Making A Resin Chess Board & Chess Set

Checkmate silly black and white chess boards.
The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/rybonator02221
This video is sponsored by Skillshare.
Support the channel and earn some amazing perks on Patreon! / rybonator
Join the Dice Goblin Discord! / discord
If you like twitter, I got one! / rybonator1
I also have an Instagram! / dm_rybonator
If you want to mail me something, here is my Private Mailbox Address, so you can send me stuff to look at. I can't promise that I'll review them, but I'd love to see what you make! (Or just tweet me pictures if you make something, that's nice too!)
Rybonator
3515 Longmire Dr., STE B PMB 277
College Station, Texas 77845
AMAZON AFFILIATE LINKS TO THE PRODUCTS I USE IN THE VIDEO (I get s small % kickback for purchases you make, at no cost to you :). Thanks for using these, but don't feel obligated. )
Chess Board / Set Molds: amzn.to/3sz1aGb
Envirotex Lite Resin: amzn.to/3ep4Txu (Available in gallon purchases as well.)
Alcohol Ink: amzn.to/3BGbW1g
Mica Powders: www.madmicas.com/
Zona Polishing Papers: amzn.to/2XY4VXl
Dragon Skin Silicone (More durable than the others, but more expensive.) amzn.to/2Apx8xD
Sorta Clear 37 Silicone (Not the exact same as 12, a bit more rigid.) amzn.to/3e06uJT
D&D Starter Set: amzn.to/3F6ZQPP
If you have any ideas for what you would like to see built/reviewed in the future, let me know in the comments down below! Then subscribe so you don't miss any new videos coming out in the future! Also, if you liked this, gimme that sweet sweet like.

[@nickzwa]

It may sound silly, but instead of felt. You could use clear packing tape. Its softer then acrilic so it should serve the same function, but transparent now :)

[@Rybonator]

^ This is a fantastic idea :D

[@kenabi]

alternatively the clear laminating rolls are soft, will absorb some impact stress and are still mostly see through.

[@TheNuclearBolton]

A clear 3M vinyl film used for paint protection on cars would be perfect for this.

[@TAiiNE]

When working with molds like this for the chess pieces, the best way to avoid voids is to tilt the mold to the side and pour slowly along the side allowing the resin to slowly fill in where it needs to go. Do this about halfway then tilt the mold around to help get resin into the nooks before filling it the rest of the way. Also, the best way to see how much resin you need is to just fill the molds with water then dump that into a measuring cup. Granted some molds like the chessboard can be a bit tricky but you can always dump it into a large bucket than that into the measuring cup to avoid spills.

[@Dudae_]

Regardless of density, volume is volume, especially with how imprecise this is. You can fill the molds with water and take that to a measuring cup and overshoot the mark a bit so you know you'll know the ballpark figure for resin too!

[@lcm361]

Alcohol. I don't think any resin maker wants water remotely near their molds.

[@cirrus.floccus]

@@lcm361 I have used this technique a couple of times and as long as you let your molds dry long enough after being in contact with water, there won't be problems. Usually you wanna wash your molds before you use them the first time anyways. Oftentimes there's little pieces of dust and dirt on there.

[@DimT670]

@@lcm361 meh, you just let em dry its no biggie

[@starsiadraws]

@@lcm361 Also not everyone can use alcohol for cleaning. For example, I have asthma that can be triggered by strong chemical vapors like alcohol or bleach. /notmad

[@lcm361]

@@starsiadraws damn... I hope you can find good replacements and be in peace with it

[@Nick-up9tq]

When I made this, I would fill the pieces about half way. Then squeezed from the bottom to push out the voids/ air bubbles then slowly let released letting the resin flow back in. I then popped the bubbles and then filled the piece the rest of the way with the resin.

[@SeriousSara1]

I do that too but stil get bubbles and cracks

[@tmntleo]

Oh hey I have those moulds, I made a chocolate chess set with them. The board cracked when I was getting it out but the good thing about chocolate is you can just melt it back together so that was easy done.

