RSX Ktuner 2 Step Antilag with Flames

Tuning by Nick
Toronto, Ontario, Canada
[e-mail]
@tuningbynick
2006 Acura RSX Type S
2006 Acura TSX K24A2 Engine Swap
How to setup Ktuner Step Antilag with flames

[@Silentjustin06]

I did this to my base rsx. I have it set at 100 fuel and -10 ignition @ 4,000 rpm. Its mild but still sounds better than basic 2 step. I feel pretty safe at this settings and rarely 2 step anyway. I only do it for my nephew and kids that like my car.

[@7ThrillFishing]

Only reason why I want to do it cause of my nephews haha they always ask about my rsx-s that I’m building. Would be cool to see their reaction

[@rileytodd4050]

Automatic?

[@Silentjustin06]

@@rileytodd4050 you can probably do it for automatic also.

[@Rsxbeto]

@@Silentjustin06 i have it done on my automatic

[@Silentjustin06]

@@Rsxbeto oh ok, yeah as long as you have ktuner or kpro it shouldn't matter if it's stick or automatic. Do you shift gears in M-D or just leave it in reagular automatic drive?

[@edwardortiz7707]

hey nick how can I go about getting flames from my 9th Gen Civic Si? Im running K Tuner and I do know how to adjust my L & H settings I was running -15 and the pops were great but I want to pop flames at a stand still

[@tuningbynick]

Unfortunately i dont think thats possible to do on a 9th gen with Ktuner

[@kiki022189]

Where are you located?

[@tuningbynick]

Im in Toronto, Canada

[@pedropadilla7120]

how much for you to email me a 2 step tune ?

[@tuningbynick]

I do offer remote support - Its best to email me and we can discuss options - [e-mail]

[@MrSaggywaffles]

What’s your email ? I’m looking for a etune

[@tuningbynick]

Freddie Catalan - My email is. [e-mail]

[@WMautoservice]

Can you make rolling 2-step with ktuner end user on rsx?

[@chelek20godoy93]

The next video will be. how to make tuning or 2step with hondata flashpro 😁 right nick?

[@tuningbynick]

Yessir - I have a Flashpro car lined up for 2 step video in about 2-3 weeks, stay tuned!

[@ALXBurnett]

@@tuningbynick When can we have it? :D

[@DepthSeek]

@@ALXBurnett never

[@chief470]

Hey man I did everything and went back to my previous tune and now my car is running bad and I need help

[@tuningbynick]

Whats it doing exactly - Is the previous tune a proper dyno tune or a base map?

[@chief470]

It’s a base tune , when I do a pull and shift to 4th gear my car basically turns off or like I don’t get any throttle

[@tuningbynick]

Chief - that could be so many things. It could be something simple like lean protection or something more complicated. You should really take it to a proper tuner and get it checked out.

[@regularcoach3544]

Nick we love the tuning tutorial vids your the best

[@tuningbynick]

Thanks - Im going to do my best to keep them coming

[@marcbrault-dumouchel5447]

Why cant i find advance feature on my ktuner V1.2

[@bighomieJ5X]

Never get tired of these vids 😁😁😁keep the xlnt content coming .

[@cre8tivegarage157]

Car is rad definitely loving the channel vibes 🥂🔥🔥

[@tuningbynick]

Thanks! much appreciated

[@cre8tivegarage157]

We love the flames 🔥🔥

[@philz417]

Seen like 1 or 2 videos before. The flames from the ktuner just made me hit subscribe!! 😎

[@galan_6969]

I can get flames with my set up? Rbc, skunk2 header, piping 2.75 skunk2 and intake? I have ktuner too, but with the base map reflash #3. Or i cant do it? Thanks

[@galan_6969]

??

[@maccfr8800]

Keep it up ! More videos , even if you’re working on cars

[@michaelsapp6675]

Ok so 08 civic Si, stock header/tsudo catback and cai, could you get flames?

[@tuningbynick]

as a rule of thumb, if you have a very high flow straight through exhaust with no CAT, you should be able to get flames - But if you have a CAT, or if the muffler has baffles or chambers then you probably wont be able to get flames

[@hemi5310]

can i run a ktuner k20a3 on a 03 base

[@tuningbynick]

yes you can

[@Claasic]

Any possible way of doing this on Hondata S300 Civic?? Amazing tutorial too ! thanks!

[@tuningbynick]

As soon as i get a good car in, i'll do a video for S300 - Thanks!

[@Claasic]

Tuning by Nick thanks brotha, will be checking it out !

[@philz417]

I’d be keen on seeing you do this on Hondata S300 as well!!

[@itsrobb1]

im in love with a Canadian. his name is nick :)

[@juniorvisionz954]

Can you do a b series on hondata ?..

