Rust & Paint Removal

[@Adammskii925]

So satisfying to see this done properly with fresh grit

[@Mobileblaster]

😏👌👍

[@philglover2973]

Awesome video Mick thanks for your time and consideration top job 🇬🇧👍🚛

[@Mobileblaster]

Thanks mate appreciate you stopping by to leave a comment I believe it helps the channel out duno how or why, But it's still nice to hear from folk 😊👌👍

[@johnriff85]

I love the creativity behind the drone shot opening. Great editing mate!

[@Mobileblaster]

thanks please come back later and watch it in glorious 4K I had a notification saying it was ok to publish soon as I did error processing is taking longer than usual should be ok in half hour or so :)

[@MKHNitro]

Good video Funny watching you blasting next to a dust suppression unit

[@Mobileblaster]

Thank you. 😅 Yeah I noticed that lol

[@mm2024-7]

Spot on, mate! Great job. I was hoping you would do those bumpers and side panels. They really needed it.

[@Mobileblaster]

@@mm2024-7 thanks I only do what I'm told to do 😊👌👍

[@darkfactory8082]

Ahhh, so relaxing and satisfactory result... I got goosebumps.. 😁

[@Mobileblaster]

🤗🫡😎

[@scottkenzig5144]

A great video Mick 👌👍🇭🇲🇬🇧

[@Mobileblaster]

Made all the better with a gust appearance from a legendary blaster 👌👍🫡🏴󠁧󠁢󠁥󠁮󠁧󠁿🇦🇺

[@scottkenzig5144]

@Mick Blackley SandBlaster cheers mate 👍. Felt privileged 😉😊👌

[@gendacuts3323]

New subcriber here!!! I wanna express my support to this guy because i was a sandblaster before working in Taiwan...

[@Mobileblaster]

😊 welcome to the blast hood or back to the hood 😆👌👍

[@cyberhornthedragon]

do love how it just erases them difficult stickers

[@Mobileblaster]

Alot easier with the blaster than anything else 😂😎

[@davidtyndall8880]

I am not an environmental nut job and I have done some sand blasting but I do understand that a lot of the pulverized paint and plastic that we blast off does wind up in our oceans. I hope, that in time, a suitable capture system will be developed to trap sand blasting debris and either recycle it or properly dispose of it.

[@Mobileblaster]

Yeah would be nice to know all the waste gets recycled again. But unfortunately it would mean building a blast booth every where jobs need doing and that wouldn't be feasible. The media used is recycled and the paint is water based as to minimise environmental damage 👍 its alot better to repair than scrap and rebuild so I would say blasting is still the better option for the environment I duno how to work the co2 out on something like that👍

[@davidtyndall8880]

@@Mobileblaster : I wasn't speaking to you directly but to the industry as a whole. We all, no matter what country we live in, need to figure out how to take better care of this house we all live in.

[@Mobileblaster]

@davidtyndall8880 it's still better to blast and repair than replace the co2 that's involved buying a new truck to replace this wagon would be alot more than repair so I'm all for repair 🫡👌👍

[@auditpundit1199]

Last time I checked there were no oceans near Barnsley. 😃. I do get your point though, eventually the River Dearne may carry some of the waste out to sea. I would say, though, its more down to those manufacturing, painting and coating things to ensure they use environmentally friendly products.

[@jackbauer2698]

It won't.

[@gerrymcglynn7390]

Brilliant, my first time to watch, I enjoyed it, well done 👏 ✔️, from Ireland 🇮🇪

[@Mobileblaster]

Thank you 😊 welcome to the blast hood 👌👍

[@SPEEDYBLASTLTD]

Speedy blast Ltd in Ireland are a similar company, mick does a fantastic job and we love your videos

[@curtismatthew2744]

Love that switch

[@Mobileblaster]

😆😬 I was waiting for the delivery it was on order but jobs couldn't wait 😂

[@captainotto]

It's like you've taken an eraser to the rust, paint, and old decals. Everything just comes right off. I can't even imagine the elbow grease and time it would take to do by hand.

