RSV4 | Stock Horsepower Baseline | Warranty Claim While On The Dyno

I took my brand new 2022 RSV4 1100 to the dyno to get the baseline numbers before I modify it with the SC Project GP22, Gabros Velocity Stacks and Upmap with Sprint Air Filter.
Unfortunately, a warranty claim arose during the dyno pulls. Stay tuned for an update.
Like & Subscribe for more videos

[@TheChaz81]

What I have seen from Vic Moto is he's a stand up dude! Definitely knows Aprilia and will help anyone!

[@ALFAVITAGA]

💯👌They took care of it in no time!

[@TheChaz81]

@@ALFAVITAGA that's sweet dude! I live in NM and never met him in person but he's helped me plenty with every Aprilia question I've asked him on KZbin! He usually has an answer!

[@ALFAVITAGA]

@@TheChaz81 Victor is great with answering questions and helping people out. Its because of his advice that I ended up in the Aprilia world.

[@TheChaz81]

@@ALFAVITAGA I went looking for another R1 and ended up with my Aprilia! Awesome bike! Check out the Tappezzeria seat covers with memory foam and let me know what you think! They are Sexy!

[@CreateYourWorth]

Great update. Thanks for this. I hope for a speedy fix. I hope you also document it. Cheers. 🎉 just saw the ending. Great it's fixed!

[@ALFAVITAGA]

Yup! Picking up the bike in a couple of hours and start modding it ✌️

[@benoitbuisson2593]

Hello, trop hâte de voir les prochaines vidéos...pour le bouchon Spider je te conseille de mettre des vis noires ça fait mieux..je l'ai fait sur mon RS660 c'est top full black.

[@ALFAVITAGA]

They’re coming up! I thought of changing the screws to black on my RS660. But on my RSV4 they may match the silver tank. I’ll use the silver screws first and then I may change them. ✌️

[@Sick6sixty_kev]

Been following since the beginning of the 660 mods and you were a big decision on me using the UpMap for the full SC project so I thank you for that but I was curious since you actually have a dyno available near you wouldn’t the better option just to have them do a full ECU flash/ dyno tune over the Up Map option ?

[@ALFAVITAGA]

Ideally a custom tune on the dyno will always outperform a “canned” tune. It’s not the Upmap Im vouching for, its Gabros maps. If Gabro was not offering maps in the Upmap I wouldn’t have chosen the Upmap. Its Gabros maps that I prefer. And of course the ease of use of being able to switch maps anytime I need, with a push of a button on my phones app. Its also a matter of cost. Gabros velocity stacks, air filter and Upmap cost me exactly what I would have paid for a custom tune on the dyno. Which means if I had chosen to go with a custom tune, I would have also paid for the stacks and air filter above the cost of the dyno tune. And I would basically be locked to that tune. Whereas with the Upmap I can revert to stock map or any other map anytime I want with zero cost. Another benefit of the Upmap is that if you do chose to dyno the bike, you can send the graph to Gabro and he can adjust the map to your bike with a small fee. Now don’t get me wrong. By definition, the proper way to tune your bike is on the dyno with a custom map. There is no doubt about that. But the difference in performance from the custom duno tune to Gabros map is so negligible that the extra cost might not be worth it if you are not racing. With that said, maybe one day I will do a custom dyno tune and compare the two. ✌️

[@Sick6sixty_kev]

@@ALFAVITAGA answered every question I had , thanks brother !

[@ALFAVITAGA]

😁👌

[@nasti_rsv4]

Please listen to me! I had this problem.. your injectors are hooked up backwards on cylinders 3 and 4

[@nasti_rsv4]

Please look at the cylinders 3 and 4 injectors.. they are hooked up in reverse. Come talk to me

[@ALFAVITAGA]

Yes that was exactly the problem. I go over it at 14:30 The injector connections where connected backwards.

[@oliverruffalo1058]

Where do the plugs go correctly?

[@Bisse_Elison]

Great video !

[@ALFAVITAGA]

@@Bisse_Elison Thank you! ✌️

[@gixxis3264]

Aprilia really needs a takeover , The Quality control is awful. I heard about this years ago & you upload this video 3 months ago & confirm its still an issue 😩 They need a takeover from a German Autogroup like Ducati had. solely for QQ

[@ALFAVITAGA]

It is very weird that the fuel injector connections did not pass QC. It was fixed though and love the bike. ✌️

[@motochiptuning]

Its not at the wheel! Dynojet numbers = normal other dyno is to ENGine all dynojet whp is fake

[@ALFAVITAGA]

I’m pretty sure its at the wheel and real lol ✌️

[@motochiptuning]

@ALFAVITAGA i can assure u its not :) dynojet numbers is costumers joy to make costumer sattisfied. Real world numbers is diferent and tested multiply times. Same bikes diferent dyno Where dynojet show fake wheel on other dynos more accute show same numbers to the crank.

