Ruger Precision Rifle®-Tech Tip-Disassembly

[@BrianMacKay]

I've waited for a while and now have one in 243, wow this cleaning procedure is quite elaborate compare to a SR556 or a AR15. I guess I'll have to watch this video a few more times while cleaning my rifle. A little more complex than what I am used to.

[@MangoMike316]

Beautifully made rifle! Ruger has always made great rifles but this one is a game changer, Thanks Ruger.

[@danegner7267]

You should tell the size of the Allen wrenches as you use them.

[@JeremiahPTTN]

Please make these faster my dealer can't get any and I'm drooling waiting on it!

[@jaypence332]

Please don't make them faster and machine the upper where the barrel attaches level.

[@troymichalik6463]

PLEASE SHOW THE VIDEO ON HOW TO CHANGE OUT THE BARREL

[@markweekes1042]

Anyone know what to do if you turn the Bolt shroud too far and it clicks? It is locked in place.

[@davemolloy6590]

What if after reassembly you rotate the shroud the wrong way and the firing pin is now visible protruding out the bolt face? Asking for a dummy, me...

[@michaelslaughter6557]

Great video! Thank you for passing on knowledge 🙏

[@cshaffer8258]

I just purchased the 300 win mag. Seriously can’t wait to go and start pounding targets! I noticed they didn’t show how to remove and reinstall the firing pin. Doesn’t it require cleaning? They conveniently left that out as I know it’s a pain to reassemble.

[@tazfxrp]

Love my rivers and this one gets a lot of trigger time. Thank you Ruger

[@rogue203]

Anyone having an issue with the Stock release button? it's jammed up tight, cannot get it to release to fold stock.

[@topoff33]

rogue203 yup just bought mine yesterday, stock button is harder than hades to push

[@fromzerotohero7989]

You have to send it back to Rugar I had to do that to mine

[@Sinister_Reaper]

I wish they would fix the damn stock release that always gets stuck

[@jokinjoe5]

Reaper I found that if you push the stock away from you while you press the release it makes it easier. Hope this helps you!

[@steveduvall5981]

I cleaned mine a month ago after it came in (waited 3 months) placed a new Vortex Viper EBR 2C 6-24x50 on it last week and took him to the range 2 days ago(1/2/2016). Oh man is this rifle "SWEEEET", It is solid and recoil is like my 5.56 AR. Groups ? hell I was missing a few until I brought the target in(100yd. indoor rifle range@ Bass Pro Shop) I found that they were within each other or so close side by side that I couldn't tell from my distance away, I had to shoot away from the group to see a whole separate hole. If you have the chance BUY THIS RIFLE! After 12-13 rounds( ammo isn't cheep or easy to find-try Sportsmans guide or Cabelas ), with "LOVE" I cleaned it again- very easy to do. Hunting here I come.

[@bravo_chav]

It’s a 3/16 Allen wrench for disassembly

[@MaX011967]

After round about 400 shots with my .308 the extractor claw break ... looks like the material have an issue ... hope it will not take to long !!!! Did you have a hint for this please ... ????

[@444Kevlar]

i turned the back of the fire pin to far when i was trying to take it apart. what do i do now to get it back. It's past the black mark.

[@silverraider2688]

For everyone that is complaining that this video is to difficult to understand, are the reason for gunsmiths ! If you cant change the battery or oil in your vehicle than you probably cant do this !

[@R_Mcfadden]

My bolt assembly has been jammed up for 6 years now and wont turn with tool. Even bought a metal tool to add more pressure, still nothing. A little annoying. Would 've been nice if I could clean it out one day.

[@saltyearth8162]

I wish you would say what size Allen runch you're using. 😔

[@travelerfourever1347]

HELP!! The tool used to compress the spring on the bolt assembly came loose as I disassembled the bolt. How do I compress the spring in order to reassemble the bolt group? Is the a tool to compress the spring?

[@gregmintel9601]

Travelerfour Ever did you ever get this figured. Same thing happened to me. There is a great video on how to do this on KZbin.

[@travelerfourever1347]

@@gregmintel9601 Yes, Ruger sent me a link to their instructional video on how to reset the firing pin. Thanks

[@Revonemedia]

@@travelerfourever1347 what’s the link???

[@RychuRychu]

I got mine before yesterday awesome I was waiting for it for two weeks yeah the dealer told me its going to be four months wait one of the dealer in Connecticut Hoffman guns for the good guys call me and told me that he got one I bought it yesterday love it

[@philipccr69nolan66]

Sir , just got RPR. Just wanted to know, does the 20moa ramp can't up in the front of scope (objective) end, or to rear of scope? Scope w 56 mm objective lense nearly touches top of hand guard.

[@cityrice5]

The firing pin tool at 2:08 what happens if it pops out how do i get it back in? Any advise would be really helpful.

[@saltsea9499]

+cityrice5 I used the shroud to push the firing pin cam back in until it was held in place with enough room to reinsert the tool. I then had to remove the shroud by pulling it off and then re-insert the tool so that I could reassemble the bolt, function check and vent on here about a slack video.

[@cityrice5]

+cityrice5 Tip to everyone else do not remove the firing pin just throw that stupid tool away. LOL

[@pallyboy150]

Salt&Sea *!

[@darthwilkesboothe6924]

It popped out on me too. I closed a crescent wrench on the 2 edges of the fire pin and with the pin facing down against a table or block u can depress the spring and slip the tool back in.