[@patrickhector]

Lemme guess, you eat every one of the opponent's pieces you take, winner gets the board?

[@laurenboyes7678]

@@patrickhector that is a cool idea tbh

[@xiongray]

The best part about it cracking is you can eat it.

[@michaelhoffmann7111]

This was a really unique idea that turned out great. Now I'm curious, how would you improve on the mold considering how complex some pieces are with the all the little nooks and crannies?

[@Rybonator]

Honestly the best way to improve would be to SIMPLIFY the pieces. Design them around resin - No ridges, pull the knight's nose in etc. Nothing where bubbles and voids could easily trap :)

[@Echo-Of-Noise]

I have seen some two part molds too

[@lcm361]

@@Rybonator Wouldn't a pipet help?

[@nicolesewell7795]

@@lcm361 What is a pipet

[@lanceyoungblood9267]

@@lcm361 yeah i was gonna say this, just use a pipet to force resin into the space

[@Rybonator]

Grab a MATE and play some CHESS with them! Wait... Chess... Why do they call it checkmate, it would have made for a much better pun if they called it chessmate. Then we could play some chess, Mate!

[@garionaolinger8752]

It is a pun To get a checkmate you need to make it so they dont see it coming so when it happens you tell them to look So your saying look mate... check mate... checkmate

[@jst1man]

Are you sure your not going to regret teaching your wife how to play chess? LOL

[@drake4838]

8:02 the shot is amazing

[@Rybonator]

Not Gonna Lie- I was super proud of that one

[@stillnotstill]

Holy crap. Thanks for pointing that out, Drake! I'd watched this with my screen filter on since it was night and I was relaxing for bed, so I missed that'd the first time. I'm glad I got to see that!

[@Verbatim8]

I love chess so much and have always wanted my own custom board, either made or bought and I’d love to do this! I love your content overall but this really hits home in a different way! Keep up the amazing work and have a lovely week!

[@Rybonator]

I'm glad you liked the video :) If you give it a shot, shoot me over some pictures! I'd love to see what you create :)

[@AzraelThanatos]

I've wanted to do the same...kept looking at the prince august site for a few years now and holding back because I didn't want to mess with melting pewter.

[@QuizMasterEntertainment]

This was an honestly great idea, I love making custom stuff to make it feel more personal, also the effort in the process makes you value stuff more. I'm totally putting a chest board into my must do list

[@yerwol]

With the bubbles showing up in the pieces, could you in theory put a bit of resin in first, rotate the mold around to coat the inside, and then fill the rest up so that it might have more chance to flow into the cavities in different directions?

[@Rybonator]

Yes and no - YES it could work, but by the time you get the rest of the resin in there, more air could have gotten into the gaps of the ridges. It'll definitely help, but I wouldn't say it's foolproof

[@rvaughan74]

@@Rybonator It occurred to me that you could try putting a small straw into the bubble to give it a path out of the resin allowing it to collapse. Though really it would only be effective with molds like this where you can see into them easily.

[@IRuleEverything101]

I wanna try this but with the scrabble resin mold set I saw on Amazon a bit ago lol. My aunt loves the game and I wanna make her a scrabble set for mothers day :)

[@Rybonator]

OH man, resin scrabble sounds awesome! I wanna give that a shot too

[@pippastrelle]

Ooh what a glass-like appearance on the blue resin.

[@user-ue5eo3qy9n]

Actually, I don't love gold, but it's looks so good with this absolutely amazing blue! And what did Rybowife said? Did she liked this chess set, and the colour, and the idea of playing chess?

[@Rybonator]

She is excited to learn, and LOVES the blue :) So I'll call it a Win!