[@Mobileblaster]

Yeah definitely a time saver also leaving the serface

[@Mobileblaster]

Perfect for paint 👍👌

[@x-con-x]

Amazing to watch. I had an interview yesterday for a shot blaster job.. Fingers crossed. This video deserves a sub all day long. Great work. Just going to binge all your videos now ;)

[@Mobileblaster]

😎 Good luck future blast hood brother 🫡 I will admit these videos do make it look easy just keep that in mind 😉 don't take every thing I do as the only way because what works for me may not be what you find easier. So don't get disappointed you will have success if you put the hours in 👌👍

[@x-con-x]

@@Mobileblaster Thanks Mick. I have learned a lot from your videos so will take that knowledge with me. Ill update if I get the job :)

[@olivermelia2777]

Hya grate video how much grit do you use on this kind of job and how much do you charge for a 8 wheeler body we got one that could do with doing ?

[@RandomChanneI]

Very Satisfied to watch

[@Mobileblaster]

😊👌👍

[@muhammadkaggwa6371]

Cheers mate you are doing a wonderful job.

[@Mobileblaster]

Thank you 😊

[@stanspch1]

Watching that was oddly satisfying , I think I need to change my job!. ;))

[@Mobileblaster]

😬😎🫡👍

[@BigChungus-zg6zw]

Love the on-off switch 😅

[@Mobileblaster]

😎

[@marski-vv4qb]

I was just thinking that myself about the switch be carefull young man

[@Mobileblaster]

Yeah totally get its so important to have a good deadmans handle it is on order but in the UK they want 300£ + for a micro switch I just cannot bring myself to spend that on a switch that's 3£ tops it's coming all the way from Australia 🫡👌👍

[@zircontweezers4904]

Splendid achievement, dear sir

[@Mobileblaster]

thank you

[@hicham1101]

Very good job brother

[@Mobileblaster]

Thanks 😊

[@upyaronson]

so relaxing to watch

[@Mobileblaster]

😏👍👌🫡

[@MrBLUEDEVILUK]

You need to wire in an inline switch. Health and safety at the flick of a switch. Or not at the twist of the wires lol. I do however ring your videos fascinating and very satisfying. 😎👍🏻

[@Mobileblaster]

😎👌👍 I had a switch in the post but this job needed to be done before it arrived 👌

[@borisfilinskiy393]

Also, the lightback stickers(not sure about correct naming) we cut down with a paper nife. When applicable.

[@Mobileblaster]

The hi vis Road stuff isn't like any other vinyl it's backed with tin and very delicate once fitted they just won't pull off

[@paulf2529]

That came up well, should look really tidy with paint, the blaster ate those decals, the reflective ones are a pig!

[@Mobileblaster]

I will admit I'm unsure exactly how many times this 1 truck has been blasted by me before but this company have 20 trucks 2016s and I've blasted them every 2 year ish 3 or 4 of the 2016s are left he's just upgraded to 2023s so it's going to be a few more years before I'm booked out doing these 😂 its the nature of the work these do even 2 year old tippers look beet up all ya can do is try and keep ontop of em 👌👍

[@everdream741]

You can easily install a on and off switch on that cannon blaster

[@Mobileblaster]

Yeah it has to be a deadmans style if you drop it you want it to shut off 😬 I was waiting on delivery for my new switch 👍

[@stephenbaker5593]

Good videos!, just discovered you on KZbin!. Find the videos very therapeutic!, love seeing the transformation!, I personally wouldn't be able to stop,which I suppose could get you in trouble, and out of pocket ! Very interesting!

[@Mobileblaster]

😊👌 thank you welcome to the blast hood 🫡👍

[@Marine5974]

God work mate!! What media did you use to remove the reflective stipes? That's was a time saver.

