Running a Tumbler for 1 WEEK

Check out our DIY Build Kits: bit.ly/2NnXiVp
Today we're taking a tumbler and letting it run for a whole week to see what it does to the things inside.
Check out the TKOR Shop: bit.ly/2UCNpEb
See What Else We're Up To:
TKOR Instagram: bit.ly/2Ihef1j
TKOR Facebook: bit.ly/2Kl2zgr
TKOR Pinterest: bit.ly/2InY0iT
Send Us Some Mail:
TKOR
63 East 11400 S # 198
Sandy, UT 84070-6705
Business Inquiries: For sponsorship requests or business opportunities please contact us directly: bit.ly/2VwFw3x
Music by:
Coma Svensson - "When The World Crashes Down (Instrumental Version)"
Anders Bothén - "Dinner Party 01"
The New Fools - "Chasing the Beat"
Royalty Free Music from Epidemic Sound: bit.ly/2YZS8SH
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
✌️👑 RANDOM NATION: TRANSLATE this video and you'll GET CREDIT! Click Here: bit.ly/329RItX
Want credit TRANSLATING other videos? Click Here to see where else you can contribute: bit.ly/2UFOm1O
This video is dedicated to our friend and founder Grant Thompson- the one and only King of Random. Click here to to see our tribute to him: bit.ly/2MwG5bN
THANK YOU!! ✌️👑
#tkor #thekingofrandom

[@Alan-cm6tn]

10:57 Calli: look at this coated ring Nate: * looks away*

[@tylerthesongmaker746]

Dont you look at my comment like that patrick

[@phrorge]

@@tylerthesongmaker746 😂😂😂

[@suoppsdn9751]

He's looking at the screen where the time was edited and was showing the ring while she was suppose to be holding it. It was edited

[@judahbrewster]

Put liquid silicone in a tumbler and have it run while the silicone sets and see what it does!

[@elliedavies8743]

Judah Brewster yes yes yes

[@GlitchedRed]

Judah Brewster That's a long way of saying "Ruin an expensive piece of equipment".

[@MP-rj1qp]

He’s dead

[@rossdiver6411]

Just saying but don't recommend stuff he's dead

[@seth_fto]

Challenge Time! 29 who dead

[@ugon.1211]

Use black surgical gloves for years, doesn't use when holding doubtful stuff.

[@TheRijkehabbo]

Aint the same dude my dude

[@-flutterby7026]

@@TheRijkehabbo most mericans look the same, its the line breeding

[@youngboyscousin2685]

- Flutterby wack

[@dogleghobag]

i would be in a dust mask opening that tbh. all those strange chemical coatings.. uhhhhh???

[@DR3_34D]

Ye

[@DryRoastedNutz]

Can you re-do this experiment and actually follow the directions for the Tumbler?

[@Bathrezz1]

Lol rekt

[@sosanuts7665]

He’s dead

[@evanslater1255]

Josephield Nate isnt

[@LutzDerLurch]

like? I only have some limited experience with huge industrial versions, which also run with water.

[@doctorsuave]

Evan Slater savage

[@szymongizicki4537]

I think it would be really cool if u try to make diy sea glass edit : I just thought u guys could also use ur forge to smelt glass with some weird colors and then tumble it so it's smooth and she what cool things come out

[@atomicpotato4468]

Cool that be cool

[@Timochat_]

Step 1 : Drop glass in salt water Step 2 : Stir until desired results are obtained Step 3 : Profit

[@Matthew-fw2lh]

3:43 - 3:45 They just said that

[@PheonixLove]

I think they did a video like that before... But I'm not sure

[@GOAT_GOATERSON]

What is sea glass?

[@mariacoan3979]

You should try experimenting on mood rings, the ones that change colour "depending on your mood". I would reccomend putting them in a vacuum, smashing or opening them, and then put whatever's inside them in the vacuum chamber too.

[@ziocrielo6148]

Maria The Unicorn They are actually not mood rings but temperature rings. Stick one in the freezer and one in the stove on low and see the change

[@stephenlee306]

@@ziocrielo6148 I think they know, considering the quotation marks around "depending on your mood." Just calling them by their name.

[@richardmillhousenixon]

It's a solid piece of resin/lexan/some random plastic fused with a temperature sensitive pigment. Not that interesting sadly.