[@user-ue5eo3qy9n]

@@Rybonator Cool! Good luck to her. Maybe one day she'll beat you and finally get back the lighter XD

[@mooseandsquirrel7721]

I have this exact set. If you fill a bit and squeeze the bottoms several times slowly, it will stop those imperfections from happening. I also had a dollar tree acrylic makeup holder (16 spots). It helps stabilize them when putting them into the pot.

[@Aerix]

Super cool and a lovely choice of colors. Would love to see a second attempt with a twist? Maybe painting the molds before resin, maybe floating/suspending objects or large glitter, maybe dirty pour marbeling, synthwave colors? Maybe opposite themes ocean (with fish and sea plants) vs volcanic ( obsidianish bottom with lava like tops)

[@moonlight5050]

Fantastic project....love playing chess 😀 Re the bubbles in the mould...could you put a little bit of resin in then squidge it about with your fingers first then top it up..? Great project 👍 👌

[@Rybonator]

That's how I had to get the bubbles out of the Knight's nose section :) Also thank you!

[@moonlight5050]

@@Rybonator to be fair I knew you would do that....daft comment from me really...!!! 🤣🤣🤣 You know your stuff 👍👍

[@rachelhughes8487]

my mom got me this same mold for christmas! I can't wait to use it

[@Socrates458]

I’d like to see more resin projects like this from you. I appreciate you going out of your comfort zone with something like this.

[@Kristanite]

I've used these kinds of molds before but it was always shown to me that the lines were really to have guidelines for painting, I'm so impressed with how it turned out with actually pouring resin into them. Going to have to try that next time.

[@Jerroxix]

Based entirely on what I've learned watching your videos for about 2 years now, a good way to avoid the voids might be to fill the pieces up slowly, part by part, to have resin sink to ends without air getting stuck. That or modify the molds to be more stable so you can slap the top to make the resin sink to the bottom like you did with your old molds in 2020. Man, I wish I could do that. I wanna do a Lime Green and Jet Black Chessboard set with the tiles being gold and white. Thanks for the non-dice resin content Rybo! Would love to see more.

[@johnc1963]

You should make Mario Kart item box dice!

[@Rybonator]

Oh that's actually really cool! I like that idea

[@johnc1963]

@@Rybonator I’ve had the idea for a while, but I’m very new to resin casting so I don’t think I could pull it off myself. XD

[@beanny0268]

I love that you did this, because I have chess and Rumikub molds that have been sitting in my cart just WAITING for my next paycheck and I love watching as many videos as I can before attempting a new mold, LOL.

[@juliasherwood697]

YES i’ve been wanting to make a resin chess set!

[@Rybonator]

The molds make it super easy :) Give it a shot!

[@Echo-Of-Noise]

I have been wanting to try these molds for a while, thanks for doing this video, I might get them now that I see they work well

[@Rybonator]

They are really nice :) Definitely worth it for only $20

[@nicolelavigne1700]

It looks fantastic! Gorgeous set.

[@kirstindavis7025]

I have this same chess mold. For the voids in the ridges, fill the mold just past the ridges or anywhere also that gets voids and squish the mold wherever you can see a bubble. You can also go in with a toothpick and work the bubbles out as you pour.

[@pedro_8240]

Next time make a board with an induction coil inside and put one of those wireless LEDs on each piece, bonus points if you manage to put RGB LEDs inside to make the pieces extra fast.

[@ItsTheGofa]

Wow I love the colors you chose, they go together perfectly. Really impressed by how the pieces turned out, and the board looked amazing. Great job Rybo !!!

[@1970ADH]

I had the little divets on my Pawns, so I put a little bit of resin back into the mould and then pushed them back in. The next day I pulled them out and the divets were filled😁 The Knights on the other hand, I had trouble filling the bottom jaw of the horse😒

[@rebeccasabourin6193]

Love to see more of these. So good.

[@Rybonator]

Thanks Rebecca :) Glad you liked it!

[@SPIDERx-cl5qj]

“Chess is just the original tabletop game” I love it, so true!!