[@Mobileblaster]

Iron silicate 👌👍

[@teamidris]

I love the twisted wires :o) The switches never last and it is very easy to fix ^-^

[@Mobileblaster]

😆👌👍

[@rossfairley6511]

I have to blast in my job but our blast machines have a dead mans handle.. I take it this is just on a switch? Or should be 😅

[@Mobileblaster]

@rossfairley6511 yeah I've got it fixed now but yeah it's a deadmans handle or should be lol. In England it's near impossible to find a electric deadman switch at a reasonable price I ordered mine from half the way round the world and it still works out cheaper by a long shot and to be fair it's only a micro switch in a plastic house I cannot justify the costs over hear 🫣

[@Motorbiker013]

Mick, you have a follower in me, incredible work. One question, what brand of helmet are you wearing?

[@Mobileblaster]

Rpb Nova 3 best I've used 👌👍

[@federicoyapura2186]

Hermoso trabajo. Felicitaciones 👏 👏 👏

[@Mobileblaster]

Thank you 😊

[@lynjames4306]

Just can't believe that you sand blast the body with a exposed tipper ram 😢 I'm lost for words as a Fitter 😮

[@Mobileblaster]

100% perfectly fine 👌 chrome rubber sillicon cannot be touched with this method of blasting 👍 plus the ram wasn't exposed at any point this wasn't lifted to the point it was exposed although it still wouldn't affect it even if I directly hit the chrome 👍

[@bernardkroeger4045]

Indeed. The small experience I have had with grit blasting, well it gets everywhere. Just my experience.

[@Mobileblaster]

@bernardkroeger4045 yeah it gets in places that I rather not mention 😂 this method once its hit the target is basically harmless that's how I know pipes rams seals etc will be fine 👌👍

[@defendermender4959]

Mick look up gum wheel/ rubber Eraser wheel for taking those decals off 👍🏻

[@Mobileblaster]

Easier than blaster? 😬

[@defendermender4959]

Hell no 😂 they won’t damage paint though.

[@tristanjames952]

Hey Mick, what kind of compressor, pot, tip are you running with that set-up? Loved the drone shots of the prep, as well as your engineering of that on-off switch!

[@Mobileblaster]

Doosan 7 120 presure pot and a 850xl 👍

[@flolot]

great job and good for the environment ( not really off course )

[@Mobileblaster]

Thank you appreciate that 😊👍👌 The co2 to replace this wagon and expense involved would be alot more so amited its looks bad but this is still the better option 👌 not to forget the media is approved recycled blasting media and the paint removed is water based.

[@stephanelacotte3144]

Very good Job 👌

[@Mobileblaster]

😊👌👍

[@Mobileblaster]

All sorted now please enjoy thankyou youtube 🫡 Please come back later Video Processing is taking longer than usual HD and 4k has failed to process and its too late to now I've sent notifications out 😢

[@PowderCoatingSandblasting]

it's good job anyway! thanks for your video

[@Mobileblaster]

@user-je8ty5yr1r 🫡 I was gutted when I spotted the error message but the notifications was sent out at least the is a video to nearly watch haha

[@michaelb.4048]

I realy like this innovative way to get micro plastic and paint particels into the Environment. Yummy ❤

[@gliderider7077]

Jesus why are you watching this then? Go lay in the street and smoke your vape pen

[@michaelb.4048]

@@gliderider7077 unfortunately I'm non smoker, so this is not possible. And 2nd video was promoted by YT, and beside the mentioned thing, I found it quite interesting. Have a nice day

[@Mobileblaster]

@michaelb.4048 the media used is approved blasting media hear in the UK. The paint removed is water based and the truck was parked on the truck owners land that dose earth removal and recycling they was happy to accept the waste (Non-toxic to the environment or carcinogenic to wildlife) saying that I wouldn't like to breath in the dust hence been well away from anyone else working 👌 I'm glad you found the video interesting please free free to have a snoop through my library or other blasting videos hope you enjoy 👍

[@michaelb.4048]

@@Mobileblaster thank you for explaining the details of the operation :-) something learned today

[@goodcrack3340]

Brilliant job 👏 roughly how many kg would you of use per hour of Glass

[@Mobileblaster]

Totally depends on the job in hand as 3x 25kgs of fine or super fine can last anywhere from 35mins to 4 hour it's what ever the job requires 👌

[@stephenkeogh5673]

find this so satisfying what would you suggest to do to get in to this job ? Any suggestions on course ?

