Rugged Suppressors Universal Mounting (HUB) Options

Learn about Rugged Suppressors' Universal (HUB) Mounts for industry standard 1.375x24 threaded suppressors. This video also highlights how to install/remove these mounts on the Alaskan360 suppressor. To learn more about Universal (HUB) Mounts here: ruggedsuppressors.com/suppres...

[@ccdme891]

Been waiting for mine for over 9 months and was hoping you all would put out a video like this, thank you. I’d actually ask that you do more and stick with the rum mount start to finish with live fire and do another with the booster and another with direct thread, these aren’t cheap and I’m sure I’m not the only one who would like to see more of these, thanks again great work 👍🏼

[@ArmyMatt79]

Awesome!!!! Thank you for this video. I'm waiting for my Surge X to get out of NFA Jail, and will definitely get a OBSIDIAN 45 soon too. They are DEFINITELY Rugged!!!!😃

[@Don_Dula]

Thanks for the video I got mine yesterday but can’t find any muzzle devices that are in stock. Can’t wait till I can and actually use my can

[@joshuaciminello1503]

Thank you! Just got mine in. Cant wait to get it all set up! Very informative.

[@Ruggedsuppressors]

Thank you!

[@hesa3656]

Thank You Sir! I was reading the website, but this demonstration was great! 👍🇺🇲

[@Ruggedsuppressors]

Glad it was helpful!

[@_Kommissar_]

@@Ruggedsuppressors If I put a Rugged Universal Mount (R.U.M.) Stainless Steel, on my suppressor do I have to use one of the Rugged suppressor muzzle brakes for it to lock correctly or can I use my JMAC - MDI-CO 360HD 5/8-24 - HUB

[@ChristianGrest]

Hopefully my next Rugged can will be the Alaskan. Such a nice can with versatile options.

[@Ruggedsuppressors]

It's a great option!

[@BafflingBS]

Nice of you guys finally putting a video out, explaining this 😂 I think my video’s better! J/K 🤭

[@RT2Do]

I just had 2 Form4's clear ATF in less than 28 hours of being submitted. Surge-X and an Obsidian 45!

[@x3dominator28]

Very nice! Mine were 1 and 3 days in late April. Currently working on paper form 4’s to transfer them from individual to my trust. Sucks paying an extra $200 per can to get them faster….but I’m here for it with Biden bucks, they ain’t worth shit anyway.

[@Ruggedsuppressors]

That's awesome! What are you planning to run them on?

[@RT2Do]

The Surge X will be dedicated to a Savage 110 Precision Elite 6.5 Creedmoor. The Obsidian 45 will be moving around from an AR 15 in 450 BM, AR 15 350 Legend, and a Glock 19.

[@enkrypt3d]

which mount for kriss vector 45 which is M16x1 LH for the obsidian 45? Can't find much online.....

[@tonberryhugs6435]

10:25 so is the booster system piece sold on your website? I dont see it. Maybe it needs its own video as well.

[@Ruggedsuppressors]

Yes, it comes with our Universal Cage ruggedsuppressors.com/product/universalcage/

[@topdog250]

At 4:45 he uses a 3/4" socket. I don't have a RUM mount but for direct thread mounts, which only offer flats, not a proper socket face, a 7/8" socket will do.

[@golfnguns443]

Is there an option for the obsidian 9? I switch between my pistol and 300 blackout often.

[@GaryMcNeillie]

You can get the Obsidian Dual Taper Mount for your 300 BLK.

[@wandering_gnome2868]

One thing that was never mentioned on this video. Is the piston that comes with or you have to buy separate for the universal cage to mount on a pistol?

[@Ruggedsuppressors]

Good question, a piston is not included. We weren't sure exactly which piston customers would like or if they already would own one, so we decided not to include one in order to lower the price and not have anyone purchase something they don't need.

[@_Kommissar_]

If I put a Rugged Universal Mount (R.U.M.) Stainless Steel, on my suppressor do I have to use one of the Rugged suppressor muzzle brakes for it to lock correctly or can I use my JMAC - MDI-CO 360HD 5/8-24 - HUB

[@Ruggedsuppressors]

The Rugged Universal Mount is designed for our proprietary quick detach Dual Taper Locking System so you would need one of our muzzle devices with it. If you wanted to use the JMAC mount, it would thread directly into the suppressor and work like our Universal Direct Thread Mounts. ruggedsuppressors.com/product/universal-direct-thread-mount/

[@jamesevans6188]

Will the universal cage fit the Obsidian 9?

[@Ruggedsuppressors]

It only fits the Alaskan series

[@equalleftrights3130]

Do you torque the Direct Thread mount to 25 ft/lbs as well?

[@Ruggedsuppressors]

Yes, we recommend torquing all of our universal mounts to 25 ft/lbs

[@equalleftrights3130]

@@Ruggedsuppressors Thanks.

[@stozer22]

Will a TI direct thread 1/2x28 ever be available? Same with a TI end cap for 5.56?