[@aesthetic_dude795]

Maria The Unicorn I agree : D

[@mariacoan3979]

@@richardmillhousenixon yes but it would still be fun to experiment with

[@robertpearson9207]

You put too much stuff in the tumbler. The pop can was a definite hindrance to the tumbling media working as it should.

[@renzzzz24]

robert pearson SODA not POP Sorry I had to do it

[@anthonym9626]

@@renzzzz24 boi it isn't soda or pop, both are correct

[@renzzzz24]

Anthony M I know america is weird

[@MiraDaWulf]

*soda

[@100videosandnosubscribers3]

And the sugar didn't help

[@jackgrotelueschen5477]

What happens if you put oobleck in a tumbler? Does it stay solid for a whole week?

[@JediSentinal]

i bet it would dry out

[@burp2019]

it'd probably dry out in the first few days

[@DEXTEROO250]

Do not try that it can destroy your tumbler and that's like a $250 mistake

[@ThatsaToilet]

@@DEXTEROO250 how u know?

[@GetBonked]

@@ThatsaToilet because it isn't hard to look up a tumblers prices. He isn't wrong

[@dawnofjustice4689]

Nate should try to build a "Box of Silence". Were you can put stuff like that shaker in... and hear nothing on the outside. Could be a nice challenge. Would love to see that 😄 I bet the maker of a Camping Cinema can do it 👍

[@Adam-rt1lc]

you mean a sound proof box?

[@timothyneiswander3151]

No, they mean a Cone of Silence. (see Get Smart tv series)

[@dawnofjustice4689]

Sorry, my English is not the best. I simply mean a box, that don't let out any sound. inside: loud outside: silent

[@Adam-rt1lc]

Timothy Neiswander no he doesn’t lol

[@arctifoxdrew4362]

Great job carrying on grants legacy! Thank you Nate and Cali

[@samuelkleinsanchez8075]

Cooolllll

[@jpramsey1624]

Amen

[@Lazarus_]

Smh

[@VainIOS]

Bruh who asked, just get over it

[@nathanmead140]

@@VainIOS 😏🤛

[@TrueRueTube]

Use cobmeal (wear a particle mask when using and opening the tumbler container), also try sand ( I have some white sand from Florida if you would like me to send it to you)

[@alyssawhitehead4196]

I’ve been to Florida and I miss it so much

[@reubenhickman7177]

I know it’s not the size of a coin but try putting plastic, glass and gorilla glass screen protectors and compare how resistant they are

[@BrandonJPearce]

Ooohhh yes!

[@JG_Fit]

Agree

[@sergeantneko]

Guerrilla glass* (sorry)

[@seanhampson4126]

Walk around your neighborhood and find random interesting looking rocks and tumble them showing daily progress! That'd be cool!

[@endercreepermia]

Hey King of Random Team, Can you please make Lego using different types of Metal and see which ones well with actual Lego.

[@bobateacuber7646]

Before you speak, ask yourself: Is it true? Is it kind? *_aNd IS iT NeCEsSarY?_*

[@elmong9124]

Parka0M's Cubing Thingymabobs He’s just probably a kid , clam down

[@ZA-mb5di]

@@elmong9124 that doesn't help the heathen

[@netts2315]

@@bobateacuber7646 So you're saying every single video they have done has been "NeCEsSarY"?

[@poppygloria9166]

Endercreeper Mia no

[@GF_Burke]

Use walnut shells. Use locktite on the nut. Put range brass in it.... what it's designed for.

[@mamodokod4613]

8:46 they actually start looking at the stuff

[@CroomTM]

You should use water in the tumbler to deal with all the friction heat

[@ghfanish]

I have a huge one at my work, we use water too

[@thehipmyster]

@@ghfanish where do you work

[@ghfanish]

@@thehipmyster at a welding company, we use those machines to remove the sharp edges from metal plates

[@ck9199]

We use water too when we tumble parts

[@gregbrightwell662]

There are tumbling liquids that aid in tumbling available. Ive used a large set up that would have made the glass into sea glass in a day or 2. Ive also used machines that had just common gravel as an abrasive.

[@sleepdebt5523]

Me: leaves a piece of stone in tumbler for a year **Opens it after a year** Me: wHeRE dId iT Go?

[@PelegdolevWackyycool]

Tumblr is crazy

[@chibichabot9293]

Flagged for NSFW content and taken down

[@nathanpfirman625]

Lemem geuss u used a rock tumbler not a tumbler

[@Spectt84]

If you want something to run for a week straight, avoid buying it from Harbor Freight.