[@Mobileblaster]

Depends on your location?

[@EzraScott-p7m]

Nice work and video Mick! How are you able to get good footage without messing up your camera?

[@Mobileblaster]

I do mess it up just keep buying new lenses lens protection isn't as good they damage alot quicker than factory lenses 👍

[@quimt.6440]

Fantástico interruptor.

[@Mobileblaster]

It's was to put me on untill the 1 I ordered turned up. The driver of this truck was on leave so it kinda had to be done this day 👍 I know it's not ideal but it worked 👌👍

[@lancpudn]

R'reet Mick, Nice job on tipper lorry 😎 Have you ever sandblasted any train rolling stock? With all the different types of vehicles, boats etc you do I just wondered if you get that sort of work too. Thanks for video mate.

[@Mobileblaster]

I once blasted a locomotive that was getting restored for a museum that was fairly easy to be fair just like a big block similar to a 20ft container but it's not something I get asked for regular basis. 😊👍👌

[@PhoneBoothLivin]

Great job! How much u charge for something like that

[@Mobileblaster]

For Business Enquiries Please Email [e-mail] Regards Mick

[@joaogustavodelimateixeira6816]

How many psi is recomended for sandblast with this equipment?

[@Mobileblaster]

100psi 👍

[@joaogustavodelimateixeira6816]

@@Mobileblaster Thanks.

[@borisfilinskiy393]

Hey Mike, i'm from Russia and appreciate your work. I've being in this bussiness for about 10years. How much do sandblasters get paid in UK?

[@Mobileblaster]

Not enough haha the US guys (the green company) that sells ready made trailers mention numbers that quite frankly a doctor or other professional would struggle to achieve. In England wages are comparable to other trades 👍 the harder you work the more you get I suppose 😉

[@Adammskii925]

Depends if you're working for someone legitimate like the man you are watching in this video or a guy who cuts every corner imaginable and second guesses every obvious suggestion you make thus setting you back even further behind than square one for example trying to apply multiple coats of chemical paint on something (that just took an entire day to blast because he makes you keep reusing the same grit that by this point is like flour and blunt and useless) then leaves it out to dry in the pouring rain all weekend with wet coats all layered on with no drying time thus giving you the pleasure of having to scrape the ENTIRE THING by hand cos it's too sticky now to blast with what is essentially icing sugar all the while you're being criticised about "your" mistake then once all is said and done your calls get ignored and you'll just have to go sell your ps4 instead cos who needs to get paid anyway right?😅😂

[@rafal7217]

How many kilos of sand was used for this job?

[@Mobileblaster]

I cannot remember for sure 👍

[@diestrunzenstrunz4103]

Aaah,now I know how micro plastic is made....

[@Mobileblaster]

Must have been a news article about this as I've had this question quite a lot lately. The media used is crushed glass and copper slag both approved blasting media and both none carcinogenic the paint is water-based. I was always told that repair was always better than replacing 👍

[@marllontosi]

Boa noite Mick , mais um belo trabalho de jateamento e edição de videos ... qual medida de bico esta usando e quantas horas levou pra terminar ? um abração e uma otimo descanso 👍🤜🙏

[@marllontosi]

ah quantos kilos de vidro vc gastou ... esqueci de falar de onde falo 😀 , sou do Brasil 👍

[@Mobileblaster]

Hi Brazil this was done with 425cfm nozzle 850 I could do with 950 but cannot find 1 at 125psi it used 12x 25kgs but I forgot to show I did quite a bit more underside not shown I didn't time it but around 3 hour 👍

[@Mobileblaster]

Plus the media that was in the pot duno how many kgs..

