The WORLDS SMALLEST RollBack TOW-TRUCK

[@gexploits]

Good to see Zack getting more comfortable on camera and his personality coming out more. Seems like a good fit for the channel. Mini rollback is awesome!

[@Boomkelly]

Yep, was gonna say the same thing. Also, watching him get better at fabricating and welding.

[@friedaspyder8485]

Zanny Zack.

[@19Photographer76]

Well, Zack needs to become a 'lot' more animated on camera. It will either make or brake the channel.

[@friedaspyder8485]

@@19Photographer76 I don't think it matters. He has 1/4 million subscribers. I think it's the dimples.

[@saluki417]

I'd look into putting bedlocks into the stowed position. Usually its just a catch directly to the frame, not subframe, the deck slides into when it's all closed up. That way you're not putting all that stress on the valve body and lines going down the road with a load

[@murphymmc]

Zach's lack of drama is refreshing. Too many channels bring on the drama queens. The mini went pretty well considering some of the other projects.

[@f87115]

So you are saying, that ,,,,,you like real humans ? ❤ I concur

[@grizzleygangsasuke6684]

Wow I’m incredibly impressed with 3 uploads in less than 48 hrs

[@anything399]

Your dad needs one for Father’s Day for Quad and dirt bike rescues!!

[@000622477]

or do the Sa-MORR-ai wrecker for him

[@mrromantimothy]

One with a longer and wider wheelbase. put some duallys on the back huh it wouldn't be for off-road grip or anything it's for redundancy in case of a blowout.

[@MeTheTherapist]

that would require matt to acknowledge misadnventure lab KZbin channel which He clearly does not want to do.

[@Mark_Bridges]

@@MeTheTherapist It could come from this channel, avoiding that problem.

[@Youjackwagon]

@000622477 That's why he has his off-road trailer. Way simpler.

[@davidborboa77]

Landscapers would love that. It could carry a ride on mower. Housing complex work, to get into smaller roads without blocking traffic.

[@000622477]

yeah you could probably actually resell these

[@f87115]

I have scaped some land, so yes❤

[@rarelyright]

Paint it pink and call it pinky tow

[@timanderson9163]

Hey Rudy. Here’s a suggestion. If you had a set of square tubing that could slide in som pockets below the bed rails. That you can slide the tubes in and then fold the Sides out flat if you need extra foot on each side. Just a thought.

[@joshuakasprowicz5148]

Came here to say the same thing, add a winch then you could load up sxs or what not.

[@Tube_America]

You can have the same support by putting the sliding tubes inside the bedsides sliding down after pulling a pin.

[@Djk______OR]

Rudy churning out the content! Well done, lad!

[@ramjam720]

Looking good. I think that I would've avoided grease on the rails. Nylon friction pads slide really well, and they are not affected as much by sand, heat, cold or water.

[@MrGarfield4]

Agreed. The grease will attract sand and debris, grinding everything to pieces, eventually binding up the mechanism.

[@donanything6816]

Yup, it's not guna be fun cleaning out the goo once dirt, dust & sand have caked into a solid mass hindering movement. Though it likely won't have many more appearances after the debut. Fun project in that what the heck sort of way.

[@Rudysadventureanddesignreal]

If it becomes a problem, it can all be changed later. All of the rollback tow trucks I’ve operated have been this way.

[@AFloridaSon]

I was really bummed when you left MORR, but seeing what you've built over the years (has it been years?), it's obvious that you made the right decision.

[@DaleKlein]

Have the bed sides able to lock flat at 90deg, so the bed can be a wider flatbed and able to fit wrecked side-by-sides on it. If the whole thing doesn't tip over sideways! Eh, maybe not, it's pretty short overall....

[@TravisMcCauley-r9v]

Glad to see Janelle back in the picture

[@TheDon8771]

“Tiny tow” I love it. So dope. But it’s not useless. Lawnmower service company would love it. 😂

[@boomstyk4urboo]

Or to trailer a dirt bike or two.

[@TheDon8771]

@@boomstyk4urboo definitely.