[@Ruggedsuppressors]

We can pass your request along to the R&D and manufacturing team!

[@2A_LEGOS]

I am currently waiting on mine. If I am trying to put this on a 9mm PCC with a fixed threaded barrel... Could I use the universal direct thread mount to mount it on the PCC?

[@aribpm]

Yes, but get the universal cage, piston , and fixed barrel spacer for more versatility. I hear this is the way to go.

[@2A_LEGOS]

⁠@@aribpmI see, I will do that then so I don't mess anything up

[@Ruggedsuppressors]

You could do a Universal Direct Thread Mount or Universal Cage and use a piston with a Fixed Barrel Spacer, however it will cost more to do it that way since you have to get 3 parts as opposed to one. Another popular option is to use a 3 lug which will be the fastest attachment method. You would need a 3 Lug Adapter (male part that goes on your PCC), 3 Lug Mount (female part) and Universal Cage to do that.

[@kurtiswhodat8478]

I own a rugged razor 762. Are these mounting options compatible with it? For instance is there a mount to run on a 9mm pdw or carbine? Tri lug?

[@williamgerber9518]

9mm will not go through a .30 cal can without damaging the suppressor

[@radicalraz]

Not true

[@Ruggedsuppressors]

They are not compatible, however the Razor762 does use the same Dual Taper Mounts as the R.U.M. The aperture on the Razor762 is too small for 9mm.

[@LsxHillbilly]

If only the 3port muzzle devices were in stock litterly anywhere

[@monocogenit1]

I bought the micro 30, and have been fairly unhappy with the QD mount. No matter how much I tighten the can onto the mount on the rifle, it tend to loosen up after about 30-50 rounds of shooting. Kinda sucks, since there is no other mounting solution and I'm kinda stuck with it since it's a NFA item. Any advice? It has the dual taper. Maybe you guys could update the design. those two little pivoting arms are kinda hokey.

[@Ruggedsuppressors]

You should not have any issues with the can coming loose especially after 30-50 rounds. We'll do demonstrations/testing shooting all day long on various rifles/machine guns including the M240 without them coming loose. If you can send an email to [e-mail] or give us a call 864-810-0513 we'll get you taken care of.

[@ahrentrevino9981]

Myself and others have noticed the locking system binds up right before its fully tightened. If you use a strap wrench to push it over that little extra friction you can be sure it won't back off. With time it wears and gets easier to do.

[@derekhinger1343]

@@Ruggedsuppressors👏🫡 just sold me, good work

[@pilotbravo5303]

With the RUM that comes with the standard Alaskan. How many degrees am i supposed to turn the lock to know that it’s locked. Also is it normal for the suppressor to be loosen by hand off the muzzle when the collar is in locked position? It’s my 3rd suppressor & first rugged. I love it so far. Just need to understand the rugged RUM system better.

[@brokenforks]

To go from fully unlocked to fully locked the collar rotates 1/2 turn. If the collar isn't rotating smoothly try some permatex high-temp anti-seize on the inside of the collar that should help smooth it up, that worked best for me and won't burn off since it's good up to 1600f. The locking system is enough to keep the can from unthreading by itself (big emphasis on by itself) but yeah if you grab it and try to unthread it while the collar is locked you can unthread it enough to un-lock the front taper and maybe a little bit more but then it will stop. Basically with the collar locked it's not going to walk off even if the front taper gets broken loose for some reason. Hope that helps!

[@Ruggedsuppressors]

It's about a half turn, as long as No Go is covered up when the suppressor is attached you're good to go. The Dual Taper System utilizes a friction lock, so it is possible to manually twist the suppressor when it's lock, however it should not unthread while firing.

[@chadburson7602]

😵‍💫

[@romanshevy257]

So I bought the 360 Alaskan suppressor and just got it from its mail but now I’m supposed to buy the additional mounting systems? I just bought the qd mount $100 !!!!! And that’s for one rifle and now I’m supposed to buy more stuff so it can switch between various rifles and pistols ? Not very impressed quite honestly. It should have came with the cage and one qd mount at least.

[@Ruggedsuppressors]

The Alaskan360 comes with a $249 universal mount. There are so many calibers and platforms to cover, we feel that including a mount would be most always the one the customer didn't need/want.

[@romanshevy257]

@@Ruggedsuppressors what minute marker is that universal mount? I might not have been given that from the dealer.

[@Ruggedsuppressors]

@@romanshevy257 It is the one he's talking about at :49. That comes with the Alaskan360. The Alaskan360Ti comes with a direct thread.

[@BafflingBS]

Register your can with rugged. Once you’re on the paragon program, you can get muzzle devices, for as little as $20 some dollars.

[@pootinhammer]

register your can before you buy muzzle devices. after you register you can buy 4 muzzle brakes for 100 directly from rugged. I also wish I had known this sooner as I bought some full price muzzle devices before I realized they had the paragon program.