[@Ferotiq]

Spectt lmfao

[@chasea.721]

Ya-Boi-Insanity has

[@Ferotiq]

Chase A. What?

[@auzzie671]

Ya-Boi-Insanity has

[@jaryn6552]

Ya-Boi-Insanity has

[@pokmonx]

Had a mini heart attack when she rubbed the edge of the glass lol

[@jenniferha9354]

Me too I thought she was going to cut

[@Rai.0-]

Try making your own sand with real shells and compare it to beach sand please

[@elprior3753]

@Sub2me pls I reported that repulsive comment

[@galactichedgehog4352]

@@elprior3753 what did the comment say?

[@eggroll3055]

Sand is actually made of quartz, not shells.

[@viviantinjum8190]

@@elprior3753 what did it say...?

[@OtakuTemmie]

@@elprior3753 what happened..?

[@GavinDennyGlitchyDenny]

"when did we do it last week, Wednesday, or thursday?" "..." "..." "We did this tuesday...."

[@michelinthefreeser6816]

first lmao xd OOF OFF

[@tykdreng4202]

I ran a tumblr for one week, and all i got was suicidial thoughts 🙃

[@ace4luke]

Jacob Andersson this needs more likes

[@dummythicchorse350]

OOF

[@sunnyhuang4521]

This is a very punny pun.

[@jdddff]

*-ME TO-*

[@diamondfox_w9008]

oof

[@corey2477]

if you want shiny use corn cob media. maybe walnut for harder materials

[@BillyBob-xp5yl]

After the intro Calli always starts with “Nate”

[@incognitomode5052]

In the most condescending tone ever.

[@shockwaverc1369]

Nate ?

[@ravenprincess3243]

Incognito Mode and I love it 😂😂😂

[@joe24ever76]

"I've never used a professional grade tumbler before" Well you still haven't because it came from harbor freight.

[@NormReitzel]

It's a vibratory tumbler. What do you want, stainless steel outer tub, or a union label? Sure. you can pay $400 for a "professional" tumbler and it will perform exactly like the (admittedly cheap) harbor freight unit. And the HF unit won't last as long, but for the difference in price you could buy ten new HF tumblers. I'm all for well built tools, but I believe the term that applies is "gild the lilly."

[@YouTubeCertified]

You’re both right

[@humorlessclown]

Norman Reitzel - What I want, using this vid as an example; a tumbler that doesn’t break the first time you use it?? 🤣🤣. Looks like OP is in the right here.

[@epluribusunum6622]

Lol

[@jerryward6109]

Lmfao

[@ericteipen]

Having reloaded ammo for over 40 years I have to say that walnut shell media works great for polishing brass, coins ect.

[@kilroy4843]

Crushed walnut is also an approved abrasive cleaning method for jet engine internal cleaning.

[@therealsnufkin]

I used to use an industrial version of this. The media was ceramic and we used water with it and a little washing up liquid. Works great: takes off all the hard edges and gives a smooth satin finish.

[@patrickholcomb7402]

I'm not sure if someone stated this already but tumblers like that require some detergent and water to work best. I use to work at the local machine shop in that department.

[@craftymiller681]

I make copper jewelry. I use a drop of dish soap and water.

[@KJ-kw7gh]

Is the water and dish soap something recommended for the media type they're using? I use this machine for dry polishing using a mix of corn cob and walnut shell media. Polishes spent brass well.

[@craftymiller681]

I use a lortone tumbler. It is recommended that you put soap and water with you metal shards.

[@rdizzy1]

@@craftymiller681 Most vibratory tumblers are meant to be dry, they are literally usually called "dry tumblers".

[@stevenrodriguez3763]

I'd say use different media for the tumbling. There is crushed walnut shell and corn cob. Don't overpack it so everything has room to move around.

[@Ceba551]

I almost bought this tumbler. Thanks for this product review.

[@Machtyn]

I would like to see you do those items again, but without the soda can. As you say, weight distribution.

[@christopherray122]

Or the candy?

[@samus25]

Nate: “I’ve done it!” Cali: “what have you done!?”

[@MegaJacques1]

Hi

[@gerstenberger8503]

@@MegaJacques1 hi

[@nekowerewolf9769]

@@gerstenberger8503 high

[@gerstenberger8503]

@@nekowerewolf9769 altitude

[@MegaJacques1]

Hello max subscribers to me and I will subscribe to you

[@coreyserridge774]

fill a tumbler with nothing but coins, no abrasives. JUST COINS!