[@robhawthorne6892]

Ya may have found an untapped market! $$$$$

[@MrFredsDIY]

The “Tiny Tow” really came together. Great job!

[@georgevindo]

Wonderful job there. I too wonder about the sand getting into the grease. Now, you need a little safety leg for working on the hydraulics with the bed raised. You wouldn't want anybody crushed under that thing if it dropped suddenly. Great job you did on it. Thanks.

[@toddhoffmaster6057]

So, is this a pinky tow truck? Pinky toe LOL It was so great to see and meet you & Janelle at the Offroad Games this week.

[@dylancampbell17]

Just tip from a rollback driver. In the environment they are using it greasing the slides just traps debris and speeds up wear.

[@BlazinBill]

We use graphite up here eh

[@JMR-1953]

Totally awesome! Trevor, Tucker and Georges are going to love it.

[@LeonardHickey]

i would suggest a latch of some kind on the front to help lock bed down when sitting on the frame just like a large rollback. all it has to be is a piece of steel mounted to truck frame that when the tube slides forward goes inside the tube. other than that its freaking cool, great work.

[@petergrimes2466]

Thats pretty kool!! Might make the sides 3 position to go down, lay flat, and up!! If you can get them to lay flat you might be able to get some of the smaller side by sides on there with the extra width but thtey would have to be the 2 seater shorter ones!! Looks awesome

[@mmorgz6622]

Bloody hell, so many uploads this week. I love it.

[@greywilson7156]

Zach is a regular ray of sunshine.

[@johneisnor]

Rudy and Zach(k), that was an awesome build! Loved it! Can't wait to see it at the off road games

[@robertbruno2863]

Cool vehicle, now you have something to recover Mini-cooper's, Fiats, and Smartcars from the dunes. Great video

[@Typingwithpaws]

Proof that if you are prepared to wait long enough, all ideas will be created by KZbin hahahaha. Been waiting for someone to do this. Nice job!

[@s7courier]

One of a kind. It is sweet. Great job.

[@mrromantimothy]

I've always had faith in Rudy, he has the talent and what it takes to become a standalone KZbin channel 3 uploads in whatever time keep it coming rudy it's paying off you and Trevor were a big part of the early success of MORR, show it .

[@MarkoMygun]

Very nice job guy's, that thing is AWESOME. Trevor owes you big time for this lol. Thanks for the video guy's can't wait for the next one.

[@mikepardue6583]

Glad that you were posting more videos

[@000622477]

you guys should tap a couple grease fittings on each outer rail to make greasing easier and neater

[@lory2622]

Like most of us, I watch a LOT of these channels and it is ALWAYS fun watching a new personality, like Zack appear and slowly develop and grow into a cool piece in the puzzle.

[@johnkraemer839]

Rudy Its not totally worthless. You can use it as a jack to change rear tires or put chains on or lift it off rocks if high centered Im just hoping it has enough front weight to stay on the ground when loading stuff...

[@Alwhite1929]

Looks great but that grease is going to attract sand/dirt - plastic slides would be better.

[@handyman75657]

Good for Lawnmowers and Golf carts!!!!! I would just about bet that more uses can be figured out for the overgrown Hot Wheels?

[@saginawdan]

Nice engineering, Rudy. Thanks for the increased content, too! 👍👍👍

[@richardthomas1743]

HEY Good morning Rudy and Janelle !!

[@WatanabeNoTsuna.]

It was such a relief seeing Janelle on video! Her being gone for the past few without any explanation* and Rudy putting out multiple videos a week like he suddenly had a lot of free time got me worried... I not it should be none of my concern, but they look like a great couple, from what they show, and I want the best for them. *I know they don't owe us any explanation of anything, but one would expect a casual throw-away "Janelle is visiting her parents" or something like that.

[@davidborboa77]

All that grease and your going to the dunes. That's going to be a mess. But I can say great job that's pretty slick. I like it 👌

[@Mark_Bridges]

Yeah, grease isn't going to work long term.

[@timanderson9163]

Also needs a Latch at the front that secures the bed in the down position.

[@DaveNave-jc8wt]

Rudy needs your vote for the OnXoffroad build challenge!!!

