Saw arrived yesterday kzbin.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and today I cut about 3/4 cord of wood with it. Make sure you get an extension chord that is at least 12 gauge wire, minimum. This is my first electric in about 10 years, and things sure have improved. The self-sharpener works great, and it just kept cutting through some pretty decent logs. Wear your eye protection, and ear protection. Excellent saw.
@Tnerbist2 жыл бұрын
*Coming up on having had this saw for a year....am a casual user and bought it to cut up sections for bowl blanks. Easy to start, **Bestfor.Garden** also recommend even after storage for a couple of months. Simple chain tension adjustment. Just cut up some 20" Osage Orange, including ripping bolts in half (at an angle). Like butter!*
@rw3dog2 жыл бұрын
Cool, I have owned my about 20 years or so….
@hazeyfla Жыл бұрын
This saw was handed down to me from my father and I absolutely hate it. It never starts and I ended up getting a pruning blade for my sawzall.
@Koby-Burbine5 ай бұрын
I hate mine too. The best solution is to buy a husky 😂
@PJBHolden4 ай бұрын
That homelike sounds great 👍
@jimmyscoffield19882 жыл бұрын
Try doing maintenance yearly, at least check and clean things. Is your fuel filter hooked up?
@bnscholet9113 жыл бұрын
Has to be missing the fuel filter for crap that big to make it in the carb. 😲
@tammydengler29493 жыл бұрын
I watched this, and that's what was wrong -w- mine. The coil lost it's correct gap. Thanks man you saved me a lot of time, and money. Pays to look at KZbin before buying unneeded parts.
@rw3dog3 жыл бұрын
I am glad I could help. Thanks for watching.
@jandelahoussaye98345 ай бұрын
What is correct gap spec?
@rw3dog5 ай бұрын
.008”
@TrappingTheMitten-JohnHowell Жыл бұрын
I'm having the same trouble with mine this summer. I'm going to check the gap and let you know. Just subbed
@Donald-em7zh10 ай бұрын
Still won't fire
@DKTractors3 жыл бұрын
That MS250 doesn’t look much different from the one I have which is only four years old
@jell4662 Жыл бұрын
Same here…. Mines a 2015
@KensSmallEngineRepair3 жыл бұрын
Someone just put one of those in back of my truck for a no start repair. Hope it’s that easy!
@rw3dog3 жыл бұрын
Let’s hope so
@809FILMS2 жыл бұрын
Currently have two waiting to be serviced
@KensSmallEngineRepair2 жыл бұрын
@@809FILMS thanks for watching!
@danielpadgett2831 Жыл бұрын
If it was full of saw dust and junk and never cleaned out of course it's going to affect the coil and fly wheel gap and dust in the carb. Just saying but regular cleaning after each use on the recoil side and the bar and chain side will prevent this in the future
@marcrogers1741 Жыл бұрын
A suggestion: Chaps, I almost got it once and that straighten me out. maybe you have them. I had a Natoonal guard Doc in Vermont tell me once he would rather see a battle field onjury than a chainsaw
@darkgrey17902 жыл бұрын
I just saved one of these from a dumpster. Same symptoms as yours. I'm going to tear it down and hopefully it will be the same problem. I have fire wood to cut and my Ryobi just won't cut it... pun intended.
@greenroomdude2 жыл бұрын
Curios how your rebuild went? I just picked one of these up for free aswell.
@darkgrey17902 жыл бұрын
@@greenroomdude I replaced the carb,filters and coil. She cuts through wood like it's butter now.
@greenroomdude2 жыл бұрын
@@darkgrey1790 right on! I will look into those parts. Thank you for your knowledge.
@billmckim65894 ай бұрын
my MS 250 won’t start up after I left it sitting in barn during winter! I emptied the fuel tank and let the carburetor dry out. Is this related to your issue? If so what’s part number you replaced?
@rw3dog4 ай бұрын
See if you have spark as step one
@franciscojaquez8555 ай бұрын
You said you gapped it to 0.800 right???
@jandelahoussaye98345 ай бұрын
.008 that's 8 tenths of a thousanth of a inch
@rw3dog5 ай бұрын
.008”
@KensSmallEngineRepair3 жыл бұрын
Gotta love the old Homies!!!