[@11thShadowDragon]

That transition was flawless, and surprised me but pleasantly x'D Been a while since I've watched one of your videos, glad you're still goin' at it! Resin is still a suuuuper tempting hobby... oh the things I could make.

[@Verity_Reigns]

This set is so lovely! I hope Rybowife enjoys learning how to play and that you two can have many epic chess games together.

[@lifestyleofapennypincher7309]

I love your detailed commentary. Thanks

[@WhydTheyChangeOurNames]

This is beautiful and I saw on a box for a silicone mold I used that they used a chess piece and my first thought was "that's going to have bubbles" so I'm glad my inexperienced self let a pro like you prove that for me lol.

[@antonianosanta]

Very cool job! The board looks gorgeous

[@jacoblemmert8382]

Are we going to get a chess goblin now?

[@Rybonator]

He is the KING who munches on Pawns ;D

[@truffeltroll6668]

Man, i love that blue. Great project! (I'd love to see that colour again)

[@lemmonsinmyeyes]

I play alot of chess, never thought of making a set, now I'm really keen on the idea, thanks for sharing!

[@travissoules4572]

I did these exact same molds a month ago or so, you can get rid of the voids in the ridges quickly by pressing/running your thumb around the ridges of each piece as you go. Since the molds are partially clear you can also just spot check for them and press them out when you see them

[@Sootielove]

These are gorgeous! The colour combinations go so well together, you're lucky as husband and wife

[@coucamaya]

Hey Rybonator drop a few drops of menthylated spirits (I think you guys call it denatured alcohol) into the mold before pouring your resin. I use molds like this all the time, and it helps break that surface tension and removes bubbles from those small recessed areas. The alcohol will then just rise to the surface as you pour and can be burn off with a lighter or it will just evaporate on its own

[@waynethewinewizard]

I really love this channel! I’ve gotten inspired to make my own dice and resin projects. Have you ever made a clear resin dice roller tower? If not would love an Instructional video on it!!

[@mekamo7358]

Totally loved your humor 😂 and the board lol

[@subject_phoenix4043]

That is the most satisfying thing when you pulled up the board mold and showed how smooth it was too, chef’s kiss

[@mirrorballmusings]

That sparkly blue came out so nice! 💋👌🏾 What a great board.

[@HeavenlyBeast89]

This turned out beautiful! I was wondering if you've ever made a matte set of anything? Could you possibly do a video on that?

[@AllTheWayLiveFrom_215]

this came out beautiful. i just made my first one last night and its not this pretty. im gonna try again!!!! thanks for sharing

[@__8120]

Oh my god that board looks absolutely amazing

[@lordquinn1605]

Beautiful Chess Set

[@Rybonator]

Thanks Quinn! Glad you like it :)

[@mrregularword4329]

That’s so cool

[@Rybonator]

No u :) Also thank you!

[@WylochsArmory]

Beautiful

[@jaxophone9057]

Great vid as always ryb!

[@Rybonator]

Thanks Jaxson :) I appreciate that!

[@xxPenjoxx]

I'm normally of the same opinion as you (team gold every time) but dayum that blue looks so good! Definitely worth the extra time removing the bubbles, they look like glass. Awesome project 👏

[@isaacramirez3729]

This chess set looks awesome!!

[@blazehammer192]

That blue is spectacular

[@Rybonator]

Thanks! I always like that style blue with the liquid glitter :)

[@nolzymama]

I would love to see you make The Royal Game of Ur out of resin (the true original tabletop game)!

[@vinceb9310]

Really nice job

[@ShatoraDragondore]

An idea to help with the voids. You said you would take a tooth pick to your box mold and lift and push resin to make sure it got under the lip. Would doing something like that, squishing and pushing on the molds help to get resin down in the nooks and bits. Perhaps doing smaller layers rather then one go?

[@jacobwashington7658]

I enjoyed the video, and the way you cut that sponsor in was absolutely amazing.