[@oskarwillardt]

Corey Serridge has Harvard sent you a letter yet because that a genius ideas

[@notchieuwu]

and also try your own abrasives

[@BackcountryForward]

Corey Serridge this is brilliant! Do it!

[@shawnducote6071]

Yes please!!

[@skycraft3670]

just yes

[@RedHatRecords]

Hey so I have the same tumbler. I decided to drill a hole through a beer bottle cap and put it over a washer under the wing nut. The wing nut had a much better bite on the threaded rod. Also, a much finer aggregate might show better results. Great video, I love this stuff.

[@mybluheavensk1]

Yayyy! Do this again please!!!

[@njlarson99]

Water and soap helps with the polishing of the items you put in the tumbler.

[@ramdaftar5180]

Cast something using the furnace and then put it in the tumbler with different abrasive to get it shiny!

[@NicoWagner89]

Blue Loctite probably would have went a long way for you guys

[@kg4boj]

All you need to do is put a second nut on top of the wing nut, and the abrasive media they used was not the right for the task. They should have used walnut media with abrasive polish

[@johnsumner2987]

Red Loctite would have made sure nothing would have came apart.

[@greasyt9400]

@@kg4boj silica bead media would even work better than the weird d4 plastic stuff.

[@fatgandalf8269]

try just putting a hot dog in there and see what happens

[@xenos_n.]

Smooth weiner

[@SapioiT]

I have no problem with putting in a hotdog, hot dog, but why not put a hot cat inside, instead?

[@sequoiaredwood8747]

Fried chicken bits

[@TexasRailfan2008]

100th like!

[@Cloverstang]

I would love to see the team take on alcohol stoves. The different kinds, which ones are useful, easy to build, then cook a dinner from the stoves. Like hamburger helper or something. :)

[@drippingwax]

I want them to take their backyard foundry experience and make a rocket stove.

[@cbarr0288]

Can you polish some things using the tumbler? And you should show microscope view before & after

[@jacobitsme2009]

If i could make a suggestion I feel like cylinder tumblers that are used for polishing stones are the best for being abrasive and really giving results just a thought and as always love the videos.

[@blacksmith67]

I have a DIY tumbler for removing firescale from steel in which I have a bunch of short sheet metal screws (got in a job lot for cheap). It only takes a day to polish everything to a clean bright shine.

[@bozzie3942]

You probably should've put soap and water in with it, I work at a machine shop, maybe that's why the tumbler got destroyed, or maybe just because you overloaded it 🤷🏻

[@rxmclaren7]

i was thinking the same thing...i worked at a machine shop for a summer as a side gig and my job was to retrieve the parts from the tumbler...there was a bar with holes in it that i had to lower that fed a constant flow of water into it...virtually no dust

[@horseshoe_nc]

It is also a Hazzard Freight tumbler.

[@Ericweird]

Machining stuff is fun

[@Ericweird]

I'm gonna make a c clamp and parallel clamps 1st semester 2nd semester I'm making a cannon project. Should be a fun senior yeat

[@coreyms]

I’d like to see what this does to a small piece of different types of wood, and then possibly compare it under the microscope to wood that has been sanded at different grains

[@kimtravers2922]

Ya me too

[@kimtravers2922]

Congratulations on 1 million subscribers

[@seanwilliams2357]

Rotary tumblers are AWESOME... and can be wet tumbled for polishing things beautifully

[@a.c.zocchi986]

9:24 that solved the mystery of my school's cymbals. Countless years of use rendered the threading flat like that. 1 week did that to the machine threading, a 6 years or more did that to the cymbal handles.

[@supraman.91]

So obviously Oobleck is a non-Newtonian fluid and feels like a solid when a force is applied against it but does it Act similar to air sand with vibration is applied to it

[@LavenderBluz]

If I know enough itll probably just firm up and shake cause the vibrations are so fast

[@D.R.O.N]

Search up Liquefaction of sand.... It is the phenomena at play here.. Basically when a vibration like force is applied to sand it turns into liqud i.e. It loses it shear strength (ability to hold up along a surface). In nature this can be observed when we experience earthquake any structure with a sandy foundation fails easily... Also quick sand pits

[@nidakashif05]

Mark Robers video on it may be of some help

[@Dkzdream]

Matthew Baker nice s14 and I see you’re in to mk3’s ;)

[@supraman.91]

@@Dkzdream yes sir several Mk3's and a handful of S14 sand 1 s13 vert and 2 RX8

[@thefishdoctor6058]

Cali: “I have no fear of getting cut” Looks at her finger to see of she got cut

[@carpenoctem3257]

TheFishDoctor Even if you’re not afraid to get cut, it’s still natural to look to see if you did.