[@tuningbynick]

As soon as i get a good Hondata car in the shop i can definitely do a video

[@DeathStrike-jk8gt]

Do you need a in-ecu hardware for any ktuner v2 applications or is it just for rsx? I want to tune my 14 accord and i dont know what i should get. I would prefer ktuner v2 since you can switch tunes without going around with a laptop and the fact you can save tunes to the v2 is just amazing.

[@tuningbynick]

Your car would doesnt need the "in ecu" board, its all done with the OBD2 port, no hardware modifications required - Before you buy a tuning system, check with your tuner as to which system they recommend - There are differences

[@infinitbladerx]

Should the engine be on or off during reflashes? For example when turning on real time tuning, should I have the car in accessory mode and then turn the engine on after the flash is complete?

[@tuningbynick]

Engine can be running when using realtime tuning

[@Dnagraphicz]

I have a build jst like yours. (Milano Red) I dropped a accord k24a4 stock /type s 6 speed trans. But Haven’t got an ecu. I think am going for ktuner. I would I get same results as you??

[@oldsklteg]

Nick has a K24a2. Different engine

[@tuningbynick]

Thanks - This is true, my K24A2 is a very different engine then the Accord. Unfortunately yhe Accord engine wont make this same amount of power

[@loveyourmom990]

Notification squaddddd ❤️

[@alcronoIexus]

Great video man. Car sounds great. Really like to see the flames.

[@johnnythibodeau8962]

Hey there. So I just z3 6 speed swapped my 2006 base. I have the digital speed sensor off the 3rd gear. I’m wondering what would be my best option to adjust my Speedo reading. Ktuner in my stock ecu or go with kpro in a 02 to 04 ecu?There is literally next to no information on the 05/06 models in the forums. I also need to be able to shut off my intake runners as I have an rbc, 70mm throttle body, headers and exhaust etc. Any insight will be greatly appreciate and thank you in advance.

[@D.D.S.C]

Hey I have a 2002 RSX type S. I’m trying to get into tuning. Can I just buy a KTuner? Or do I need KPro because of my car is an 02’? Thanks, just trying to learn

[@nicktunesnemesisperformanceINC]

Would you be available any time soon to do anything with ecmlink like we were taking about I can put the car on the dyno and you come in remotely

[@tuningbynick]

Want to email me your tune and i can take a look

[@nicktunesnemesisperformanceINC]

Tuning by Nick yes!!! Please what email lol

[@nicktunesnemesisperformanceINC]

Also need to see what is up with the fuel because I switched to bigger turbo 57/57 with 880cc injectors and I can’t get a 14.7 afpr at idle but I’m sure you will be able to see what it needs as far as that goes

[@nicktunesnemesisperformanceINC]

Tuning by Nick can you send me your email?

[@zachwhomadethis]

how did you learn to tune?

[@tuningbynick]

Thats a long story - But basically i started with my own car, then friends cars, then friends of friends, then opened a business

[@Sp33distic]

Would it harm the motor to have ignition cut without having anti lag enabled and fuel and ignition on 0 for a NA motor?

[@Sp33distic]

@tuning by nick also would it harm the motor if I have both ignition and fuel cut ?

[@Sp33distic]

Bump as this would be helpful information. Reason why ask is because I love the rapid rpms just without the pops and bangs.

[@keyonb8053]

Hey Tuning by nick I want to set my 2step on my accord but it doesn’t give me all these settings and options to mess with the fuel and ignition. Is there a certain way to get to this page?

[@user-hh4hc2lt6e]

Do u have any ktuner dbw tuning videos? Like a cl9

[@liamhenry3046]

Hey umm I wanna do this but I can’t see the advanced features or stuff on the side bar.

[@johnsamuels7931]

Nice video Sir

[@three2sedan]

Hey Nick! Great video, let’s say I want the pops but no flames, can i just mess with the ignition settings and leave the fuel alone? And is using the 2step ignition cut harmful to the engine?

[@tuningbynick]

You can definitely leave the fuel alone. I show that in the video.

[@davidchieng1625]

the knock count going up is normal? I had around 4000 knock count after a dozen 2 steps

[@J.C.BUILT_ig]

How do I do this on my 10th Gen si with KTuner ? I don’t have the option to use ignition cut

[@tjxsom]

Are you able to make these kinds of videos with Hondata flashpro?

[@elmatagato8793]

also i wanted to know with the pops and bangs tune i just want to have very loud bangs

[@heatherdeshevy8401]

Hey Nick do you keep real time tuning enabled after everything is done?

[@tuningbynick]

I believe you have to have to turn it off once done - But my program is the dealer version, so it is a bit different then the end user version

[@heatherdeshevy8401]

@@tuningbynick Thanks :)

[@MrJohnHughesHimself]

Something is limiting my ignition timing to not go lower than -10. I’ve poked around and can’t find anything, any ideas?

