Rubio Monocoat Finish Sample - Stain and Seal in 1 Coat

[@chrisvandeventer3540]

Knowing what color you used on each section would be helpful. You spent a lot of time doing this video, which is appreciated, however it doesn't help the viewer when we don't know which finish matches up with what color.

[@HazelOakFarms]

go to my website I have a page dedicated to finishes and colors that I use. hazeloakfarms.com

[@christinarubio9962]

Went there it doesn’t have this board pictured with which colors were used

[@BilboYachts]

would be a million views if we knew wtf was used and where! I need this haha.. ok may have to do this with Rubio...

[@HazelOakFarms]

This video was slapped together years ago. go to my website, I have a whole page dedicated to the finishes I use. hazeloakfarms.com

[@BilboYachts]

@@HazelOakFarmsI know.. long time ago. Glad to see you still going. Will check it out for sure. Thanks!

[@gtoddwilliams]

Good video but showing us, at the end, a close-up with the name of each color would make the video twice as good.

[@HazelOakFarms]

Hey thanks for the idea! You are right, I should have done some more close-ups after I got done, I didn't think of that. Thanks for checking out our channel!

[@stephaniesapienza8949]

Great!! But what are the RMC colors you used...?

[@stephaniesapienza8949]

(I can only see the Dark Oak and Charcoal labels on the final shot)

[@HazelOakFarms]

Hey Stephanie, ya I will update the info section with those colors. We used Ash Grey, Chocolate, Walnut, Charcoal, Dark Oak, Black, Antique Brown, Biscuit, Castle Brown, and Oak. If you would like some final pictures of the colors, I can email them to you. Just fill out the form on our website: www.hazeloakfarms.com

[@davidschiller4112]

@@HazelOakFarms But which are which? What order?

[@c.s.herman860]

This video had the potential to be such a great resource

[@JAT922]

The Scotch tape company 3M approves this testing process

[@modernwize]

you didn't show the final results w/ each labeled.

[@HazelOakFarms]

Send me an email and I can send you a picture. [e-mail]

[@krissyfaulkner2556]

@@HazelOakFarms please send me a pic of the finished samples with names. Thanks!

[@mecaboiteux666]

Up to Down = Ash; Walnut; Juniter (Frêne; Noyer; Genèvrier) Left to Right 1:15 to 3:50 = Ash Grey; Walnut; Chocolate; Biscuit; Castle Brown 3:51 to 6:00 = Dark Oak; Charcoal; Oak; Antique Brown; Black

[@MrLazysundayz]

I think you've misidentified a few: I reckon it's 1:15 to 3:50 = 04 Biscuit; 38 Walnut; 10 Chocolate; 01 Antique Bronze; 07 Castle Brown 3:51 to 6:00 = 13 Dark Oak; 08 Charcoal; 22 Oak; 03 Ash Grey; 05 Black

[@craigweir3693]

You didn’t really show the names of the stains on the board, just a quick flash, it would have been better to spend more time showing the differences on the board and name of stain, less on process.

[@HazelOakFarms]

video was slapped together years ago. go to my website and you will find a page dedicated to finishes and stains we use. hazeloakfarms.com

[@nonobrochacho240]

The bare wood is a finish I like to call Neapolitan ice cream.

[@westcoastbutcherblockinc.6111]

Do you use the wood Conditioner called The Cleaner by Rubiomonocoat?

[@HazelOakFarms]

no, just water pop before

[@everettgager4445]

The lack of narrative on this is perfect. Thanks for a good video and for leaving out the dribble.

[@BarryFromEastenders]

What's the highest grit u can sand too and still use Rubio. It's for a kitchen table . Thanks

[@HazelOakFarms]

180 grit, but Rubio recommends a max of 120 grit

[@BarryFromEastenders]

@@HazelOakFarms why they only recommend 120. Surely they'd go highest they can for the better finish . How high have you gone and how did it turn out ?

[@selcuk6264]

@Hazel Oak Farms can I use 600 grits or 1000 grits sanding paper for best result? Or I can’t use above the 180 grits so why? I don’t know so could you help me ? Also could you suggest some colors for pine table top. Which colors are good on pine wood ?

[@jacobcairnes521]

@@selcuk6264 Rubio Monocoat binds to the wood grain on a molecular level. If you take it passed 150 to 180, it seals the grain and the oil cant penetrate as well as it should

[@BarryFromEastenders]

Are you straight sanding after orbital to avoid swirls ??

[@fogsmart]

RO sanding and resultant swirl marks are the elephant in every room when portraying finishes…

[@Riley.Greenup]

We’ll That was a waste of 6 minutes

[@loriwatt1269]

A tutorial without explanation? Oookay

[@adrianluica6960]

your final outcome can not be seen very well

[@rickkingl]

Well that was a waste of time

[@kdavidwhite8376]

this is not a good video. which is which? no labeling, no final straight on look. a total waste of my time!