Running 9.5" Squared Wheels on a BMW F30 // TIGHT FITMENT

Today on JD Cars I’ll be covering my VMR V801 9.5” squared wheel setup that I’ve been running on my BMW F30. Typically, one would run a staggered setup on this car (being rear wheel drive) but I opted for a squared setup (all the same size). This is definitely doable on the F30 but it is also definitely a VERY tight fit. This can be minimized by rolling your fenders and installing wheel spacers (I’ve made tutorial videos about both). Thanks for watching. Please like and subscribe for more BMW content!
---------------------------------------------------
🔥 JD Cars Site -- www.jd-cars.com
---------------------------------------------------
Veepeak OBD2 Bluetooth Scanner -- amzn.to/37y1o3K
---------------------------------------------------
Instagram: @jd.cars
---------------------------------------------------
Facebook: / jdcarsautomotive
---------------------------------------------------
📷 Camera Equipment
◆Primary Camera: Panasonic GH5 (Bundle) -- amzn.to/386Cpog
◆Secondary Camera: Panasonic G85 Bundle -- amzn.to/2GsQPqa
◆DJI Mavic Pro - Standard Package -- amzn.to/2RLPGOY
◆DJI Mavic Pro - Fly More Package -- amzn.to/2D3YMyz
◆Magnus VT-300 Video Tripod with Fluid Head -- amzn.to/2LiFojF
◆GVM LED Camera Light -- amzn.to/2Qxzelz
◆GVM Motorized Camera Slider -- amzn.to/2GgKpZF
---------------------------------------------------
🎵 Music:
◆ Julian Avila - Old Skool
◆ Hurley Mower - Retro
◆ Dj Quads - Every Moring

[@andrejspotapovs4046]

Thank You! I was wont to bay 9J ET40 to front, but now I know that I can't do this.

[@JDCarsChannel]

Happy to help!

[@tyleraidie4176]

on my e90 I have m220 m3 wheels. They are 8.5 and 9.5. I was rubbing in the rear because my shocks were dead, but I got new bilsteins and now it’s fine.

[@omarrahimi8677]

What was the tire size on the square set up ? Not the 666m wheels , the other

[@pedecia]

Hi JD Cars, needs some help please as I am desperate with my 2012 F30 328i. I disconnected the battery when I went overseas. Came back and connected the battery back and now all is dead. The only things that work are the electric seats, comes the BMW logo on the dashboard and the positioning lights. All the rest is all dead. The car is in my garage unable to start, the BMW dealer wants me to tow the car in and wants 300AUD/hr plus 200AUD for the tow. I would be happy to pay if there was a security to have the car fixed but I am worry the tech would not be able to connect to the car onboard computer to access the faults like in your case.... What would you recommend? The battery is fully charged as I used a CTEK charger... I was thinking in buying an icarsoft CR Pro to check if I could connect to the car CPU... Any advice is welcomed!!

[@recklezz_9738]

Would spacers help?

[@DBaddis]

You get lower offset would like ET25 would have more Clearance for the shocks

[@Wqs.youtube]

Quick question...I have an F30 335i m sport with stock 19" wheels...I believe 8 inch wide in front, 8.5 inch on back. Would you say downsizing to 18" 8.5 square setup would work? I want to keep tires as wide as possible but I know I probably can't run 255s on the front. What do you think?

[@marcalfredmaligalig2594]

Did you try to run 255 in front?

[@PistonPerspective]

I’m looking to get 19x8.5 et35 square setup, with 255/35/19 tires. Should be fine I think right?

[@PistonPerspective]

2016 f32 435xi

[@sebastianjungle]

do u think putting on 666m on f30 20inches will be too much or okey

[@JDCarsChannel]

Totally up to you! I've seen people run up to a 22inch wheel on the F30, but that looks goofy in my opinion. 20inch looks good!

[@globalchi]

I don’t really know anything about rims honestly but would 18x9.5 / +25 offset fit fine on an F30?

[@JDCarsChannel]

I can't say for sure, but it's somewhat unlikely they would fit without spacers as two different size spacers (front & rear) were required for this setup.

[@jamespogo7478]

I got 4 19inch 9.5J with ET35 for my F34, I hope there will be enough space for the front rims instead of using spacers.

[@JDCarsChannel]

Hope it worked out, Jimmy! Good fitment now?

[@pedroramos3389]

Jimmy I’m interested in knowing if it worked out , I’m currently in the same boat , I bought a set of BBS CH rears , trying to decide the size for the front

[@jamespogo7478]

@@pedroramos3389 I wouls highly rocommand to go 8.5 or 9 for front. There are space but it is really limited and depend on which tires you use. I need spacer for PS4s but not for my winter pirelli tires.

[@SlumptDrew]

So I’m going for a square set up with 18x9.5 but want a bit wider tires say 265 or 275 ! Do you think I can pull it off ! I don’t Want to run a spacer

[@ganuv]

Nope , not in the front

[@4x4forlyfe]

What's the offset on the 9.5" wheels?

[@Bemaritohtori]

10:28

[@steaminbimmin2594]

I have 19x9.5 squared with +38 offset, would that give it a little more clearance up front?

[@JDCarsChannel]

Yeah that should give you slightly more clearance

[@MrShocker220]

38 would give you less clearance up front.

[@AltClover2]

I’m looking at 19x9.5 +22 APEX rims. Would this fit on my xdrive f30 335 with m sport brakes? I also need tires for this set up so do you know what would be good for this?

[@howlszn4937]

did you end up doing it?

[@AltClover2]

@@howlszn4937 unfortunately not, 9.5” squared minimum tire size recommended is a 245 tire and since I have warranty I can’t change my fronts to 245 wheel size. :/

[@howlszn4937]

@@AltClover2 im looking at some esr cs15 and really want 9.5 squared do you think it would fit? i have read so many forums and people have done jt but theres always someone saying its impossible

[@AltClover2]

@@howlszn4937 It might. I saw a bunch of videos where it did work but then there were some videos where 9.5 was hitting the front struts and causing them to rotate and mess up while driving.

[@ToviTMT]

Do you have a link for those rims?

[@JDCarsChannel]

I don't have a link at the moment, but they're VMR V801

[@alexinadon7999]

Aytt so if I understand correctly, logicaly my four set of 18 x 9.5 with (+30 offset) rims on my 328i 2013 should not rub on anything cuz with a +30 offset my wheel is more sticking out that inside like you in the video. Anyone that know the real answer?

[@howlszn4937]

r you running 18 x 9.5s squared?

[@alexinadon7999]

@@howlszn4937 not currently cuz I'm in winter (snow) I would like to run yes 18x9.5 square wheels for my summer setup, they will probably need to be stretch to fit. But still don't know if it rub. So I didn't sell them yet.

[@JDCarsChannel]

Hope the video helped! Did you get your ideal wheel setup dialed in?

[@DrMelInvests]

Painted calipers in your future I hope? Even if just all black to keep with the theme.

[@JDCarsChannel]

Absolutely!

[@elkevin5888]

spacers?

[@JDCarsChannel]

Yes

[@matthewa4621]

What’s offset

[@JDCarsChannel]

ET35 offset

[@eshay6161]

Didn’t even show the after install properly

[@michaelmontalvo7441]

bruh that house though lol that’s how he can afford a lift in his garage haha

[@ganuv]

You don’t put 9.5 in the front you need 8.5 front 9.5 rear with 275/35 245/40, otherwise you’ll destroy your diff