[@marllontosi]

sensacional Mick , o trabalho ficou top demais ... agradecer mais uma vez a atenção, um grande abraço e fique com Deus 👍🤜🙏🙏🙏😀

[@CGW11]

What colour does the blasted off paint dust have? Same as the painted surface, but lighter, or is it so fine that it’s just a greyish powder?

[@Mobileblaster]

It mixes with the media so mainly the media colour

[@CGW11]

@@Mobileblaster Ok. Is it more media than paint in the dust? If so, how much more media?

[@tbarmo]

And this is how microplastics ends up in the nature and eventually in the ocean.

[@Mobileblaster]

Maybe you should aim this at the companies that keep producing plastic? It would take some time for this to end up in any river etc as they are a land recycling company and they screen/wash soil before they send it out. Please just appreciate the work that's gone into doing filming editing and uploading for your pleasure. It's alot harder than one would think then a armchair expert pull me up all I'm trying to do is put bread on the table for me and my family hope I've cleared that up for you 👍

[@joeroad6618]

Still haven't got that mag switch working yet? saw you were still twisting wires for the dead man.

[@Mobileblaster]

😬 I don't like rushing into buying anything lol I have 1 on its way from overseas 👌👍

[@martinsmolka]

Zajímavé... Hromadu peněz na dron, gopro ap. máte, ale pár peněz na obyčejný vypínač, aby jste nemusel kroutit dráty ne?

[@Mobileblaster]

This may sound wired but every thing for youtube is and has been saved up for reinvesting into youtube so the gopros and drone are paid for from 3 years worth of youtube money 👌👍soon as it makes enough money more storage is needed but a hobby that makes a few quid can pay for its own upgrades 😊 business decisions are made from my business brain and nearly £300 for a micro switch or wait 6 weeks to import from overseas and get it at the value its worth I perfer to wait or the business head says wait 👌👍

[@andrzejporeda7281]

Super jest to piaskarka fajnie to piaskuje ile taka piaskarka kosztuje Pozdrawiam serdecznie👍👍👍👍👍

[@Mobileblaster]

😊👌👍

[@strawman9410]

Good job you didn't have any holes in the fingers of your gloves when you were twisting those wires together. Just put a switch on it

[@Mobileblaster]

Its on order 🫡👌👍

[@tatert.v.9908]

So do u paint all the things u blast too?? Also whatbis the goin rate now a days to blast? Back in my day we charged a penny a pound...lol that was what they said in all seriousness i made like 10 bucks an hour....

[@Mobileblaster]

Nah I don't paint stuff I leave that to the customer 👍 I make about as much as the next guy with a trade or skill 👍

[@1noduncle]

How much is a switch at the telegraph hut or whatever "equivalent" u got in that 3rd world over there

[@Mobileblaster]

Uk £275+ vat Australia alot cheaper including delivery 👍

[@TheGeezzer]

You keep twisting those two wires together instead of incorporating an on/off switch I take it?

[@Mobileblaster]

Yeah my deadmans switch was on order 😎

[@Mobileblaster]

This tool is used daily and if I stop when a part is on order or breaks then my money stops so I try and make do untill then it's not a simple matter of putting a switch in it needs to be very durable and deadmans type (£270) for the 1 I had and ordered to fix this 👌👍

[@loganwhite9671]

Хорошая работа.💪💪💪какой у тебя, производительности компрессор? Диаметр сопла? Какая фракция абразива ?Спасибо👍👍👍👍

[@loganwhite9671]

Какой у тебя стоит электронный клапан на бочке?

