#rutting

[@sitaldas6865]

Being a Aspirant u changed the way i used to look at transportation engineering... U are truely an inspiration

[@SatishIITR]

I m glad you liked it. Keep watching

[@SatishIITR]

Uploading a video on highway alignment today at 4 pm. Watch it

[@sitaldas6865]

Sure sir

[@sitaldas6865]

Sir, Do you have any video regarding Application of iit pave software?

[@addisalemnew1417]

Thanks,it is a nice description.

[@SatishIITR]

Keep watching

[@sainiambika]

Thanks Sir for sharing a valuable lesson 🙏

[@SatishIITR]

Thanks DR. Ambika, Please share the link in your other groups also for more dissemination

[@shubhamkumarsingh3449]

Thank you Sir, I will be eternally grateful to you 😊. You have given amazing things about rutting, I used to always await for your more videos like this. Sir Can you please make some videos on Railways. It’s a humble request to you 🙏

[@SatishIITR]

Thanks Shubham for your suggestion. Will consider.

[@shubhamkumarsingh3449]

​@@SatishIITR Basically on Geometric Design of Railways & how the permanent way construction is done before laying the Rails

[@SatishIITR]

@@shubhamkumarsingh3449 OK

[@Abhik4117]

🙏

[@SatishIITR]

Thanks, please circulate the link in your groups

[@sayantansasmal1352]

Sir, in the definition of rutting, said that rutting failure occurred due to the vertical Compressive strain at the top of subgrade, but in the mix rutting subgrade doesn't effected. So why we are called its rutting? And also for densification?

[@SatishIITR]

Rutting on the surface is contributed by all the layers. It is found that almost half of the rutting is contributed by base and subbase and remaining half by the bituminous layers. Mix rutting occurs due to poor design of mix, gradation of secondary compaction after opening of the road to traffic. This is completely avoidable and is not considered in the design of pavements. Similarly, rutting in granual layers may be due to overloading or overstaining of subgrade or inadequate pavement thickness. The pavement design should be such that overstraining of every layer of the pavement is avoided.

[@msakshay24]

Thankyou sir

[@SatishIITR]

Thanks Dr. Akash, Please forward the link to your friends also.

[@addisalemnew1417]

How to know subgrade rutting?

[@SatishIITR]

Subgrade rutting can be determined by make a full depth cross section of the pavement.

[@mariaabramova9421]

88izih kzbin.info/aero/PLatBUqXIPJGg77ODNDckYbK6hiRP-ERW8

[@SatishIITR]

Thanks