[@seth_fto]

Carpe Noctem ik

[@AOTLTng]

@@carpenoctem3257 yes

[@dominikklein4282]

Try one of those spinning barrels with sand in it and put similar items (espacially glas) [You could build your own even]

[@loeysmob]

I think glass ends up smooth like you find on the beach. I would love to see if you can smooth out the surface of quartz rough cut crystals, or even some screws. Though trying different types of tumble stone/abrasive would be awesome to.

[@SammyShao]

No one: TKOR: Let’s grind some coins US Government: yoU aRe RuiNinG tHe eConOmy

[@shockwaverc1369]

actually its making it better

[@wex1577]

HAHAHAHHAHAHA

[@lethargic.]

@@wex1577 A LUL IANCE

[@Mr.Birb-]

Just break the pennies

[@molag-ballordofdomination2065]

Isn't destroying currency for educational purposes ok?

[@adventureridergirl]

I use corncob media and liquid metal polish together in my tumbler (I use my tumbler for polishing brass for reloading ammo), I think the media y'all used wasn't appropriate for the stuff you were polishing.

[@a2112drummer]

I totally agree. Also it's from harbor freight so maybe a better tumbler.

[@adventuregaming7041]

@@a2112drummer, Yeah, I have a Frankford Arsenal tumbler that works great (and I've had it for like 5 years now) and isn't anywhere near as loud as they were making that Harbor Freight one out to be.

[@MrSanteeclaus]

Yes agree had too much stuff in it . Any one tried baking soda for media?

[@michaelsorrell601]

You have a fine polishing compound for polishing cases for reloading ammunition

[@michaelsorrell601]

Liquid polish and pecan hulls or corncobs.

[@johnbrown8059]

I have several vibratory tumblers I use for cleaning ammunition brass. I used to have issues with the tumblers "walking" across the garage floor while they were running. I tried putting the tumblers on different things to fix the issue with no luck until I tried some pieces of used linoleum flooring. I cut them down so the tumblers would fit on them and put the "slick" side down and the rough side up, which is opposite of what you do when you install the flooring... Worked like a charm! I can leave my tumblers running for hours and they don't budge at all. I got the idea from the flooring guys who installed my laminate flooring. They put linoleum down on the concrete floor first to act as a slip pad and they laid it down on the slick side with the rough side facing up. That way the laminate flooring would "float" over the rough side, so to speak.

[@rcfun42]

When I do my fireworks I use a rotary tumbler with lead shot due to I tumble some chems. for several days at a time and use a small fan to keep tumbler cool for those long runs has done well so far

[@user-jx1fd4sz9n]

What if you guys polish something made with the mini metal foundry ???

[@bmccann601]

I used to do this kind of stuff for a job. To help cut down on the dust put water in the tumbler along with 1 drop of dish soap

[@DanteNava]

How about some 3D printed items made from different materials, PLA, ABS, PTU...

[@stevemichaels7038]

When you get a tumbler and dont read the instructions

[@LutzDerLurch]

Not familiar with these small tumblers, so, can you give the main points?

[@torchic3069]

Cast Tetris pieces and play gummy tetris

[@adamhenry6793]

Yay!

[@Jack-qm7xd]

FlamingTorchic 14 Years Ago osjdiwiduwjd

[@pianoguy9300]

Can you do it?

[@nobodyhehe1883]

14 years

[@mrducc6532]

FlamingTorchic 14 Years Ago YEET YEET YEET YEET YEET YEET YEET

[@BigDraco21]

If you had to freeze dry orbeez would they be restored to their original size ?

[@darkserpent_]

No

[@McPlaySpot]

Water expands when frozen. Freeze dried or not , it'd expand and leave the orbee cracked.

[@alextheaxolotl3031]

gabriel petkov what would possibly be closer to your desired effect would be an orbeez in a dehumidifier

[@applesong01]

Dehydrate orbies

[@sootlet8894]

they already put orbeez in their freeze drier, it wasn't that exciting

[@daltonjohnson1642]

Put a rusted piece of metal in and see if the tumbler removes the rust

[@sams9716]

Get a glass bead tumbler. We had one of those at where I used to work and it was amazing.