[@celestevolschenk9110]

Oooo pretty! I want to try making this! The set came out really nice! I can imagine the many many stunning possibilities, like including dried flowers into the pieces and the board! Amazon doesn't ship to my country, sadly so I'll need to find an alternative.

[@teagan_p_999]

AliExpress? They have tons of cheap resin molds.

[@kcarson4275]

Rybo, I made chess pieces with very similar molds about 6 months ago as a gift. To minimize the voids, I poured resin about 1/3 of the way in the molds. I then gently squeezed the molds to allow any trapped bubbles to rise before I filled them all the way. Used pvc pipe fittings to hold the molds upright in the pot..

[@wesleyboyer6654]

I like to squish molds like these as i pour in the resin. It squeezes the air out and pulls the resin in deeper when you release them.

[@kairon156]

Haven't played Chess in a while but I do appreciate a well made set like this one.

[@jadertot2080]

Honestly, if that board has the right grid measurements, then it has some serious D&D map potential.. Either a clear resin one to show a printed map underneath, or maybe fully detailed with terrain like dirt and grass or rocks for fun. Do you know if dry erase marker works on resin? Hahaha

[@wavydre8547]

Yeah this is cool to see, I also made a chess set when I first started getting into this resin stuff. Haven’t made a 2nd one yet because of the insane amount of resin it uses haha. Edit: yeah the open faces aren’t great but it’s easy to sand flat of there’s any bubbles etc.

[@marcinbaczynski6954]

I have those molds. In places that you expect the voids to create I was filing half of the mold, then squeezing it with my fingers so the trapped air moves up and then I added the rest of the resin to the top. +Pressure pot. To secure them from tipping I used some plasticine

[@ivy.t.t]

Hell chess is the original wargame, not just any tabletop game, knights as a good mobile unit, pawns for the front line, fortresses, kings and queens, they just happened to have fallen into a very abstract design, although wikipedia essentially writes the definition in a way specifically to exclude chess

[@Windex451]

Chess board mold doubles as terrain mold? Not sure it would work or be worth the effort but that's always what I think when I see a grid.

[@brennanrodriguez122]

You say they don't tell you the volume you need, well here I am to give you the greatest hint of your LIFE Pour water into each mold you wanna fill, then collect all the water in something with measurements. Use that for volume. It also helps because it exposes issues with how the molds will hold fluid when full if there are any, which is much better to find out with water instead of curing resin.

[@garyl3609]

Try squeeze the silicon mould gently to remove any bubbles. It was suggested

[@ashtenchacon5303]

aaaw making it w both ur favorites colors to teach her how to play!!!!! i hope she liked it and u guys had fun playing chess together!!

[@lcm361]

Amazing work! Loving the glamour shots. About the bubbles in the pieces mods. Wouldn't a pipet do the trick? Applying resin slowly and getting to the details by directing the flow of the resin.

[@emmatheavengerpeel]

Thank you I wanted to make my partner his own custom chess set and this guide is fantastic

[@amberstar7530]

This makes me want to learn to play chess

[@Rybonator]

It's a classic for a reason - and you can always find people to play :)

[@woodsy2232]

for anyone who does not have a vacuum, you can also boil a jug of water wait till its hot but not hot enough you cant put a finger in. put in your cup of resin in to the hot bath and let it deegass it, wont get all of it out and can speed up your resin depending on its temp

[@Little_Miss_Carrex]

Showing what the result are without a presure pot or vacuum chamber is very much appreciated!

[@steveskinner8088]

Squeezing the bottom of the chess pieces will push air to the top. A vacuum pot is critical to pull all the air from the epoxy to get solid pieces.

[@Zaqinabox]

This is dope!

[@russellyowell6255]

I really like the blue pieces

[@nayabaya09]

so i just bought this mold set and found that if you squeeze the chess pieces when you add the resin, you will fill those voids Good work Rybo!

[@dragondungeon6986]

I would to see if this would work with one set of the spaces being filled with like, family photos or favourite dnd artwork or something. It could be such a cool way to use the resin to make something really unique and special!

