage]

LC is nice but it’s heavy

[@simmyyin8040]

@@BulletsGarage I know. But, the damn sleek exterior and interior design gets me. Haha Well see though, hopefully within a year or 2, I'll be apart of the F Club family.

[@BulletsGarage]

Ok sounds good man. By then the LCF should be out that’s gonna be a good car

[@juanhuerta8596]

Who has installed one of these systems that lives in California. Will the inspector make a huge stink about it?

[@BulletsGarage]

Idk. Cali laws r crazy

[@juanhuerta8596]

Tell me about it, I've been doing alot of research and it doesn't say anything about it. I even sent an email to RR racing and said has nothing to do with the smog.

[@kad151]

Carbon fiber look dope👍Did you feel any difference in torque and horsepower increased?

[@BulletsGarage]

No different. Intake won't give any improvement

[@kishannn10]

@@BulletsGarage supposed to give 11-15 hp no?

[@AyeeKoolaidGaming]

@@kishannn10 I think you need to use the rr racing tune after getting the carbon fiber intake.

[@BulletsGarage]

No u don’t

[@AyeeKoolaidGaming]

@@BulletsGarage then what’s the point of getting this intake ? And doesn’t the intake work better with the rr racing tune?

[@TobajzzHD]

how much hp gain will this make?

[@BulletsGarage]

Inatake. None really

[@TobajzzHD]

@@BulletsGarage oh okay, what's the best way to gain hp on these without spending too much?

[@BulletsGarage]

Headers and exhaust

[@QuanTran-vv6mf]

Does it sound louder?

[@BulletsGarage]

Not really sounds the same

[@ClazzioCovers]

+100 hp

[@BulletsGarage]

Huhhh lol