[@Mobileblaster]

​@loganwhite9671 nosel 850xl I want a 950xl but hard to find 425cfm @ 125psi and it's a home made conversation from air to electronic

[@jamesward5721]

Never un-subbed, this just popped up Mick, I clicked in and "not subscribed"..????? Hmm. Been a while since I saw a vid - you up the compressor? Hope all is good with ye. J.

[@Mobileblaster]

😊 youtube is an amazing platform sometimes I'm promoted everywhere and others just don't get shown I suppose its to make it fair for everyone 😊👌👍

[@larryperdue508]

I think a 4 dollar switch from the hardware store would help 😊😊

[@Mobileblaster]

😏👌👍 I've got one onorder from overseas as they are 300£ hear (4/500$?) So it makes sense to buy from abroad 👌👍

[@StevenLisi-wy7ml]

Did the sendblaster get more salary?

[@Mobileblaster]

Depends what your comparing it 🤔

[@sakchaisajjasuwan2635]

More dust flow in the air pm2.5

[@Mobileblaster]

😕

[@robinmarchand1211]

are you blasting with sand of metal?.

[@Mobileblaster]

Crushed glass 👍

[@jimcain7778]

Some health and safety or pat testing drone must be having kittens every time you twist and untwist those trigger wires to start and stop. Love it- do what works, “fix” it when it really needs fixing (and you have the time!)

[@Mobileblaster]

It's fixed now but I still have a backlog of videos that need making that's why it seams like a long time without a switch in reality its been about 5 to 8 working days 😎 some jobs I post in the playlist that's named unlisted content to see more stuff I blast that don't make the full channel 👌👍

[@donaldthomason4588]

Satisfying

[@Mobileblaster]

😊👌👍

[@leslieallan392]

That’s rather a unique deadman......

[@Mobileblaster]

😏 only the best is good enough 😂

[@colinsutton3640]

What type of dead man are you using?

[@Mobileblaster]

😂 none I'm just turning the wires together 😬

[@LOLO-vu9qi]

How machine remov the pants and the rust??????

[@Mobileblaster]

Compressed air pumps media in this case crushed glass and abrasively removes unwanted finishings 👍

[@derrick9635]

Wouldn't want my new tesla near this place 😅

[@Mobileblaster]

😬🫡👍

[@mohammadhossanshamsulhoque8420]

good work mee sam work Dubai

[@Mobileblaster]

😊👌👍

[@МихаилЧурилов-д1х]

Пора бы уже какую-то кнопку установить на сопло, ну сколько ты ещё будешь провода скручивать?)))

[@Mobileblaster]

It's on order 🫡👌👍

[@dockingtroll6801]

What happened to all the stripped of paint? You just leaving it on the ground?

[@Mobileblaster]

Yes it's water-based and biodegradable none toxic also the media used is recycled and a waste product that's silliac free and none toxic.

[@dockingtroll6801]

@@Mobileblaster I find it very hard to believe that this truck was originally painted in waterbased, biodegradable non-tox paint, and that all the reflective strips were biodegradable and glued on with a waterbased, biodegradable, nontoxic glue....I would imagine it to be something like an acrylic polyurethane enamel or like, which is only slightly less toxic than "industry standard" paints and still considered the main reason for asthma and allergies.... but hey thats just me..... being a painter who worked in the truckindustry for decades.... but I could be wrong...I may have worked the only place where biodegradable, waterbased, non-toxic paint and glues were not used....