[@MichaelKLee-jf7qs]

Super helpful man, great video!

[@bigsurf223]

does it make any safer to do it with pops and no flames by any chance lol?

[@dailyz5876]

Can I bring my you my type s so you can tune mine lol

[@tuningbynick]

for sure you can

[@dailyz5876]

Tuning by Nick as soon as Canada opens up I’ll be on my way up there

[@tuningbynick]

@@dailyz5876 That would be great - Im looking forward to thing getting back to normal

[@dailyz5876]

Tuning by Nick how’s a better way I can get a hold of you for location and find out to see if I need anything else

[@tuningbynick]

Daily Z - email is best. [e-mail]

[@coleyman1000]

Hey nick I'm.just wondering onnthe fuel enritchment side if things is it flooding the cylinder with fuel set to say 300 or 400

[@RSXYYYY]

if you went lower rpms, would it pop slower?

[@elmatagato8793]

can kpro v4 do a crazy loud 2 step

[@lewinbarnett1761]

hi nick, can you tune my ep3 ?

[@krazie2489]

Can you make a video or guide me how to adjust my afr. Its rich on wot high rpm. Ktuner

[@kennguyen8966]

I like your video! Can you do a video that show the best way to do a standard tune the k24 engine with including both software and hardware pls or if you already have one then pls send me the link. I’m very appreciated!

[@06Dc5.Jordan]

Are u running the k20 map ? Cuz on my ktuner revision 1, k24a2 map don’t have anti lag😒

[@tuningbynick]

Yes - I am running an RSX K20 Map - Then I tuned it for the K24 engine

[@bigapevq5998]

Can I do this with my tl type s

[@lmaoboy8546]

I have an Acura TL 09, is there any way you can do a flame/pop map for a 3.5 V6??

[@ex_retro6426]

What exhaust do you have?

[@rcysiFg2]

Awesome video as always! Hopefully Flashrpo 2 step flames is next 😎

[@tuningbynick]

Thanks - I have a Flashpro car lined up for 2 step video in about 2-3 weeks, stay tuned!

[@ethanjonas128]

My car pops when disengaging out of vtec, don"t know what cause it

[@StreetMusicForTheBlock]

Sub'd !! Good content. Currently doing a k24eg. First start this week!!

[@athao2839]

rsx ktuner ecu prb tuning tuned

[@k20dylan]

You should do a series of these 2 step vids with an 8th gen civic si

[@ethanalkout949]

The question now is, where can i find that tuner kit

[@jaysonengelhardt]

Would this work on 08 si?

[@tuningbynick]

It wont work the same with on an 08 Si with Ktuner

[@jaysonengelhardt]

Dang that’d be pretty cool, for the cradle tune u did on a 08 si, is it bad to take degrees off for ur engine at all to get those cracks

[@Papi_Ej8]

Tsx owner here what has been done to the engine? Just full bolt on?

[@mosessolomon1575]

Does the 8th gen accord have anti lag settings on ktuner

[@JK-dz5zh]

Can i do this to auto?

[@mosessolomon1575]

Is this a manual or auto

[@lifeschoice6235]

Ktuner need to work on their download speed, it's so slow compared to kpro

[@trystanparks4599]

Where you able to find advanced setting?

[@djsthemetereman]

Man this was very informative, waiting on my v2 for my 18 aspec, I maybe the first to do it on this year model because I haven't seen any vids on a tlx install

[@Claasic]

Next video 2 step tuning on Hondata S300 haha

[@boostedpurp]

Anyway i can shoot flames without anti lag settings on a 9th gen si with Ktuner v2? I dont see any anti lag settings on the application.

[@tuningbynick]

Unfortunately i dont think its possible with Ktuner, it just doesnt have those features unlocked

[@roylewis1060]

Hey man do you have Instagram or Facebook i have some questions

[@tuningbynick]

i have IG - @tuningbynick

[@ChaosCorbinMotorsports]

Is this specific for the RSX or can i do the same setup with my 01 Civic?

[@tuningbynick]

If you get a programmable ECU for your civic you can do this too

[@kevin57762]

You The GOAT ‼️

[@Smokeblast1]

does anyone else see heated seat buttons

[@damianj6305]

How do you do 2step willing rolling on kpro?

[@jamesbond2187]

Kpro or ktuner for my Rsx base k24a2 swap

[@tuningbynick]

My personal preference is Kpro - Best to talk to your tuner and see what they recommend

[@MigzNthings]

I love your videos.. Nick what do you prefer. Ktuner or kpro.. Pros and cons.. I personally have a DA integra with k24a with 2.2 drag cartel cams plus S.Tech valvespring and retainers ..50* vtc oil pump ported by myself 750cc injectors on flex fuel .. TWM itb setup ..