[@ALFAVITAGA]

@motochiptuning I’m not an expert on dynos, but what I do know is that numbers don’t really mean much. It’s the baseline number as reference to the tuned number that matters, just to monitor the increase in power.

[@hoslyr86bass]

Think im having the same problem took mine today for its first ride dropped power at 7500rpm and after to many attempts the engine light came on. Do you remember which way the pugs should go i will pull my tank off and change them haha. I have race mapping and akroprovic so i pulled my servo out and charcoal canister aswel but i dont think thats my issue aye?

[@ALFAVITAGA]

I show the correct orientation in this video: kzbin.info/www/bejne/baKyq2ONlpijr9Esi=f1V9ij4Mz3Eqb2sY But to save you time it goes like this: Top Right: Grey, Bottom Right: Green, Top Left: Orange, Bottom Left: Black

[@pantag2]

Oi Italoi ksanaxtipisane. O Giovanni den eipie to espressaki tou to proi pou to esteine. For the upgrades... Eisai kai esy omos..amesos na to ftiakseis. Katse na to xareis ligo prota... ;-)

[@ALFAVITAGA]

Klassikoi Italoi 😂 E den ginete emeis oi Ellines na afisoume tipota apeiraxto 😛

[@ANSWERTHECALLOFJESUSCHRIST]

From what I've gathered reading and watching testimonials throughout the years, it seems that where they build those Aprilia bikes, everyday is a Friday. What a lottery it is with that brand! The inconsistency and surprise potential is insane.

[@jays_review]

I was wondering when the update on the bike was coming. I'm still waiting for my speed white to get delivered to my dealership

[@ALFAVITAGA]

Yes, time for some modding. Congrats on your speed white! ✌️

[@jays_review]

@@ALFAVITAGA thank you. I just need to find an exhaust that I want for it. That gp-22 is too loud for me

[@ALFAVITAGA]

@@jays_review I will post an honest review on the GP22. I’m scared it might become a bit overwhelmingly loud. But for me its definitely the most beautiful. Second option would be the SC1-R.

[@jays_review]

@@ALFAVITAGA i still have some time on picking out an exhaust. i might even just wait until next year to get one.

[@Attilla105]

Unfortunately, gabro is of no use, especially mtorque completely killed the engine. on sc gp22 velocity sprint air filter

[@Attilla105]

+upmap

[@ALFAVITAGA]

@@Attilla105 What happened to your engine?

[@Attilla105]

@@ALFAVITAGA I'm sending you the dyno measurements

[@sideshowbob939]

Hey yo, have the same bike. Also did an gabro up map but no stacks, just an dna airfilter. Arrow Exhaust, no kat and db killer, result is amazing. Waitin for your dyno numbers. Personal, i think the short sc's are too loud and it looks on the bike a little bit lost, also belive that these short mufflers will steal power from the engine without an map, because of the small volumen. With the upmap i think the dyno numbers are around 195 at the wheel👍

[@ALFAVITAGA]

Short exhausts are known to strip power away. But Ill dyno the bike soon and find out how it did.

[@Shadow0fd3ath24]

Got all that carbon cover crap to make make people think its light, yet youre just making it heavier...plus useless bars and triple clamp that are heavier than factory and just money pits lol

[@ALFAVITAGA]

The purpose of the carbon covers is not to make people think it’s light. It is to protect the frame from damage in the event of a crash. A small scratch on the frame, in the eyes of the insurance, can translate to a total loss of the bike. A total loss of a bike is covered based on the market value of the bike. In other words, an underpaid coverage. The reason for choosing carbon over plastic covers is because carbon is more resilient to damage. A plus is also that it makes the bike look even better. Not to mention that the weight added from the carbon covers is measured in ounces. All four carbon pieces can be held using your pinky finger. Therefore it’s considered a negligible weight addition. The useless bars offer an extended reach on the handle bars that make counter steering easier in the turns. Plus in the event of a crash the aftermarket clip ons have better replacement availability compared to stock. They are also easier and faster to replace. Not to mention that they have better compatibility with brake lever guards that are required on certain tracks. The triple may or may not be heavier but the point of replacing the triple is not reducing weight. Being billet aluminum and not cast aluminum makes it stronger while being more resilient to metal fluctuation. That helps in handling during extreme braking forces in turns. And it also look better than stock. Now regarding all this being a money pit..well.. it’s a good thing I have a lot of money to waste ✌️