[@RBJeepN]

Looks like a fun project. Hope to get out in the shop more to do some fabricating of my own.

[@pbrock669]

So two mini tow trucks at the off-road games yours and Peck Brothers tow truck awesome

[@rfcmironchuck8628]

Best thing youve done so far , plus other stuff, loving it, good job!

[@donhitchman4227]

I totally agree with one person's comments. In most applications grease holds on to more debris and causes excess wear, whereas nylon pads would make it slide easier and also they don't trap any kind of debris that will cause premature wear

[@joshuafassl6620]

That would make a great tow truck for broke down motorcycles.. On the side of the highway or off road. Just think of bike week. You could get in and out of tight areas.

[@edwinschlee8374]

That is a very cool tow truck! You two did a great job on it!

[@davidbenji1]

It will be AWESOME to see your dad's HEAVY WRECKER on the back of the TINY WRECKER!!!

[@ShineRunnersGarage]

Dang Rudy been busy with the uploads. Love it man.

[@tjtobin86]

Is there a locking mechanism for when its lowered? The big rollbacks obviously lock into the rails as they slide back and I'm not sure you have the room for that, but maybe even just a small bit closest to the cab that it could slide into and lock down?

[@leonardbixler102]

Almost seemed like a continued program of cletus and squirrel rebuilds the rollback. Could be really useful in hauling bikes & quads off smaller trails.

[@thefragglejack]

You're making exactly what I want to haul my Can-am Ryker

[@christopherthompson4359]

The rollback is RAD😂. It turned out awesome. Can't wait to see it in action.

[@marvindebot3264]

Not just mini jeeps, every ATV racing club in the world would love one of these. Also lawn mower dealers, bike shops and others.

[@Ocboy420]

That’s pretty cool. Definitely would come in handy

[@rshutterbug47]

That Little Tow Truck Roll Back is AWESOME 👍👍👍👍👍

[@mrromantimothy]

There's a definite need for that little truck, it's for recovering all those side by sides, and their way too often broken swing arms, forget those Brothers (whatever their name is)and their wrecker that is unsafe at any speed as a Tow Truck.

[@ian3580]

A side-by-side is about 6" wider than this truck

[@danpeck1261]

You need bed locks on the front so it doesn't tip while driving...so when the bed slides forward, the sliders slide into locks to keep it from tipping, they should be at least 10 inches long for that little thing

[@compustat]

That thing will be great for Side by Side rescues in tight areas that your Dad cannot fit his wrecker. I like it.

[@shooterchief]

That’s perfect for unloading a 4 wheeler, once at the mud park!

[@derekb505]

You need a pilot operated check valve to prevent the fluid from free flowing out of the jack.

[@Owens_Racing]

That would be sweet for delivering pallets and feed.

[@jefflaufer3205]

Glad that hydraulic worked out. I was wondering if the ram being off center would cause binding...

[@thegiannis559]

“You’ll have that on those bigger jobs” gave me a flashbacks to welding school 😂

[@Todd936]

Respect 🫡 Rudy you’re always happy just like Paul at fab rats. Cool job man. Best of luck to you man.

[@lonhoschar1943]

Great job on the mini rollback!! It looks really good!! You make it look easy to build things in your head and then actually get it built with your hands!! Can't wait to see it in action!

[@periwinkle-dragonfly]

Yay!! A mini rollback for the mini jeeps!! Good job Zach & Rudy!!

[@rschrisman]

Awesome build!!! Perfect for the mini Jeeps. Great job, Rudy & Zack.

[@daryl5638]

I don't have a need for a truck like that, BUT I WON'T ONE! :} Great job

[@HavocSun]

This a very nice build! It has so much potential! See about making it more off road worthy. Lift it, see about adding a 4 wheel drive, or at least try to add posi-traction to the read end.

[@Giel-n3u]

That is so cool, the RudiRadWrecker. Rock on guys. Seriously you guys have the right mojo.

[@HavocStylesJoe]

Pretty dang good.👍

[@johnengland7097]

Awesome build. Glad to see you back.