[@victoryoreo9447]

guys you should try some stuff with police tape. like: make a rope with it freeze it in liquid nitrogen and check if it shatters burn it melt it????

[@raeganfritts2299]

Victory Oreo that sound rly cool!

[@LordDragox412]

Yeah! They should also light matches on *FIRE!* Now that would be something crazy!

[@keahibailey2646]

@@LordDragox412 dude, chill. Those are actually cool ideas. Like, I get the sarcasm, but I think that seeing if it would shatter, or be a rope is a pretty cool idea.

[@kay88805]

Keahi Bailey its literally just plastic... -_-

[@victoryoreo9447]

@@kay88805 yes it is plastic, but it is made with tear proof plastics, that would make an interesting rope

[@RavenChopper]

When I first read it I thought it said "We broke Tumblr."

[@axolotl0424]

I was gonna say that they're both the only one who broke their Tumbl(e)r

[@shutg6075]

same

[@SneeryRoom9]

Same

[@ayeuplink1428]

Same

[@v3rmilli0n_stxrs222]

Same

[@amysaurhuish300]

Please do more tumbler videos with all the advise and suggestions people have commented. I feel like you could make a series of this! Just putting things into different tumblers

[@MasatoKay]

I'd like to see if 3D printed parts will get polished

[@danieleasley9616]

No it dosen't i Tried and it broke the project i was working on and Spend 7 hours printing a new pice

[@carlislencarrington]

Use isopropyl alcohol on pla and acetone on abs

[@convexchart4930]

Daniel Easley Really it worked when I used I used (PLS) filament did you use pla

[@danieleasley9616]

@@convexchart4930 ya i was using pla

[@WencyLoinaz]

You may be able to use the broken tumbler base as a bubble remover (shaker)for molds!

[@sanstheskeleton2159]

I AM SO EARLY AND HAVE NOTHING TO SAY thanks for coming to my ted talk.

[@camb381]

Stfu

[@xavierridenour8948]

@@camb381 fuc off man. He didnt do nothin to u.

[@Mustaali1]

AHAHAHHAHAHAHA SO FUNNY, GUYS CHECK THIS OUT

[@jolielambert1208]

same 😂😂

[@glockbaby4674]

CamB uno reverse card

[@operator1192]

You guys should try a stainless media tumbler. I use that on brass and it seems to do a better job than other media tumblers. But it’s a rotary tumbler. You might get some cool results since the media is harder but still polished nicely.

[@tman6882]

can you take cookie dough from chocolate chip cookie dough ice cream and bake it to see if it's actual cookie dough.

[@jamiegreenham4140]

Sorry to break it to you... it's not normal cookie m dough

[@itzasicklegend8740]

GD Tman cookie dough has raw eggs in it and people are not supposed to eat it because it risks getting salmonella. Raw eggs are a main ingredient in a cookie baking properly so the cookie dough in icecream doesn’t have the core components that are required for cookies to be baked

[@jamiegreenham4140]

@@itzasicklegend8740 people can eat raw eggs .... I assume you've never heard of mayonnaise... or drinking egg straight

[@jamiegreenham4140]

@@itzasicklegend8740 barely any eggs actually contain salmonella bacteria its like 1 in 10,000

[@vizualzz1184]

If it was actual cookie dough you would get salmonella

[@m2pt5]

nail file scissors knife hard drive platters a nokia 3310

[@Roo2live]

The nokia'll survive

[@rainthefurry7961]

@@Roo2live there's no point, a nokia can survive a driect impact from 20 nukes

[@HerasFallenHero]

Emtu lol

[@pyrosmoak53]

The Nokia will look brand new if anything happens at all

[@tejalsoni]

@@rainthefurry7961 😂😂😂LOL HEHE

[@McDouglyMcDuck]

When polishing metal in a tumbler, I always use BBs and I toss in a few screws, nuts, etc.....Works great. And the BBs are quiet tumblers.

[@nikolaslialios479]

next time try using ceramic stones to tumble it in. Usually those polish better.

[@filthmaster9936]

Throw a PCB in there of like a phone or other small device.

[@Trickster3009]

Just the pcb or pcb and all the componants

[@stoopidputo1292]

Throwwww

[@filthmaster9936]

@@stoopidputo1292 OH noooo a spelling mistake 😱 it's not my native language so who cares.