[@QuarionGalanodel]

I don't know how well it will work but for the top-heavy ones you could try putting them into dixy cups and then filling around them with vey fine sand. That would help them stand upright but I don't know if the sand might deform the final product if the mold walls are too thin.

[@jonflanagin6682]

Easy way to check volume is to pore water into the molds, then pore the water into a measuring cup.

[@brandonjenkins6062]

I bought the same chess mold myself. I pretty much did the board the same way. But I've found on the pieces, if you pinch the bottom of the mold and fill about a quarter of the way up then slowly unpinch, it will pull the resin into those voids getting all those hard to fill areas. On some of the pieces (king and queen mainly) I found I had to pinch 2-5 times to get all the cavities completely full. Appreciate your work and great ideas, keep it up!

[@brandonjenkins6062]

I also got the checkers pieces as well to go with and they look great as well. Easy to do.

[@radamentro]

I think that if you pour slowly at an angle to let the resin push out the air, you would minimize the chance of catching bubbles at the bottom of the mold.

[@lisaroper421]

It looks so cool! I am glad your wife is looking forward to trying! Chess is not my favorite strategy game, but ya gotta know it a bit!

[@WarlordSh4Dow]

Hey Rybo, I've found the best way to find out the volume of resin I need for a new mold is fill them with water, then pour them all into a measuring cup. Just got to make sure they're all dry before pouring the resin in! Hope that helps save some resin or stress in future!

[@drake4838]

Thats an intresting idea

[@Rybonator]

Hope you like how it turned out :)

[@allenhardin7037]

Pinch the tops just pour a little bit of resin in then pinch the tops to force out the air bubbles then fill the rest of the way.

[@AwninGod]

You could always figure the amount of resin required by filling the molds with water and then measuring the amount of water it took.

[@seanlindblad8251]

I was literly going to sculpt and mold and make a custom chess set. This is perfect timing.

[@blackbelt379]

Thx

[@roxoriginal732]

Little tip how to handle the voids.when you pour the resin into the chess piece mould get a tooth pick in there and prod the bottom of the mould to push that resin in and release the air from it .works well .love the set you done good job and clear resin,think I’m gonna invest in one of these moulds 👌👌👌👌

[@martjanamoon1785]

You got my like at the first few seconds, these look soo good!! I am wondering, would brushing some more silicon onto the molds increase their durability? Because then they aren't as flimsy and maybe would be less likely to rip/tear or so (I think I've seen something like "brush-on-silicon" at Bobby Duke Arts youtube channel, but my actual knowledge about resin and silicon is soly from youtube videos, so I don't really know how everything works in reality)

[@hunterpowers2568]

This is different, COOL!!!

[@Rybonator]

The ORIGINAL tabletop board game :) Glad you like it!

[@woodsy2232]

yo i just got the same molds my self i have done 3 tests so far, to avoid the holes very easy either use a toothpick and mix it around the bubble area ooor squeeze the mold softly around the areas prone with holes, most of the time its the horses lower jaw, pawns rims/top, castles tops or rims, crown and cross, its a 1 to 5 min job depending on how you take it and and bubbles want to work with you, i just got my first perfect backline done today and am so happy also no i do not have any kind of pressure device all hands and a simple smoke shop jet lighter for top bubbles.

[@jst1man]

Other things you can do to get bubbles out are start little pour and finish big so you can shift the resin. Also isopropyl alcohol is good for pooping bubble and you don't have to watch it.

[@jamesdriggs4951]

I use an LED flashlight on the table to observe the ridges and can see the bubbles or air pockets easily in the ridges. I fill the mold to just above the ridge and squeeze the bubbles to the top. I use a small long bar (one used to scoop mica powder) and reach into the top of the rook, bishop, king and queen to force the resin into it. Then I put them in a mold holder I found on Etsy and finish them off. It takes me about 130ml to do a complete side