oh wow, the stick pouring trick. mind blown. why have i not seen this before
@nervedamage30974 жыл бұрын
How well did this work a year later, is it a long term solution or something that will only last a little while? The product in this video has been retired and replaced with another by the manufacturer but it's more expensive.
@TheAussieRepairGuy4 жыл бұрын
Not well, I now use glue-on carbonised rubber pads from china. About $10 aud for a mixed pack of 150.
@nervedamage30974 жыл бұрын
@@TheAussieRepairGuy thanks for the reply. Unfortunately the keypad I need to repair is for a synth and the ones you can get from China are the wrong shape. I basically need something I can create a short thin line with (about the width of a PCB track) if you have any recommendations? I saw Jaycar has a pen but it's $40
@TheAussieRepairGuy4 жыл бұрын
I haven't used the jacar pen, but he pads cut easily, deending on the layout of the tracks beneath you might be able to use multiple sections.
@morongovalley9402 жыл бұрын
The small bottle isn't a solvent but a curing agent. Maybe that's why the repair didn't last.
@orfeous Жыл бұрын
@@nervedamage3097bareconductive have products for this. They have a jar and a little tube. Black conductive paint that will dry. OEM use Graphite 33. Its spray coat with graphite
@karstenwulf72004 ай бұрын
What products would you recommend to revive unresponsive buttons on Logitech Harmony 300 and 350
@TheAussieRepairGuy4 ай бұрын
I have no experience at all fir those, but you can buy glue-on carbonised pad kits from aliexpress.
@rajeshkumaar9274 жыл бұрын
Nice video sir
@alanmorcom65915 ай бұрын
If that's a Chemtronics CW2605 repair kit, the part B is a catalyst, not a solvent. It looks like the kit has gone over its shelf life. I have a feeling the paint would not cure.
@TheAussieRepairGuy5 ай бұрын
Yeah it was an old kit then, got it for basically nothing. It did cure, but not well. in the years since, I have resorted to using glue-on carbonized rubber pads instead.
@audunjemtland82874 жыл бұрын
I saw some fluid on my circuit board contant points. Is this typical to use some kind of liquid to make greater contact point?
@thanasinghdhaliwal81144 жыл бұрын
At first just clean the contact point with alcohol. If the black material is in good shape. It will work. Only when the material is damaged or removed then this liquid can help
@TheAussieRepairGuy4 жыл бұрын
sorry about the delay to reply. some circuit boards use a dialectic grease, but it's not common. clean with isopropyl alcohol, or a circuit board cleaner.
@audunjemtland82874 жыл бұрын
@@TheAussieRepairGuy Thanks for the answer regardless. I did, it helped some but reverted back. Very strange. I saw another video a guy taking a lead pencil and just putting a layer on there. To conduct I assume. Haven't tried. It doesn't conduct well even if it's clean with isopropyl alcohol.
@TheAussieRepairGuy4 жыл бұрын
I ended up buying adhesive carbon pads from aliexpress. www.aliexpress.com/item/4000788942145.html?spm=a2g0o.productlist.0.0.1e642db8CzffFj&algo_pvid=c554aa30-5a4a-4b79-b30e-efc444df00aa&algo_expid=c554aa30-5a4a-4b79-b30e-efc444df00aa-0&btsid=0ab6f83115885919246768116e532a&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
@audunjemtland82874 жыл бұрын
@@TheAussieRepairGuy Nice. That's a great tip. That'll work. Really appreciate it.
What if the infrared signal is responsive (blinking) when i point it to my phones camera, but when i point to the amp its not working..what could be the issue? Btw its my integrated amplifier remote. The volume down button not working
@TheAussieRepairGuy2 жыл бұрын
The battery could be low and the IR light too weak, fresh batteries would rule that out. it could be that the remote has several code straps (channels) and it's on the wrong one. some receivers are designed to accommodate multiple remotes and can sometimes forget which remote strapping was used if the value is stores in a battery backed volatile memory. I have DVR units that do much the same, so that multiple remotes can be used with multiple units in the same room.
@muttech162 жыл бұрын
@@TheAussieRepairGuy swapped new batteries, still not working..all other buttons are working fine..only volume down button isn't. Already cleaned the remote circuit board and keypads.
@TheAussieRepairGuy2 жыл бұрын
@@muttech16 you might have q damaged carbon pad, these are replacable: kzbin.info/www/bejne/eWevlZ6XibeYfrc
@muttech162 жыл бұрын
@@TheAussieRepairGuy definitely no problem with the pad. Tested with working pad still no response. I even tested touching with bare wire. I suspect the circuit on the board itself is faulty
@TheAussieRepairGuy2 жыл бұрын
@@muttech16 yeah that can sometimes be the case, they use very thin board in them and it's easy to crack and fracture. hard to spot without a microscope - you can test the tracks with a multimeter in continuity mode though.
@vaasukaushal45084 жыл бұрын
Where can i get this pls reply It's urgent pls
@TheAussieRepairGuy4 жыл бұрын
The paint Iget from jaycar, but not sure if it's stocked anymore. The carbon rubber pads are from aliexpress and come from china. I'm 2 days travel into the bush, I can't do anything urgently
@achitophel58528 ай бұрын
Product no longer available - often an indication it wasn't much good or long lasting.
@TheAussieRepairGuy8 ай бұрын
This is a 4 year old video... but yes I use stick on carbonized rubber pads now
@girishsonar52493 жыл бұрын
Bose remote control model no rc38t1-40 repairing button
@TheAussieRepairGuy3 жыл бұрын
I don't have an example of that model, so I'm not sure I can give any advice.
@albinjose8272 Жыл бұрын
Everyone repairing rubber. No one tells how to rejoin pcb
@TheAussieRepairGuy Жыл бұрын
Yeah, right here: kzbin.info/www/bejne/kJ-bhZqYYtKebsU