Rvinyl Precut Headlight Tint Installation

How to Install Rvinyl Headlight Tint
Precut headlight tints are the perfect way to upgrade, protect and restyle your vehicle's headlights. Precut to fit your year, make, model and sub-model and sold as a pair, they are the ideal way to do-it-yourself and save. Here are the basic steps:
1.Prepare and clean
2.Spray and lubricate lenses
3.Remove liner
4.Alight and apply tint
5.Spray tint
6.Squeegee on tints
7.Heat the tints
8.Trim away excess
9.Allow to cure and pop any bubbles
10.Enjoy!
--Recommended Tools--
Rapid Prep
Rapid Tac
Rapid Clear
Squeegee
Razor Blade
Heat Gun or Hair Dryer
-Installation Tips-
•Ideal application temperature range is between 70º to 80º F (21º to 27º C).
•When possible, turn on your lights to help increase the surface temperature.
•Surfaces must be clean and dry prior to application.
•When removing precut smoked tint pieces from the backing it is best to continuously spray both sides of the film with an application fluid such as Rapid Tac or a 10:1 water to mild soap solution to prevent premature adhesion of the kit to itself.
•Clean your areas thoroughly with a solution such as Rapid Prep.
•Use masking tape to test for adhesion.
•If masking tape curls up and falls off you need to continue cleaning.
•Do not apply during periods of high relative humidity (i.e., when it’s raining).
•Do not bend vinyl film back and forth as this causes the adhesive to wrinkle when applying.
See the full instructions here: www.rvinyl.com...
#Rvinyl #HeadlightTint #InstallationInstructions #Rtint #Audi #Q& #BlackoutTint