[@achaoticneutralpaladin7713]

@@filthmaster9936 oof i cant spell and this is my native language so i wansnt gonna correct u but who cares about spelling anymore

[@ck9199]

Looks like you forgot water and a drop of soap

[@ethans4783]

these tumblers are built to be ran dry, especially with the resin medium :)

[@ck9199]

@@ethans4783I would never use resin media when dry tumbling because of the heat. Corn or walnut is for dry tumbling. All other media is best for wet tumbling. Especially resin. Especially is that type of tumbler

[@ck9199]

@@durb1 what would rust? I used to use tumblers all the time. No rust and I always used water

[@vorhese]

@@ck9199 Been using my tumbler for years on motorcycle parts, the triangle media is worthless without liquid (I use simple green). And mine is pretty dry and caked after 24 hours, gotta keep it wet.

[@jcruz821]

You guys could try and put in rocks that are typically in the Moh's Hardness Scale. That would probably tell you up to what hardness that tumbler would work on.

[@jennrorabaugh6897]

You guys are so cool

[@mikster97]

I wanna see a phone, cups of different materials (plastic, glass, ceramic, metal) and even the same materials in the video but with different abrasives!!

[@rilka3632]

try one of your bouncy balls that u made, it might break down though. A tidepod in one layer of duc tape

[@stocktonnash]

Great video

[@funkworthrollin4959]

Cause I wanted to see this. Thanks rec.

[@elburropeligroso4689]

Try using stainless steel tumbling media, then corn cob media, and then rouge to see how they perform. Finally, mix all 3 media together to see how they polish.

[@rosebearcat]

I want to see what happens if a meteorite ring goes into a Tumbler

[@ambermiller2496]

I would love to see y'all put various woods in there to see what happens! Please!

[@ericnobbs1754]

I'd like to see you try the tumbler with straight up sand as the polish medium.

[@WhiteDwarfVR4]

"I have never used a professional grade Tumbler before"… you still haven't, Harbor freight tools are hardly professional grade.

[@log_by_bolb]

nice, 69 likes. *NICE*

[@ignatiusarchambault1049]

@@log_by_bolb 96 likes, nice

[@log_by_bolb]

@@ignatiusarchambault1049 yes

[@ErikOosterwal]

Tumble things that have completely rusted, like bolts, padlocks, hammer heads, ax heads, etc.

[@roadsideprophet2012]

IDK about abrasive but corn cob and crushed walnut shell media is fantastic for polishing. Those are the standard for polishing brass cases for reloading ammunition

[@galaxycube1016]

Electrical Bill the week before: Affordable Electrical Bill a week later: “Men we have a power breach, we need to shut off power to the whole city”

[@nathanpfirman625]

Why would it be so much

[@samlowther9487]

I think it would be cool to see some Lego minifigures and Lego bricks put in there.

[@joeschratz9360]

I totally agree

[@dawnsherratt2317]

I was going to suggest Lego bricks too lol

[@Azuriiee]

i see you upload every 5am

[@erb2818]

For me it's 5 pm xD

[@yeye1858]

Ella Burgess same

[@jpramsey1624]

Ella Burgess same

[@TheAdam92ea]

I've seen that one well known aftermarket bike parts maker uses something like this to polish dirtbike gearboxes. You should try that 😜

[@shortsweetreviews]

It would be great with the sugary sticks and can and walnut shell polishing media. Some small rusty items and the coins, glass etc

[@jonathanbrumfield2964]

You used the wrong media for Tumbling. Different media for different materials. Glass beads, corncob, walnut etc.

[@jamesmerkel1932]

Exactly this ^

[@mandacole8703]

I came here to leave this comment exactly.

[@justinmcpickle3828]

Empty out a tumbler, fill it with oobleck and try dropping objects of different dencities in

[@incognitomode5052]

^densities

[@bigun89]

Those are typically used to shine and police either brass or rounds of ammunition. I used to reload a lot as a teenager, and the tumblers would run overnight. It's amazing how well they help you sleep.

[@loneczgunner6562]

9mm casings. This style tumbler is usually used by reloaders cleaning their brass. You may have just had more weight in it then it could handle. Usually used with corn cob media or crushed walnut media to clean and polish brass.

[@itsCN]

You never looked at the sugar stick, 😂 probably gone but still