[@joelijo7859]

Is it possible to swap my old bolt action group for the new one

[@huntertullgren2914]

Just made my purchase of this rifle love it so far but I am having 1 small issue. That piece that you take out of the bolt that stores the tools and is used to release the firing pin will not stay in place in the bolt. I’ll twist it and it seems secure but then I pull the bolt back a few times and the thing gets loose and will fall off when I fold the stock. Am I missing something here or doing something wrong please help !

[@jerryagin4012]

Whish everybody else could do as good as job as he did on the diy videos..btw this gun is bad ass!!!

[@snapcrack55]

I have a stuck safety. 1st round....! slamming the bolt & increasing the trigger tension helped a little. still happening! fix?

[@user-kl2qi3hm5n]

great video, thank you

[@provostdronesolutions7487]

Every bolt i have seen on videos are steel, mine is black...why?

[@KorgBasharwahbePaxpaMG]

are the ruger precision 300 and 308 and 338 come the same range ? and are they come with the same bullet size?

[@xibfwbntxoovvajmuas2362]

help.! for my RPR the bolt won't retract at all after load an ammo in the chamber, what is wrong? was it bad barrel?

[@54swingline]

Anyone have issues with the plastic firing pin tool? Mine just slips right out.

[@huntertullgren2914]

This is exactly what happens to mine just picked it up yesterday. did you ever find a fix ?

[@54swingline]

@@huntertullgren2914 Ruger sent me a new one -- their customer service is very good.

[@nicscov]

This video is VERY basic. Needs more camera angles, etc. 2:09 My bolt is slightly different (18029) so the doo-hicky doesn't fit well and it came out when I pulled the firing pin free. Now I'm fighting to get the spring depressed...

[@444Kevlar]

I got it i had to pry it with a screw drove then get the plastic tool in to get it back.

[@Racer88]

Great video. Just one problem... the very first time I've tried this, the freakin' plastic tool BROKE when I pivoted it to remove the firing pin. Now what??? Aaaaaaagh.

[@Racer88]

I ordered Anarchy Outdoors' Titanium bolt shroud and tool moments ago. While I realize the RPR is an economy-level rifle (and quite the value), that Ruger would make this tool out of cheap, flimsy plastic is a bit of a surprise. The two tabs broke off literally the first time I tried to use it (pivoting it as demonstrated in the video) to remove the firing pin assembly.

[@brockbah2048]

@@Racer88 hope you had fun getting the firing pin re-cocked to get the tool back in. I sure did... 🤮

[@ConditionZero76]

what inch lbs of torque for re-installing all the screws???

[@aclay1662]

Two grunts should do mate.

[@chuert85]

Is there going to be an option for MLOK rails in the future?

[@einfussganger]

Check out the Seekins website.

[@TrajanowskiRifleworx357]

Is the action (where the barrel is threaded in) steel? Or it's all aluminum rifle?

[@qapsukalek]

Say guys my rpr 5.56 gets partially get stuck on safe even though its on fire doesn't even make a dent on the primer

[@saltsea9499]

This video needs to be slower paced, and have sections so that an individual can view what they need to repeatedly. There also needs to be a video on how to fix the "when the ill-fitting tool falls out because it's a joke on all of us that purchased it" resolution video. Forget about calling Ruger for support, they'll call you back....still waiting.

[@stevehanson2330]

I have 3 of these. The 308 the bolt went in pieces first try. Cycled it, springs went flying. Have fixed 3 times. Keeps doing it. Others, no problem.

[@TheCroz12]

Salt&Sea *! You can slow or speed the video up from the top right button.

[@MiamiShineCleaners]

Be advised the tool can pop out at the slightest touch and my god damn finger got stuck in it for 3 minutes. Ruger this tool is total junk. It should be advertised as back up emergency or in field use tool AND you should supply/ send a better tool along with the rifle when purchased. And make it metal for christ sake. Next warn the end user in the video that if not extra cautious they'll end up with the firing pin attached to their finger like I did.

[@vajake1]

Thanks for posting this.

[@letsgobrandon5858]

Love ours!

[@CupofTea3]

the button on the stock won't press. so I can't fold the stock

[@KennethHaberman]

The shroud won't come off the stupid bolt. What am I doing wrong

[@wizzavtx]

KennethHaberman turn it to the right 30*.....much tighter from left index which can be done but is not part of disassembly.

[@RobertVirgitticasellu]

encore ,et ,toujours bravo !!!!!!

[@davidcruise9602]

How are you supposed to clean all the metal when coming back from a day of hunting. I can't imagine oiling the entire gun

[@donaldvosburgh8337]

Don't take it hunting.

[@MichaelEgan66]

This does not work on MY ruger precision 308. The gap in the plastic tool to remove the firing pin is no where near wide enough to fit over the firing pin assembly as shown here.

[@Serenityindailylife]

he says the word safe more than my lawyer.

[@carminedesanto6746]

I had to Ruger's customer assistance to find out what brushes were used.

[@Supinepaprika]

the allen keys a 5/32

[@jsilvidi9490]

VG video TY

[@JoseGarciaP]

@2:30 OOPS!

[@lanenicholson3712]

Striker. Not a firing pin.

[@larc9311]

Ruger Precision Facebook Group>facebook.com/groups/1615893251996077/

[@jayripp9270]

4:51-4:55 reminds me of me and my ex wife

[@vrvr6263]

👍🏻

[@MiamiShineCleaners]

Be advised the tool can pop out at the slightest touch and my god damn finger got stuck in it for 3 minutes. Not cool. Ruger this tool is total junk. It should be advertised as back up emergency or in field use tool AND you should supply/ send a better tool along with the rifle when purchased. And make it metal for christ sake. Next warn the end user in the video that if not extra cautious they'll end up with the firing pin attached to their finger like I did.

[@Datacorrupter234]

ehh