[@MrWeldWell]

Working with Zack would be challenging as he doesn't seem to be very enthusiastic about the job. It's important to have team members who are passionate about their work, as it can inspire others and lead to better results.

[@JRs-Garage]

Mini rollback is fantastic and cool for the misadventure lab! And I just saw the plasma table in this video so it answers my question from the last video 🤦🏼‍♂️as to where was it in the new shop 😂

[@jessebreitenbach2015]

😂Zach cracked me up I’ll take half the blame. yeah Rudy ya should’ve made your holes right! .. great video guys! It’s nice to see Zach settle into being filmed. Seems like a great guy.

[@jesseleesamples]

Glad to see you posting more videos cause I really like watching the stuff you put out. I’ve been hoping for a while now that you’d get settled in at your new shop and start pumping lots of quality videos out making cool stuff like this

[@mattc.310]

Turning out pretty cool. Bed locks, tie down slots, and a winch and you should be pretty close. Maybe some suspension. Some storage boxes on the side would be handy.

[@scottd8097]

That thing is turning out awesome.

[@roberthiggins1142]

That is an awesome little unit now all it needs is a winch & the valving on the up & down system sorted..

[@danafaulhaber334]

That thing is wild an seem so impractical except for little rigs like their mini jeeps which actually makes this mini rollback perfect for what they will need/use it for.. cant wait to see it fully finished & picking up its first load.

[@ybuszone]

I lived on Catalina Island in California and the town of Avalon has a tow company that uses a golf cart to haul golf cards with a boom and sling. Smallest tow truck I know of.

[@tarfeef101]

nice. new bumper to fix that approach angle, winch to get dead vehicles loaded, maybe a stop mechanism to ensure you don't lift the rear wheels with the bed tilt (can't be good for the components), and this thing looks pretty sweet

[@jimpearmain7882]

Love the content Rudy. Would like to see a mini tow truck meet up with the Peck Brothers.

[@philh82]

I think you need to get Lizzy over there to teach Zach how to weld. If he's not a welder😅😂

[@NOVA-VROOM-VROOM]

ZACK needs some morning coffee ☕️ for motivation....!!!!

[@dicktrickle4197]

He’s about as exciting as wallpaper

[@marvindebot3264]

Zack may not drink coffee, this Utah, remember.

[@pestcontrolguys]

If you need to swap the rear tires, no jack needed! Awesome build!

[@brettnipps7205]

Having been to Japan I understand why they build such small things for their streets. Nice job engineering such a thing!

[@jakeford7688]

Love the look on Higgins face he wasn't taking the blame for nothing

[@carlosv393]

The ability for the bed to go past level is great. If your recoving something on a slope you might need that extra angle. I imagine the only thing this could maybe recover are small sxs or riding lawn mowers lol, or other small equipment that needs to be moved in tight spaces. I absolutely love this thing.

[@grahamquigley8818]

This mini wrecker would make for a good dirt bike recovery rig. Good stuff!

[@ChrisScales17]

If you tilt the deck too far remember that you lose your e brake or being parked in gear once those rear tires leave the ground

[@jerrycarpenter7218]

I love that truck. It's perfect for the Golden Nugget.

[@ian3580]

Golden nugget is wider than this truck, let alone the bed

[@leekrauss7525]

I sure hope ya are going to add some flat bar into those cuts in your cross supports- they have a good chance of failing when put under a load- take care

[@basquo2]

I would be willing to bet that was some supports and locks for those fold-down bedsides that you could increase the ability to haul different things with it. Pretty nice work guys

[@Tiberiusva]

Starting a new business? Tow Trucks for driving mowers?

[@oldinuselesshancox5194]

Nice work lady an gentleman Looking forward to Gorge being squeezed in middle , has to have all 3 in it when it’s driving out 👍🏼🤟🏼🤙🏼🖖🏼

[@jba68]

Good Work Hombre's Looks awesome!

[@petereriksson4405]

Sooo not useless, its awesome for getting bikes, quads or atvs. And being able to lift the truck with the bed could help it self recover if it gets stuck

[@javman03]

I think you can probably call it the worlds smallest roll back. Its not really a wrecker, theres no boom!