@hossskul544 Жыл бұрын
3:57 so you've had to spend all this time, all this money, ordering parts off of Amazon, spending more time to get it just to start up a chainsaw and cut some damn wood, by electric !
@davidbryant35328 ай бұрын
By electric? Really? By yourself a proper education...fuck electric tools...
@ellismidkiff61172 жыл бұрын
Fuel tank filter is probably loose and in the bottom of the tank or the tank hose has a hole in it. That’s a lot of junk in the carb.
@jimmyscoffield19882 жыл бұрын
I googled it also, it says the gap should be .12-.13 thous.
@darcyscott24062 жыл бұрын
Good job! Thanks
@josephherculespriceofmachi15582 ай бұрын
Ground wires
@renejakobsen7444 Жыл бұрын
Mine do not start - will try this. Ran last year. Thank you!
@colinlaw27802 жыл бұрын
got a ms880 in saw mill did the same thing going to take e look at the gap will let you know what happens
@larryreno82933 жыл бұрын
If the coil has been touching or has gotten closer to the flywheel your crank bearings may be bad or the engine mountings could be loose. If the engine is moving in the plastic case you case is worn.
@denisdenis2034 Жыл бұрын
on this model the coil is bolted on crankcase so the engine mount can't be responsable:)
@larryreno8293 Жыл бұрын
@@denisdenis2034 I would urge you to look at a video I posted, but I would understand if you didn’t so I’ll quickly explain. The clamshell type motor is bolted to the plastic case assembly. In the case are 4 metal bushings that the engine bolts pass through, holding the engine. The coil also bolts to the case, when the saw gets worked beyond its limits the case will wear at the point where bushing pass through the plastic. The engine, now lose and sloppy, will contact the coil.
@MissouriOldTimer3 жыл бұрын
that's really curious why that coil got closer to the flywheel, if anything I would think it would get further away,,, I really like those old EZ Homelites, I had a couple of then and a lot of XL's.
@rw3dog3 жыл бұрын
Yeah my father bought the saw new. He loves it. It runs great and gets very little use. It has a manual oiler too. The muffler is a little gone but other than that it is solid.....
@JeffCarlson-f5y7 ай бұрын
How did you adjust the gap?
@rw3dog7 ай бұрын
Loosen the coil slide it away from or toward the flywheel
@jimmyscoffield19882 жыл бұрын
Cuts like a beaver on speed. lol!
@barocioanthony9592 жыл бұрын
So no need to replace the coil? Just a re gapping?
@rw3dog2 жыл бұрын
In my case it just needed to be regapped
@santosgarcia43402 жыл бұрын
nice job joe!!
@stephendaurie93443 жыл бұрын
mine is brand new. the pull cord is to hard to pull out to start it, will be taking it back to the dealer
@JamminClemmons Жыл бұрын
Mine does the same thing but I let it sit for 2 years in my basement. I can't pull the cord. What did your dealership do for you? - Mine is strong Stihl MS-290 Farmboss.
@883greatlakes22 күн бұрын
@@JamminClemmons it's probably the recoil needs some new pawl dogs. that makes it hard to start.
@isaacbarrett92122 жыл бұрын
Awesome. Thank you for a no BS video.
@markmaetzold3113 жыл бұрын
Nice video on your experience and resolution. How does the Homelite start?
@rw3dog3 жыл бұрын
Starts good
@tractormatt43013 жыл бұрын
What ever happened to the 028 I sold you?
@rw3dog3 жыл бұрын
Ugh that POS is garbage. Has not enough compression. Needs new cylinder piston, rings etc. Needs a sprocket .... lots of money. I am tempted to get the $40 eBay aftermarket top end.
@davidmichael53113 жыл бұрын
I love them old Homelite's. I have a Super XL12, and a regular XL12, that I use every year to cut my Dad's Winter wood. He owns a big Stihl, and he is really shocked how well my Homelite's stand up to his Stihl. Only problem in comparison is the old Homelite's are a lot heavier. I guess that's why their still running and still reliable 50 years later. I have 2 Super EZ's, that I'm getting ready to rebuild the carbs on, to use as a lighter limb cutting saw.