[@Mobileblaster]

@dockingtroll6801 You may only purchase non-compliant 2K products if you intend to use them for industrial or agricultural uses and not for automotive purposes as this is now illegal. Since 2007 but you would know this working in this industry? So I'm fairly sure it was water based as I was the 1 to order the paint and 25 of these was ordered from Thompson body's without paint. We're would you imagine the stickers would end up of I spent alot of time pulling them off and putting them in the bin? Landfill so what's the difference hitting this land or aa council run landfill? It's still better to repair than replace for everyone involved including the environment well apart from the guys who build new trucks

[@dockingtroll6801]

@@Mobileblaster Thx for setting me right and making it clear. I am glad it has been taking care of now, and yes I have been away for a while since I am now retired, so the question was genuine enough. Thx for youyr vids and for taken the time to explain.. Good man ;-)

[@Mobileblaster]

@dockingtroll6801 not a problem 👍 everyone has an opinion and I will listen to everyone's. Some people only see the negative side but asking questions is what its all about. A lot is going off in these videos that aren't shown hence why I never say they are a how too because simple stuff to me that's a must that I do off camera is hard to explain or simply boring like every job gets its own risk assessment and method statement data sheets also daily safety checks air monitoring and quality even regular psi checks. All this is what I prefer to keep to myself as I still need to be 1 step in front of my closest competitors 😏

[@BarnLife]

Great video, how long did it take?

[@Mobileblaster]

Not very long around 3 hour

[@njcaveexplorer]

Well ! I had a Blast😂

[@Mobileblaster]

😊👍

[@Moh4n95]

Nice job 👍🏾 Mick how many hours did you toke to complete this job ?

[@Mobileblaster]

These normally take 5 to 6 hour with 260cfm last 1 tuck 10 hour with 90cfm this was 3 hours with 425cfm the costs of operating are hugely different so don't always thing bigger is better a 3 hour job could cost me more than a 6 hour job 🫣

[@Moh4n95]

@@Mobileblaster ofc how more CFM how faster you are able to do bigger jobs and like you said the down side is probably you use more diesel maybe a bit more blast media idk how much more you using then if did in 6hours with less CFM but at the other you much quicker done with your work so working wise it more efficient

[@Mobileblaster]

@Mhn-sz6yp yeah but it could be false economy because it cost more to work 🫣

[@craigkenyon1780]

wish your final product was more neat and tidy with no visible paint left so that the visible edges and crevises are crisp!

[@Mobileblaster]

Serface preparation is perfect for paint exceeding SA2.5 that's required for paint 👍

[@Barnsley_brev]

Tarn lads doin it rheyt agean old koker

[@Mobileblaster]

😎👍👌

[@x10777]

Cuanto dinero cobras por éste gran trabajo que haces.....

[@Mobileblaster]

Not nearly as much as some people may think. 😏👍

[@Rs500ybd]

This should be done in a building designed for Media Blasting My issue being the paint and 3M Reflectotape are being released into atmosphere . Not Right.

[@Mobileblaster]

Paint is water based and biodegradable media used is none toxic and the tape takes way too long to remove manually by hand eva way out side or in side the tape will eventually end up in a land fill 😕 repair rather than replace will keep this truck in operation for another good service. 👍

[@MrSaemichlaus]

Must be a pain without a proper trigger switch.

[@Mobileblaster]

😊 your right it was a pain and to find a trigger that's reasonable price in the UK was impossible I ended up getting 1 from half the way round the world and it's still worked out better deal👍

[@jamesmckay9966]

WE ALL JUST LOVE THESE VIDEO MUSICALS . YOUVE GOT MY THUMBS DOWN,

[@Mobileblaster]

👌👍 appreciate your feedback but when I leave the music out the videos get too much for even me to listen to and I'm kinda a custom to that noise haha👍👌

[@onurictas517]

What kind of abrasive do you use for sandblasting the truck bed?

[@Mobileblaster]

Anything that's cheap usually crushed glass this will depend on location because Australian garnet is cheap their but mega expensive hear in the UK haha Anything that will cut through the paint and rust usually leaves a nice profile for paint 👍

[@onurictas517]

@@Mobileblaster

[@onurictas517]

I understand glass dust so yes other abrasives are expensive I want to do this job in Turkey but lately very expensive machinery and equipment

[@Mobileblaster]

@@onurictas517 it's not lately mate it's always been expensive 😂

[@onurictas517]

@@Mobileblaster

[@ashokarora9026]

How much equipment cost to start business ?