[@tuningbynick]

Thanks! Personally if it was my setup I would choose Kpro. It’ll make your life easier

[@MigzNthings]

@@tuningbynick awesome.. you're not the first one telling me that .. I even thought of buying an AEM setup due to its features of adapting to the atmosphere changes on the fly without having to log in

[@sebastianpaz7946]

can you do 2 step with a test pipe ?

[@albertizdead3758]

hey nick, how bad would u say this is for my car , like how often would i need to be doing this for it to actually cause damage

[@spoontl]

Kpro or Ktuner? I need opinions from people w more experience than me haha

[@tuningbynick]

Who will be doing the tuning? This is a discussion i would have with your tuner. My preference is Kpro

[@lucacesarano5093]

How can I get a hold of you I need a tune

[@tuningbynick]

Best way is email, i always put it in the video description - [e-mail] - shoot me, i am always happy to discuss tuning - Thanks

[@domEk24]

Does this only apply past when vtec engages?

[@SpoonHatchySi401]

Hey I have a question is there a different version of the board because your is blue and I'm looking to buy one but it purple ... I'm new to the rsx world ... thanks in advance

[@tuningbynick]

Yup - Mine is a dealer version of the board, thats why its different

[@SpoonHatchySi401]

@@tuningbynick so how many version does ktuner has ? ... Is there more then one version like ( example ) hondata kpro v1 and v2 or v3

[@tuningbynick]

Unfortunately that i dont know, if you send them an email they usually reply quickly

[@SpoonHatchySi401]

@@tuningbynick Ooo ok thanks

[@ZentuDesigns]

Do the exhaust have a resonator?

[@kiki022189]

Great contents. I have ktuner on my 05 rsx type s but not giving it a good use just upload the stage 2 map that comes with the software due to that dont have any dyno near me. Any advice to get advantage on this? It will be appreciated. Thanks

[@tuningbynick]

If there is no dyno close to you I can help you out with etuning / remote tuning the car to get it running properly. If thats something you are interested in, shoot me an email - [e-mail]

[@kiki022189]

@@tuningbynick sounds good

[@kiki022189]

@@tuningbynick just sent you the email

[@lionardomartinez818]

Can you add a link to this product

[@tuningbynick]

ktuner.com/

[@edwardortiz7707]

hey can these settings be used on a 9th gen civic si? im running on K Tuner as well with mods and catless as well.

[@tuningbynick]

It unfortunately wont work the same on a 9th gen Civic because there is no ignition cut

[@edwardortiz7707]

Tuning by Nick do you have any videos on a 9th gen with a similar 2 step setup?

[@RACEALOTGARAGE]

This was without the added relays?

[@tuningbynick]

Correct. Without the relays.

[@RACEALOTGARAGE]

@@tuningbynick nicee

[@s0ul438]

NA????

[@slowskietube]

How come we can’t do this on Kpro??

[@tuningbynick]

Did you watch the Kpro version of this video? kzbin.info/www/bejne/mqCqnYp5j7-dkM0

[@cheetoshotfries2289]

How long does a dyno tune take?

[@tuningbynick]

usually about 1 to 2 hours depending how complicated the setup is

[@felixls6191]

Seeing the rsx with 2 step 🔥

[@bigjames95]

Does Ktuner on rsx support forced induction?

[@tuningbynick]

Technically it does - But talk personally i would want Hondata if i was going forced induction

[@bigjames95]

@@tuningbynick thanks for the reply, for what reasons if u dont mind me asking?

[@9blockperformance948]

Can you do s300

[@tuningbynick]

I plan on doing a S300 video when i get a good car in to use

[@JigglysRvNg]

Does the year of my rsx matter?

[@tuningbynick]

Year does not matter - You can do this with any year RSX

[@JigglysRvNg]

Tuning by Nick oh ok thank you, i am barely just starting out, family bought my rsx in 2015, over the years its gone bad but im fixing it up, also thanks for inspiration.

[@comeconcon569]

The 05/06 RSX Type S models are the best-looking ones.

[@SIRICKO]

Sorry man but only boosted cars can have antilag not na lol

[@tuningbynick]

Technically you are correct - But this process uses those same "antilag" settings, although we are are not actually doing "antilag" Thanks

[@SIRICKO]

@@tuningbynick i agree but lets not mislead people.

[@MichaelKLee-jf7qs]

@@SIRICKO The antilag system here is created using numerical values on the charts found in the tuning software and is intended to serve a purpose (anti-lag), the system itself doesn't include a turbo simply because the system itself only includes the values shown. Its intended purpose is not the same as its actual meaning. Let's not get confused here

[@peterdelrosso2899]

Do you need a cat delete to do the flames with ktuner?

[@tuningbynick]

Yes. Having a CAT will always block all the flames.