[@Mobileblaster]

Depending on the work load you plan on doing at what rate of speed or if you want new or 2nd hand will determine all of that 👍 you could be setup blasting for a couple of grand but to do it right your looking at alot of money forklift compressor storage unit truck insurances training blaster etc etc

[@element_79]

Hello, in which country do you do this?

[@Mobileblaster]

England mate 🏴󠁧󠁢󠁥󠁮󠁧󠁿

[@element_79]

@@Mobileblaster I sent you e-mail.

[@crocodile6303]

how much does such a job cost you?

[@Mobileblaster]

Aprox 15 years to master the equipment then 15k compressor 17k van 25k other equipment forklift blast pot ya could say another 10k in pipes nosels cuppings 25k a year unit rent then the derv and media as consumables oh and not to mention insurances and services road tax then the office equipment needed to build and maintenance of the website wages for accounts and invoices I'm sure I will have missed something off as with any business small consumables are soaked up with other bills (such as helmet visors etc etc) 😉👌

[@noelandrews8209]

Hi mate just found your videos I blast tipper bodies myself

[@Mobileblaster]

😊👍👌🫡

[@RBFR01]

rust removal lazers work a lot better

[@Mobileblaster]

And how much experience do you have with either? Because from my experience I have I can say categorically that any commercial lazer cannot do this type of work. Speed efficiency and quality of the finish a laser cannot win in any category. At this moment in time

[@DjsoundPro94]

Una manera de lijar muy fácil

[@Mobileblaster]

Fastest and most efficient way I can think of 😊👍

[@DjsoundPro94]

​@@Mobileblasterasí es

[@Great_White_Hunter]

How much could a wire nut cost in your country? $0.15? $0.25?

[@Patriot0331]

Or just wire it to a little push button switch

[@Great_White_Hunter]

@@Patriot0331 Now you're talking big-money lol

[@Mobileblaster]

Haha 300£ (400/500$?) for the switch in the UK hence why its on order from over seas just takes a little while for delivery 👍

[@clausb.2032]

o my god!!!!!!

[@Mobileblaster]

😳🙂

[@CEA1]

Sandblasting is my dream job, but due to health issues it looks like im unable to do it 😢

[@Mobileblaster]

It can be done on any level this is industrial scale but blast cabinets will be more manageable?

[@CEA1]

@@Mobileblaster i just wanted to know what type of material you use ?

[@Mobileblaster]

@@CEA1 crushed glass and iron silicate 👍

[@CEA1]

@@Mobileblaster So the crushed glass & iroc silicate mix with environment (air) or they settle down in soil ? just wanted to know if it is safe. Those cabin sandblaster looks safe 😌

[@Mobileblaster]

@CEA1 yeah the products I use are recycled and a waste product none toxic and biodegradable 👍

[@Renatousa17]

🚛

[@Mobileblaster]

😊

[@อามเด็กหลังเขา]

😊😊

[@Mobileblaster]

🫡👌👍

[@Clint1hit]

👏👏👏👍👍👍👍

[@Mobileblaster]

😊👌👍

[@HOTAIR83]

Jak to Tak to XD

[@Mobileblaster]

😊

[@borisfilinskiy393]

Btw if you are interested in a experience exchange feel free to ask

[@Mobileblaster]

Oh cool please feel free to drop some tips or if you notice something I could be doing better please do so I'm more than happy to make my day easier or faster 😊

[@JIZNIspojkaPRAHA]

Where is paint?

[@Mobileblaster]

Sorry what?

[@hartmutrausch]

Hochmoderner Schalter zum einschalten des Systems an der Düse😅.

[@Mobileblaster]

😂👌👍

[@carlj3515]

👍👍👍👍👍👍👍❤️❤️

[@Mobileblaster]

😏👍😊